` ADETU Abiodun Lawrence

No.** Okeybanjo street, Off Cement Bustop. Ago Palace Way, Okota, Lagos.

TEL: 080********; D.O.B: 28/12/83;

Marital Status: Married

Email: acuoep@r.postjobfree.com

OBJECTIVE

I am a self-motivated and high achieving individual, aiming to be part of a team of determined individuals burdened with the quest to solve the challenges that confronts us in other to have a more assured Energy Reserve. Determined to obtain recognition as a Field Professional Engineer, My outstanding experience in the field of Oil and Gas has availed me more awareness and more cost effective ways of getting desired results in any task set before me.

SUMMARY

Good background in ICT training leading to my passion to get certified in my specialization.

Remarkable Experience in Quality Management System and Cost Reduction Strategy.

Excellent Skills as a Chemical Engineer.

Conformance to H.S.E Rules and Undergone various Safety Onshore and Offshore Trainings in the EPC Sector.

ACCOMPLISHMENTS

CERTIFICATION SCHEME FOR WELDING INSPECTOR LEVEL II (CSWIP 3.1) Level II (71342) IRCA CERTIFIED PROVISIONAL AUDITOR - 6010705

Actively Partook in ASME Stamp Certification 2012: Cert # 1167 –Daewoo Accreditation Close-out, Pre-commissioning of 40’’ Pipeline Project – DN 51 Project Fabrication of Ughelli Export Gas Scrubber Pressure Vessel- UUED Project Fabrication of Adibawa Slug Catcher Pressure Vessel – UUED Project Excellent worker of the month award (May 2011) DN58 Project EXPERIENCE

Client: Total Exploration & Production Nig. Ltd. (TEPNG) Employer: Nigerdock Nigeria PLC FZE

Project: OFON Phase II Project Duration: August 2014 –Present Location: Snake Island Free trade Zone, Apapa Lagos Scope: EPCC2 of Two (2) Wellhead Platforms (OFD3 & OFD5) and Two (2) Access Bridges, (OFP2-OFP1

& OFQ-OFP2) and Piping Appurtenances.

Designation: Welding Inspector

Responsibilities

Elaborating and enforcing/implementing of project specific procedures, codes/standards and welding specifications.

Review cause and effects of welding defects and take remedial actions.

Coordination with the field subcontractors and the Third Party NDT Inspection Company for implementation of Project Quality requirements.

Review of the radiographic film and all NDT reports on a daily basis.

Taking part in audits of the approved Third Party NDT Inspection Company.

Reviewing the inspection and testing plans and procedures for Radiographic, Dye Penetrant, Magnetic Particle, and Ultrasonic inspections prior to start of production.

Witnessing of welder qualifications testing and procedures qualification testing.

Carrying out remedial repair welding and ensuring appropriate quality requirements are met.

Reviewing of the welding summary reports, Inspection records, Consumable & Material Certs and other records to ensure conformance to Quality Plans and Quality Manual.

Checking the hydrostatic test packages for NDT compliance prior to testing.

Advising the site subcontractors with regards to welding and testing.

Monitor any Post Weld Heat Treatment on site and review the completed test reporting.

Selection of welds for non- destructive testing as per their percentages

Monitor the control and issue of welding electrodes

Overseeing all welding activities on site and making appropriate daily records and following up with appropriate NDTs.

Actively harmonize the revision of drawing to meet with the modifications on site for final (ASB dossier) documentation

Updating of DBI (Database Information) of Weld Progress and review repair rate to ensure adherence to Project Quality Objective.

Coordinate the issue of nonconformance reports through the site QC manager

Complete site quality instructions to sub- contractors when required and closely monitor on adherence to HSE & Quality requirements.

