(CONFIDENTIAL)
CURRICULUM VITAE
NAME & ADDRESS : (Mr.) SUPRIYA MUNSI
“Chhaya”, 547 Sindhiya Nagar,
P.O. Durg - 491 001,C.G., INDIA
PROFESSION : Instrumentation Engineer
CONTACT PHONE No. : 00 91-788*******, M : 00 91-882*******
E-MAIL ADDRESS : acuq18@r.postjobfree.com
PASSPORT NO. : J5996239 (valid till 12 June 2021)
DATE OF BIRTH : March 02, 1954
MARITAL STATUS : Married
QUALIFICATION : B.Tech (Instrumentation and Electronics Engineering, 1977,
from Jadavpur University, Calcutta), First Class (Hons.) .
EXPERIENCE : Above 30 years in Process Instrumentation & Controls.
TRAINING : [i] DCS training at Supplier’s works (Singapore)
(Details in following pages) [ii] O & M training at Principal’s Plant (U.S.A.)
[iii] ‘Instrument Technology’ training at BARC
[iv] Computer
EXPERIENCE PROFILE
* Design, Detailed Engineering, Vendor co-ordination.
* Management and Supervision of Construction and Commissioning.
* Development of workshop for Quality control and Maintenance.
* Inspection and Testing at Supplier’s works.
* Maintenance, Technical Support Services, Safety Auditing.
* Knowledge of wide variety of Instruments and Control equipments.
* Experience of core industries (oil & gas, power, chemical, petrochemical,steel, etc.)
* Conversant with relevant standards, software, safety/hazardous area requirements
* Tender evaluation, negotiation with suppliers.
* Engineering consultancy, plant modernization, hot change-over.
* Multi disciplinary technical co-ordination.
* Technical liaison with Govt. and Insurance agencies.
* Interview / candidate assessment, supervision and training of technical personnel.
* Ability to work both independently and as a team member.
* Effective interpersonal skill and communication ability in both oral and written form.
* Systematic development and maintenance of technical documentation.
1/ 5
Equipments handled
Pneumatic and Electronic instruments: Transmitters (Smart & Conventional), Controllers, Control Valves & Accessories, ESDV, Signal converters, Analyzers, Analyzer skids, Analyzer house, Sample Conditioning System, Calibration & Reference Gas System, Indicators, Recorders, Annunciators, Scanners, Sensors, Switch Devices, Primary elements, Fire & Gas detectors, Electronic modules of various types (Analog switch, mV/mA, SQE, Resistance/mA, pH analysers, etc). Relays & Timers, Regulators, DCS (Operator Station, Field control station, signal conversion and marshalling cabinet, hard copy unit, printer, etc.), Fieldbus, PLC, Control Panels, Local Instrument Enclosures, JBs, various types of Cables, Tubes, Impulse Piping, accessories and erection materials.
Make of Equipments
Rosemount, Foxboro, Fisher, Masoneilan, Neles-Jamesbury, Mokveld, Taylor, Eckardt, Honeywell, Beckman, Horiba, MSA, L&N, Kent, Uniloc, Rexnord, Schlumberger, Panalarm, E&H, Moore, Yokogawa, Daniel, Krohne, Ashcroft, Degussa, Bailey, Allen Bradley, Magnetrol, UE, Mobrey, Asco, Sirco, Klinger, Lapp, Phönix, Swagelok, etc.
Other Equipments
Precision test & calibration equiptments of W&T, Heise, Budenberg, Druck, Ametek, Rosemount,
Altek, Bellofram, Dwyer, Jofra, Foxboro, Fluke, etc.
EMPLOYMENT SUMMARY
PRESENT
Company Name : India
Period of Service : 15 years (July’97 till date, interim periods)
Type of Industry : Engineers, Constructors & Consultants.
Position : Senior Consultant (Instrumentation)
Responsibility : Addition, Modification, troubleshooting of plant C & I, Design,
Procurement Assistance, Training/ Appraisal of Personnel, Vendor
Drawing review, Maintenance Planning & Supervision, Client/Vendor
Co-ordination, etc.
PREVIOUS
I.Company Name : SABIC, Jubail, Saudi Arabia
Period of Service : 3 years (March 2006 to May 2007) AND (Aug’10 to Sept’12)
Type of Industry : Petrochemicals, Chemicals, Fertilizer, Steel, Power, etc.
Position : Instrument Design Engineer
Responsibility : Design engineering services for SABIC affiliates : preparation of
concept development pkg, front end engg pkg, detailed engg pkg,
construction pkg,vendor drg review, bid evaluation, tech co ordn,
tech procedure development, training junior engrs, interview /
candidate assessment, etc. (Ask for detailed project list)
2/5
II. Short term/ Deputation : (a) Worked as “Estimating Engineer – Instrumentation” with Kent Overseas Ltd., Kuwait (Sept-Oct’05 ). Job- tender evaluation.
(b) Worked as “Design Engineer (Instrument)” with ABB, Abu Dhabi for ADMA-OPCO Offshore Gas Development Project (Oct-Dec ‘04). Job –detailed engineering & review of vendor documents.
III.Company Name : Chiyoda Corporation, Abu Dhabi, U.A.E.
