Electrical Machine Operator
Resume:
Brandon K. Harper
*****************@*****.***
Pentair, Houston, Texas
Journeyman Electrician
December 2015-March 2016
Installed and terminated heat trace systems, ran conduit, pulled wire, and terminated 277v panels.
MPG, Houston, Texas
Welder Helper
August 2015-December2015
Used grinder to grind pipe welds. Assists welders in welding, brazing, thermal
and arc cutting activities. Lifts, moves, and holds, or claps work pieces to table, into jigs, or into position as directed, manually or by using hoist, pry bars, wrenches, hammer, and wedges.
Ardent Services, Deer Park, Texas
Journeyman Electrician
May 13, 2015 - Aug 02, 2015
Measure, cut, bend, thread, assemble, and install electrical conduit using rulers, measuring devices, hand tools, pipe threader, and conduit bender
Pull wire into cable trays, operate JLG, Sissior lift
Mitech, La Porte, Texas
Journeyman Electrician
Mar 14, 2015 - May 11, 2015
Build mcc terminate transformers,start stop, lcc cabniets, build cable trays. fiberoptic tray ect...basic journeyman electritian work
terminate mi cables run heat trace simiconducters run ridged pipe,in charge of wire pulls
Pentair, HOUSTON, Texas
Journeyman Electrician
Jan 02, 2015 - Mar 02, 2015
1. Install and repair wiring, electrical fixtures, power equipment, and components of machinery and equipment following electrical code, manuals, specifications, schematics, and blueprints.
2. Install and repair control and distribution apparatus, including motors, relays, switches, thermostats, circuit-breaker panels, etc.
3. Install and connect power supply wiring, cables, conduit, and electrical apparatus for machines and equipment in new and existing facilities following diagrams, schematics, or blueprints.
4. Diagnose and resolve problems in electrical circuits, systems, and equipment using testing instruments and equipment.
5. Test continuity of circuits to ensure compatibility and safety of components using testing instruments.
6. Measure, cut, bend, thread, assemble, and install electrical conduit using rulers, measuring devices, hand tools, pipe threader, and conduit bender.
9. Select material and hardware and make time and materials estimates.
Insteel Wire, DAYTON, Texas
Machine Operator
March 01, 2014 - Jan 15, 2015
• Operated mill, lathe, drill, automatics, hone and lap, numerical control equipment and burr efficiently and safely
• Read blueprints, work from layouts and dimensions on drawings to perform assigned tasks
• Loaded, aligned and operated machines per drawing instructions
• Utilized micrometers, vernier calipers, overhead crane and hand tools
• Weighed ingredients to specific quantities using calibrated scales and balances
• Monitored machines for problems and troubleshooted problems
• Checked raw materials for quality and quantity ahead of loading into machine
• Prepared raw materials to be loaded into the machine
• Prepared tooling for changeovers and performed machine changeovers.
• Followed production instructions of supervisor to ensure quality
• Interacted with customers and visitors
• Carried out basic calculations with aid of a computer and calculator
• Followed written instructions and batch records
• Maintained quality and quantity with strong sense of accountability and high standards
• Completed relevant documentation
• Cleaned and maintained equipment and work area
Parker Hannifin Corporation
Press operator
Jan 1, 2013 –Feb 1 2014
High performance team lead responsible for creating power points showing improvements, gains, losses, and scrap totals presented to plant manager and group leads quarterly.
Member of the safety committee responsible for identifying hazards n preventing accidents weekly meetings with all safety members.
Operate press producing rubber oilfield parts.
Nibco, NACOGDOCHES, Texas
Assembly Worker
Aug 15, 2012 - Oct 25, 2012
1) Calibrate thermostats for specified temperature or pressure settings.
2) Clean internal compartments and moving parts, using rags and cleaning compounds.
3) Connect regulators to test stands, and turn screw adjustments until gauges indicate that inlet and outlet pressures meet specifications.
4) Disassemble and repair mechanical control devices or valves, such as regulators, thermostats, or hydrants, using power tools, hand tools, and cutting torches.
5) Dismantle meters, and replace or adjust defective parts such as cases, shafts, gears, disks, and recording mechanisms, using soldering irons and hand tools.