Client: Chevron Nigeria Limited

Employer: Hyundai Heavy Industries Limited

Project: Domestic Supply Obligation (DSO Project) Duration: August 2013 –July 2014 Location: Snake Island Free trade Zone, Apapa Lagos Scope: Meren (Jackets, Bridges, Tripod) and Sonam Offshore Jacket,Topside(Maindeck,Cellar, Living Quarters), Bridge.

Designation: QA/QC Engineer / Welding Inspector

Responsibilities

Ensuring all welding Procedure specifications, Inspection and Test Plan, ISO Drawings and all relevant QC documents are issued, monitored and followed to the latest.

Witness/Sentence welders Qualification Test (WQT) and Monitoring PQT procedures ensuring accurate records

Overseeing all welding activities on site and making appropriate daily records.

Monitoring of Daily production and preparation of all Documentations as required.

Interface with third party NDT Contractor on Film interpretation and acceptance criteria in accordance with code and specification.

Carrying out dimension checks, visual Inspections and Non destructive Inspections on all joint fitup and after welds in accordance to requirement of the code.

Sound knowledge in Controlling of Document and Records.

Ensuring the implementation of requirements of ISO 9001:2008 as regards Quality Management System.

Coordinating of NDT on completely welded Joints, marking of weld repair areas and ensuring qualified welder adheres to weld repair procedure.

Documentation of Day to Day welding Activities, and Monitoring/ Analyzing Weekly progress reports vis a vis welding repair rate analysis.

Ensuring good interpretation and Conformance to WPS as per Structural Code AWS D1.1 standards.

Verifying that the measuring and monitoring instruments/welding machines are duly calibrated.

Tracking of daily welds against weldmaps in accordance to the non destructive tests being carried out on them.

Inspection of Pipe Materials for defects (Carrying out ovality checks, thickness checks, pitting test and ensuring they are in good condition before welding operation.

Carrying out at intervals 2nd Party Audits to the Subcontractor (Nigerdock) in other to check their conformance to ISO 9001 2008 requirements.

Observing Internal Audits of subcontractor and ensuring all audit findings are assigned appropriate disposition methods and closed out.

Client: Chevron Nigeria Limited

Employer: Corrosion Management Services Ltd – West African Ventures Ltd Project: Escravos Gas Pipeline Project Phase 3A Duration- Jan.2013 – July 2013 Location: JASCON 2 & JASCON 30 Pipe-Lay Barges, Offshore Escravos and Okono Fields Scope: 24” & 16” Pipeline

Designation: QA/QC Welding Inspector /Infill Coating Inspector Responsibilities

Preparation of Material Requisition and Procurement of all HDPU infill Materials and Equipment needed on the barge.

Monitoring of Daily production and preparation of all Documentations as required.

Planning and Actualization of Management Project Objective on the barge.

Preparation of all Procedures, Actualization of all required Procedure Qualification Test and closely monitoring personnel’s compliance attitude to approved procedures.

Interface with third party NDT Contractor on Film interpretation and acceptance criteria in accordance with code and specification that concerns the Pipelines.

Sound knowledge in Controlling of Document and Transmittal issuance.

Coordinating of NDT on completely welded Joints, marking of weld repair areas and ensuring qualified welder adheres to weld repair procedure.

Documentation of Day to Day welding Activities, and Monitoring/ Analyzing Weekly progress reports.

Ensuring good interpretation and Conformance to WPS as per ASME Sec IX and API 1104 standards.

Verifying that the measuring and monitoring instruments/welding machines is duly calibrated.

Ensure the relevant documents such as route sheets; WPS, drawings, etc are available with the welders or operators during work.

Inspection of Pipe Materials for defects (Carrying out ovality checks, thickness checks, pitting test and ensuring they are in good condition before pipelay operation. Employer: Daewoo Engineering & Construction Nig. Ltd Project: Utorogu-Ughelli East Domestic Gas Pipeline Project (UUED DN-58) 2010 – DEC. 2012 Scope: 2”, 8”, 6”, 12” Pipelines, Piping Fabrication & Pressure Vessel Fabrication Ogu Base, Yenagoa, Bayelsa

Designation: QA/ QC Engineer

Responsibilities

Preparation of reports on Sites and also Inspection of ongoing Welding procedures on the Site.