Period of Service : 9 months (July’96 to March’97)
Type of Industry : Oil and Gas.
Position : Instrumentation Engineer
Responsibility : Construction, pre-commissioning & field engineering for
instrumentation and controls of ADNOC GUP Expansion project,
Ruwais, Abu Dhabi.
IV.Company Name : Nagpur Alloy Castings Limited, Raipur, India.
Period of Service : 1 year (November’94 to October’95)
Type of Industry : Steel Plant (in collaboration with M/s. Shougang, China)
Position : Manager (Instrumentation and Automation)
Responsibility : Implementation of Phase-I instrumentation and control systems of
pig iron plant and auxiliaries.
V. Company Name : Belleli Saudi Heavy Industries, Saudi Arabia.
Period of Service : 8 months (September’92 to April’93)
Type of Industry : Oil and Gas
Position : Instrument Supervisor
Responsibility : Construction, pre-commissioning and field engineering for instrumenta-
tion and controls for SAFANIYA GOSP-4 a Saudi ARAMCO project
(offshore gas and oil separation plant) execution by consortium
consisting of M/s. Belleli, M/s. Snam-Progetti & M/s. Saipem.
3/5
VI. Company Name : Thai Peroxide Co. Ltd., Thailand
Period of Service : 3 1/2 years (February’88 to August’91)
Type of Industry : Chemical Plant (Hydrogen Peroxide manufacturing) in technical
collaboration with FMC, USA.
Position : Instrumentation Superintendent
Responsibility : a) Pre-&Post-award detailed engineering (preparation of Spec.,
bid evaluation & award, various project drawings, instrument
index, cause & effect, logic, schematic, loop wiring, termination
layout, cable schedule, etc.)
b) Construction and commissioning of plant instrumentation and
controls, field engineering.
c) Development of instrument workshop with facilities for
calibration, testing and repair.
d) Provision of comprehensive maintenance and engineering
services.
e) Engineering for expansion project.
f) Engineering consultancy for other plants in the co. group.
Training : a) 45 days training at FMC plants in USA.
b) Training on DCS (CENTUM) at Yokogawa’s works, Singapore.
Also did Factory Acceptance Test for this system.
VII. Company Name : National Thermal Power Corporation, India.
Period of Service : 6 years (February’82 to February’88)
Type of Industry : Thermal Power Plant.
Position : Assistant Chief Design Engineer (Control & Instrumentation).
Responsibility : a) Design, detailed engineering and technical co-ordination for
control, instrumentation & data acquisition system of Boiler,
Turbine, Thermal cycle & Plant auxilliaries for RSTPP 3x200 MW 3x500 MW projects.
b) Inspection at supplier’s works.
c) Engineering services at project site for construction, commissionin and post commissioning period.
Training : Various short courses and seminars on instrumentation & control
systems.
VIII. Company Name : Department of Atomic Energy, Govt. of India.
Period of Service : 3 1/2 years (August’78 to February’82)
Type of Industry : Atomic Energy (Fast Breeder Test Reactor)
Position : Engineer - SO/C
Responsibility : a) Design & detailed engineering for plant instrumentation and
controls (Non nuclear).
b) Inspection at supplier’s works.
c) Development of Instrumentation laboratory with facillities for
calibration, testing and maintenance.
Training : One year (July 1977 to July 1978) as Trainee Engineer (Instrument
Technology) at Bhabha Atomic Research Centre, Govt. of India.
4/5
Other employments : a) Period – Oct.’95 to June’96. Started work of consultant,
and breaks but postponed due to employment in U.A.E.
b) Period – May’93 to Oct.’94. Break due to personal and family
matters (extensive refurbishment and repair work of residence,
various investment related work, etc)
c) Period – Sept.’91 to Aug.’92. Migrated to Australia, did part time
job (non-paying) for about four months, and came back to India.
Computer Training : (i) Diploma in Computer Operating (Fund., DOS, Windows-98, MS-
Office:MS-Word, Excel, Power Point) . Internet
(ii) Auto-CAD
AFFILIATIONS : a) Corporate Member, Institution of Engineers, India.
b) Graduate Member, Institute of Engineers, Australia (Eligibility
to apply for Corporate membership).
LANGUAGE SKILLS : a) English : Read, write and speak fluently.
Bengali : Read, write and speak fluently
Hindi : Read and speak reasonably well.
REFEREES : a) Mr. D.K. Lahiri
Chief Design Engineer (Instruments)
Humphreys & Glasgow Consultants Pvt. Ltd.
Gammon House, Savarkar Marg,
Prabhadevi, Bombay - 400 025
Phone : (022-***-****
b) Mr. A.K. Sarkar
Deputy General Manager
Yokogawa Blue Star Limited
7 Camac Street, Calcutta - 700 017
Phone : (033-*******/2425752
PERSONAL : Music, TV, Swimming, Reading, Chess, Physical exercise, Football,
Cricket.
COUNTRIES VISITED : Thailand, USA, Singapore, Australia, Saudi Arabia, U.A.E., Kuwait.
WORKED WITH : Nationals of India, U.S.A, U.K, Japan, Germany, Italy, Holland,
Philippines, Thailand, Singapore, Arab nations, Australia, China
5/5