6) Examine valves or mechanical control device parts for defects, dents, or loose attachments, and mark malfunctioning areas of defective units.
Heatex Industries, LUMBERTON, Texas
Boilermaker tourq n tension tech
Mar 16, 2012 - Jun 14, 2012
tourq n tensin bolts in motiva chemical plant. Examine boilers, pressure vessels, tanks, or vats to locate defects, such as leaks, weak spots, or defective sections, so that they can be repaired.
Bolt or arc weld pressure vessel structures and parts together, using wrenches or welding equipment. .
Inspect assembled vessels or individual components, such as tubes, fittings, valves, controls, or auxiliary mechanisms, to locate any defects.
Repair or replace defective pressure vessel parts, such as safety valves or regulators, using torches, jacks, caulking hammers, power saws, threading dies, welding equipment, or metalworking machinery.
Attach rigging and signal crane or hoist operators to lift heavy frame and plate sections or other parts into place.
Hi-Tech, LA PORTE, Texas
Scaffold
June 01, 2010 - October 01, 2010
• Responsible for interpreting client instructions and building a scaffold that meets all client specifications and safety regulations.
• Responsible for visiting active work sites and inspecting scaffolding.
• Assisted in creating safety inspection reports to be submitted to company's regulatory compliance department.
• Assisted in regular scaffolding inspections and submitting reports to regulatory compliance department.
• Was part of a team that was responsible for erecting scaffolding that met client specifications and still stayed within safety guidelines?
build industrial scaffolds in chemical plant
CLP, DEER PARK, Texas
Electrician
Mar 01, 2008 - May 01, 2010
Running e m t, terminations, pulling wire, MCC terminations. Maintains at reliant park 2 months. General electrical, residential, commercial, and industrial experience.
Repair or recommend replacement of electrical appliances, including commercial ovens, ranges, steam tables, washers, dryers, etc.Receive and complete work orders.
Ludco Electric, Nacadoches, Texas
Apprentice Electrician
Sep 01, 2007 - Mar 01, 2008
Reads, interprets, and executes drawings, schematics, blueprints, and electrical code specifications to see layout of commercial electrical equipment installations.
Tests electrical and equipment and parts for continuity, current, voltage, and resistance Installs, repairs, or replaces AC/DC motors and drives, transformers, motors, starters, relays, and hydraulic and gas electrical controls. Installs repairs, or replaces electrical wiring, receptacles, switch boxes, conduits, feeders, fibre-optic, and line assemblies, lighting, and alternative electrical parts Installs, repairs, or replaces generators and industrial storage batteries.
Do preventive maintenance and testing of electrical systems (including power distribution equipment) Installs electrical circuits, as well as panels, conduit, protecting devices, switches, and equipment required to accommodate the CEC and/or NEC.
Works on electrical failures and replaces components wherever production time is often affected Corrects connections and wiring on equipment controls wherever incorrect applications may cause harm and dangerous conditions.
Commercial/residential - wiring, pulling wire, hook up boxes, ran pipe, terminations, fixtures.
Direct Electric, Pasadena, Texas
Apprentice Electrician
June 1 2006 - Aug 01, 2007
Basic Electric knowledge in Residential and Commercial applications. Ability to use appropriate tools and diagnostic equipment to repair, install, replace and test electrical circuits, equipment and appliances. Repair or replace wiring, equipment and fixtures using hand tools and power tools ensuring that work is in accordance with relevant codes. Excellent ability to work from ladders, scaffolds, attics, or in tunnels and crawl spaces. Perform physically demanding tasks, such as digging trenches to lay conduit and moving and lifting heavy objects. Confident under pressure and a quick learner. Commercial/residential pulling wire, running pipe, terminations, hookups.
US Navy, Coronado, California
Air Craft Handler
May 02, 2003 - Jan 04, 2006
Aircraft Handler- in charge of safe movement of all aircraft on ship, making sure the planes are in the right place at the right time ready for action. Operating the lift that brings the aircraft from the bay to the deck. Working in foul weather out to sea in many different environments. Chocking n chaining down aircraft. Also trained in firefighting and damage control.
Contact this candidate