Preparation and Reviewing of all Quality Procedures in accordance to the client’s code and universal applicable codes.

Coordination of all Quality Procedures to be approved for Construction prior to start of Pipe lay activities.

Coordinated Inspection of all Materials needed for pipelay activities ensuring conformance to SOPs and Client Codes.

Ensuring the implementation of requirements of ISO 9001:2008 as regards Quality Management System.

Conducted Procedure Qualification Tests (Welding Processes, Coating).

Conducted Mechanical Testing and Non Destructive Testings as required by the Code.

Preparation and Control of all Documentations and ensured all parties are involved.

Remarkable experience in welding and inspection of pipelines, facilities (piping) structural steel welding, and Pressure Vessel welding.

Sound knowledge of the welding processes (SMAW, SAW, FCAW and GTAW) and associated materials (consumables).

Ability to inspect the welding processes visually and sentence accordingly.

Ability to follow the various plant codes in the facility scope of work.

Ability to follow the NDT testing methods (RT, MT, UT and PT) in welding inspections.

Sound knowledge in Controlling of Document and Transmittal issuance.

Assisted the construction coordinator in the inspection of the various welding units, performed periodic onsite process Audits to check conformity to requirements of ISO 9001:2008.

Monitored the welding equipment and evaluated the machinery in accordance to the guidelines.

Sound Knowledge in Dimensional checks and analysis of pressure vessels, line pipes, pipings and structural parts as stipulated by the codes tolerances.

Carried out all checks and Tests to ensure the quality of the Products eg: Dimensional Tests, Hardness Test, Load Tests, Strenght Tests, Holiday Tests e.t.c.

Regulated all the pipeline work such as inspecting the joints and the surface finish of the product.

Carried out Field Coating for 12’’, 8’’ and 6’’ already welded pipes and also carried out quality testing on it like Peel Test, Pin Hole Test, and Holiday Test on Coated Joints.

Closed out Spools for Coated Joints for the Purpose of Making Traceability Reports and updating of all records of closed out spools for Handover and Signing off Document Purpose.

Carried out periodic Internal Audits and Issuance of Non-Conformance and Corrective Action Reports (NCR/CAR).

Coordinating of NDT on completely welded Joints, marking of weld repair areas and ensuring qualified welder adheres to weld repair procedure.

Documentation of Day to Day welding Activities, and Monitoring/ Analyzing Weekly progress reports.

Client: Shell Petroleum Development Company

Employer: Daewoo Engineering & Construction Nig. Ltd (2008-2010) Project: Eastern Gas Gathering System –EGGS 2 40’’ Pipeline Project – Swamp Job Scope: 40” Pipeline and Piping Fabrication

Designation: QA/QC Trainee Inspector (Welding, Coating, Piping, Material)

Close Out of Spools, Documentation and Interpretation of Process Instrumentation Diagram

(P & ID), Isometric Drawings, Spool Drawings and Support Drawings.

Ensuring all welding Procedure specifications, Inspection and Test Plan, ISO Drawings and all relevant QC documents are issued, monitored and followed to the latest.

Making of Test Packs for Mainline and In-plant Piping Processes for the Hydrostatic Pressure Test and Piping Inspection Gauge Recordings.

Witness/Sentence welders Qualification Test (WQT).

Carried out line Inspection/ Walk down, Flushing, Hydro test, Pigging and Gauging.

Monitored all welding procedures in the line for conformance and took appropriate actions in situations that depicts non-conformance. Review of Coating and QC procedures, monitoring. contractor in all aspects of pipelay activities during flowline,Returnline,Bulkline and testline pipeline PE coating installations and reporting production status and quality issues to senior management.

