Maintenance Operator
Resume:
NORIEL A. SARMIENTO
Room ***, Al Arab Bldg. Jamal Abdul Nasser St.
Al Majaz, Sharjah
BLK. 6 Lot 25 Lynville Homes, Bagumbayan Sta. Cruz,
Laguna Phils. Philippines
Email: acuucu@r.postjobfree.com
Objective: To contribute any of my work experiences and education to
the company / government for my personal career and growth.
STRENGTH AND SKILLS:
Eight years experience as Mechanical Technician
Six years experience as Technical Operator
Three years experience in Baggage Handling System
SCADA Operator Experienced.
Experience in Food Manufacturing Operation
Experience in Good Manufacturing Processing
Understand Basic Pneumatics
Fabrication and pipe fitting
Maintenance and trouble Shooting .
Two years experience as Machinist cum CNC Machinist
5S, Safety and Environment Coordinator for five years
Internal Auditor in ISO 14001 & OSHAS 18001
Team Leader in Energy & Water Conservation Project, also as MBU Leader
Conduct Hazard Identification, Risk Assessment and Determining Control for Safety and Aspect and Impact.
WORKING EXPERIENCE:
Mechanical Technician
O&M of Baggage Handling System
Siemens Dimatics Middle East, LLC
Dubai Airport, Dubai UAE
August 15, 2012- Present
Duties and Responsibilities
Attend faults during trouble at baggage handling System
Conduct Weekly, Monthly and Annual Preventive Maintenance
Communicate to the BHS Control Room in case of trouble in BHS System
Ensure safety during trouble and attending the fault.
Fabrication of material if needed incase that parts is not available.
Pipe Fitting, assembling and disassembling of parts.
Conduct preventive maintenance motor shafts, bearing and drive unit
Repair and maintenance of gear box unit
Welding works for fabrication of some material.
Replace belt in case of damage and any parts of the equipment
Do lacing and vulcanizing of belts if needed.
Perform workshop works.
Replace shaft or motor if needed
Mechanic/General Operator cum Safety Coordinator
Nestle Philippines Inc.
Nestle Nutrition Department - Cabuyao
March 2002 to March 2012
Duties and Responsibilities
Assist Production to set up star wheel during Start Up and during trouble.
Troubleshoot any problem in case of any breakdown in the production area.
Replace gasket, bearing and any mechanical parts of Equipment during long shutdown and year end shutdown.
Fabricate material if needed if the material is not available yet.
Conduct checking of air pressure in pneumatic equipment and troubleshoot incase of deviation and malfunction.
Conduct steam leaks and water leaks checking periodically.
Lubrication of all gear and mechanical part of the equipment based on the maintenance plan.
Prepare material using AMM system.
Apply lock out tag out when conducting maintenance
Replace of motor or rectify the motor
Check and maintain PHE, HPP and centrifugal
Check and maintain of Tanks, valves, conveyor, separators, pumps, Homoginizer and etc.
Relieve Operator in operating Spray Drying operation.
Checking equipment during operation.
Monitoring of powder/ product movement inside the equipment
Monitoring of safety system of the equipment to prevent any emergency situation.
Operate Wet/ Dry Mixing and wet Processing Equipment, based on the target parameters. Encode in the system time to time activities such as operating parameters monitoring (PFDMS) and SAP – G.I.
Conduct manual cleaning during Intermediate Cleaning/ Cleaning In Place After running per cycle.
Conduct minor trouble shooting and adjustments.
Conduct maintenance of equipment when its schedule including change oil and its filter with the help of co-worker.
Encode in the system time to time activities such as operating parameters monitoring (PFDMS) and SAP – G.I.
Conduct manual cleaning during Intermediate Cleaning.
Maintains cleanliness of all equipments based on NGMP and sanitation plans& Standard
Attend 8 min. meeting every start of the Shift.
Technician- Mechanical
Samsung Electro-Mechanic Philippines
August 1999- February 2002
Tantal Dept.
Duties and Responsibilities
Checking of equipment on a daily basis.
Relieved operator during breaktime.
Conduct trouble and mechanical adjustment.
Conduct troubleshooting during trouble.
Replace heater every long shutdown.
Conduct change of gear for cutting equipment during change of product.
Help operator to set up the marking of product during change of product and or after long shutdown.
Conduct inspection of equipment in daily/weekly/monthly basis.
Change of oil of equipment every 6 months.
Conducts daily and weekly preventive maintenance of the machine.
Machinist
Ebara Benguet Incorporated
Pittland, Cabuyao Laguna
June 1996- May 1998
For Lathe/ CNC Machining
Check what product to be run.
Ask controller for material to be run.
Get the drawing and check its specification.
Sharpen the tool bit both for RM and finishing, set it up to machine.
Set up raw material in lathe machine using 3, 4, or 5 jaw.
Set the material to center using dial indicator and make some adjustment when needed.
Ensure safety of the metal when running and cutting of piece
Check the drawing and start machining the casing
Always check the cut using vernier caliper and micrometer.
Cut all sharp edges of the metal after machining
Set up raw material in CNC Machine.
Set the material to center of the CNC Machine .
Sharpen the tool bit both for RM and finishing, set it up to machine
Check load program in the machine
Start machining of first metal piece and check the measurement of the product based on the drawing and required measurement.
Adjust the program if needed, and check the cut after adjustment.
If all required measurement are correct, conduct mass machining of metal cast.
Always check the cut using vernier caliper and micrometer after completing of program in every machining.
EDUCATIONAL BACKGROUND:
College :
CC Technological Institute
San Pablo City
Bachelor of Science in Industrial Technology
Major in Automotive Technology
Graduate
A.Y. 1996-2000
Vocational:
Don Bosco Manpower Training Center
Canlubang, Laguna
Industrial Mechanics Technology Course
Graduate
A.Y. 1995-1996
Secondary:
LagunaCollege of Arts and Trades
A.Y. 1990-1994
Elementary:
Calios Elementary School
1984-1990
PERSONAL INFORMATION:
Birth Date : December 12,1977
Birth Place : Sta. Cruz, Laguna
Civil Status : Married
Religion : Roman Catholic
Father’s name : Mr. Vicente Sarmiento (deceased)
Mother’s name : Mrs. Leonora Agus
Known Language : English / Tagalog
Contact this candidate