Review of all third party contractor coating procedures and visit to the Bredero shaw coating facilities.

Carried out Field Coating for 40’’ and all other diameter of already welded pipes and also carried out quality testing on it like Peel Test, Pin Hole Test, and Holiday Test on Coated Joints.

Responsible for all documentation and procedure review, expediting and putting in place approved procedures prior to any coating PQT’s or coating operations taking place and also managing local QC personnel.

Coordination of overall Site PE Coating and Concrete coating activities and overseeing of Thirdparty Bredero shaw concrete coating yard and confirming that they are produced in accordance to requirements of the procedure.

Overseeing all inspection test procedures for all coating activities i.e PE Coating / Concrete Coating all required test Eg Peel Strenght Test/ Bond Adhesion Test, Impact Test, Salt Test, Pin- Hole Test (Holiday Test and Leak Test.

Supervision of Surface preparation, Grits application and paint coating on all In-plant Spools and facility Equipments making sure they conform to the requirements of the coating procedure and carrying out Pin-Hole Leak Detection Test using the Holiday detector and also carrying out Adhesion tests to prove it Bond Strength. SKILLS

Review of Material Test Reports (MTR), Mill Certificates, Certified Test Reports e.t.c in conformance to applicable codes and standards.

Inspection and Test Procedure Qualification demonstration on all aspect of Coating in Pipelines and In-plants in Offshore and Onshore Project.

Preparation of Weld Maps, Travellers, Welding Procedure Specification, Welder Qualified Lists and review of all documents prior to production weld.

Preparation of Spool drawings for In-plant activities.

AutoCAD

Microsoft Office Suite (MS Word, MS Excel, MS PowerPoint, Visio, Project)

Inspection Skills – Destructive and Non Destructive Testing

Hysys

Interpretation of all Drawings and Supervision of all fabrication works for Conformance and Quality

High Visual Acuity and Remarkable sense of Judgment.

Interpersonal Skills and Hardworking in nature.

EDUCATION

B. Sc Chemical and Polymer Engineering (2008)

Lagos state University

Diploma in computer and networking engineering (2007) IMT computers Ikeja, Lagos

National Youth Service Corps (NYSC)

I.T CERTIFICATION

Cisco Certified Network Associate (CCNA) 2008

SAFETY TRAININGS & CERTIFICATIONS

Basic Offshore Safety Induction Training (BOSIET) 2012 Helicopter Safety Escape Training (HUET) 2012

Confined Space Entry (2012)

Safety Training for Line Management (2011)

Basic Fire Fighting Course (2009)

Permit to Work Training (2009)

Nigerian Institute of Safety Professional (G.H.S.E) 2011 Nigerian Institute of Safety Professional (Advanced H.S.E) 2011 SPDC Swimming Survival Certificate 2011

QUALITY CERTIFICATIONS

REGISTERED WELDING INSPECTOR

QMS ISO 9001:2008 LEAD AUDITOR CERTIFICATE

CERTIFICATION SCHEME FOR WELDING INSPECTOR LEVEL II (CSWIP 3.1) Level II NDT LEVEL II CERTIFICATE (RT, UT, MT, PT)

PROFESSIONAL MEMBERSHIPS

Nigeria Society of Chemical Engineers

Association of Welding Inspector Membership No: R/84430

Society For Petroleum Engineers Membership No: 3372076

Junior Chambers International

Polymer Institute of Nigeria

Nigeria Gas Association

Institute of Chemical Engineers Membership No: 99923720 PERSONAL

Available for assignment worldwide

REFEREES:

MR. JAE DUK LEE MR. THOMPSON AGIDI

QA/QC MANAGER QA/QC Engineer

DAEWOO E & C LTD NIGERDOCK NIG. PLC

UUED DN 58 PROJECT OFON PROJECT

acuoep@r.postjobfree.com acuoep@r.postjobfree.com 080******** 080********

Contact this candidate