Resume

Sign in

QaQc coordinator E&I, HVAC

Location:
Indonesia
Posted:
April 15, 2016

Contact this candidate

Resume:

Updated :**/**/***** / ** CV JAKA MARTIN

CURRICULUM VITAE

Jaka Martin

B.Eng majoring Electrical Engineering

Contact Person : +628********* or +628**********

Email : acudoe@r.postjobfree.com

OBJECTIVE

I would like to take this opportunity to briefly introduce myself at some time. Explained MISSION and VISION, duties etc as professional worker specifically Quality Inspector and Electrical

& Instrument.

I am assertive, reliable, strong desire, highly motivated, hard working person, quick learning, independent, adaptable, and trustworthy. I have good interpersonal skill, analytical skill, communication skill, and able to work under pressure.

I am Good leadership and able to interface effectively with all level a cross functions Organization.

Make Quality is Priority for management & Client.

Willing traveling and ready to be assigned on project site

Team work & Communication

Available to join immediately

COMPLEX, HAZOD,NEC,IEC, TCD, KPI,ITP, 7 waste, 7 tool, Sig sigma ( Alean Six sigma ), 8 D Problem solving Quality, SAC, ITR, Coordinate Housekeeping, 5W 1H,,QCC activity, Kaizen SKILL ACTIVITY and KNOWLEDGE

13 years’ experience in handling Management Engineering and Inspection for Oil and Gas projects ELECTRICAL AND INSTRUMENT, TUBING STRUCTURAL Equipment, Wellhead and involving Offshore

/ Onshore equipment and Processing project

Knowledge Electrical, Instrument mechanical, Competition (ITR,ITP,SAC,Dossier),Wellhead Control Panel Instrument Document, Calibration & Function test instrument, Pneumatic Control, Instrument control, Hookup instrument and Actuator, Testing Tubing, Instrument material selection, Instrument Speculation, Commissioning & Star Up, Mechanical Completion Inspection Test Report, Hazardous Area, Filed bus, Heat Tracing, Cable termination & cable gland, Cable Pulling/Segregation, Vendor package Inspection, Factory Acceptance Test (FAT), Installation

(Installation support tray, Equipment), Fabrication (Fabrication support Equipment, Support cable Tray, Gland, Support Panel)

Updated :11/04/20162 / 11 CV JAKA MARTIN

Good in Quality Management System (QMS) and Audit implementation; Quality Assurance/Quality Control activities, Inspection (visual, dimensional, Mechanical Testing)

Good in HSE Management System ( PRO SAFE, HAZOD POWER ELECTRIC )

MEMBER TEAM QUALITY INSPECTOR On ORGANIZATION INDONESIA

COORDINATOR IMPROVEMENT

2002 2003 : Yoshikawa asTeam

2010 2011 : Flextronics as Support Team

2011 2013 : NOC as Coordinator / Leader

2013 2014 : Citra Shipyards as Leader

LEADER REDUCE COST (TCD) on NOC

TEAM SUPPORT KPI ( KEEP PERFORMANCE INDICATOR ) On CITRA SHIPYARD Summary Experience 13 years

Responsible for Material Incoming GRN or MRN “Good receive note “During MRIR “Material receive Inspection Report “.

Coordinator QC, and Subcontractor right way

Pre commissioning and Commissioning load and Soloran ( Un load) Motoric motor Pump Responsible for the entire project installations and it’s testing and commissioning work inspections from start to end of handing over

Supervising for all slab floor wall work E/L Conduit for high, low voltage and low current as per site requirements.

Responsible for all Electrical and ELV installations as low & high voltage systems Power, Light, Emergency, Conduit, Wiring, Cable trays, Trucking’s, RMU, Transformers, Risers, Panel installations, MDBs, SMDBs, DB dressings, Cable Glandings, Terminations, Cable pulling’s, ATS, Generators, Bus bars, Transformers, Switchgears, Lightning protections, Earthings, etc. Responsible for checking of contract and work done as per contract value and time. Witness the material as per site requirement and make orders also check store. Witness the installation & Cable ladder, cable tray conection to Control room, Main Circuit Center ( MCC ), I/O ESD Cabinet, I/O PCS Cabinet, Generator, Compressor, Dry, Cooler, Transfer Pump, Metering SKID, Chemical Injection, Separator, Crude Oil Pump, Flare, Knock out Flare, H2s Stripper Column, & gearbox against approved construction drawing.

Witness all Inspection Test of all LV, MV cables, and other equipment E&I refer to the Test Pack’s or Work Pack’s.

Good working experience in follow up for executes with MEP contractors for Electrical & ELV works. Good experience in Low current systems installation, testing and commissioning for Telephone, CCTV, Audio Visual, Intercom, SMATV, EMCS, DAS, PA Systems, Fire alarm, Emergency, Nurse call, Novec, Access control and Security Systems.

Good experience in witnessing for Insulation Resistance tests (Megger Tests), Hypo Test of cables and RMU, Transformer tests prior to Energization of Sub Stations etc. Good experience in formulation and review of QA/QC document (ITP, Quality Plan, Method Statement, Procedure etc.) according to Project specifications, International standards and codes. Good organizational ability to leading a working group of quality circle and site team to achieve the project goals and objectives

Monitoring all work with Engineers, foremen, charge hands, technicians, store in charge on daily basis as per site planning.

Attend daily and weekly progress meetings with main contractor, sub contractor, project consultant and client.

Updated :11/04/20163 / 11 CV JAKA MARTIN

Preparing weekly reports and forwarding to concerned Project Manager and Site Managers. To ensure Human Safety Environment Regulations applied in every steps of the E & I works Coordinate with Purchase Department / Supplier / Manufacturer’s for the document which required for the Material Approval.

Preparing and Raising observations / NCR to site engineers and sub contractors. Replying and closing all NCRs / SDRs with proper corrective and preventive measures. 1 Period : June 2015 – Present Karimun islands Indonesia Company : OIL TANKING

Position : QAQC Coordinator E&I, HVAC

EPC : Indian Oil Tanking

Sub cont. : RCS, GARTE, MCD, MDS, COLDFINE,MFT

Vendor : ABB,Tranfoil, HIT,

Job Description

Coordinator QC, and Subcontractor right way

BUILDING, all TANK (01, 02, 03, 04) Jetty area witness all of Electrical & Instrumen system and Sub system.

Re coordination START UP, PRE COMISIONING and COMISIONING system and Sub system Outside inspection Factory Acceptable test (FAT) and Make it report Inspection Release Note

(IRN)

Responsible for Material Incoming GRN or MRN “Good receive note “During MRIR “Material receive Inspection Report “.

Witness the material as per site requirement and make orders also check store. Witness the installation & Cable ladder, cable tray conection to Control room, Main Circuit Center ( MCC ), I/O ESD Cabinet, I/O PCS Cabinet, Generator, Compressor, Dry, Cooler, Transfer Pump, Metering SKID, Chemical Injection, Separator, industrial Oil Pump, Jokey Pump, Fire Pump system Transformer, gearbox against approved construction drawing. Witness all Inspection Test of all LV, MV cables, and other equipment E&I refer to the Test Pack’s or Work Pack’s

Pre commissioning from wellheads, Electrical power supply incoming from 33KV sub marine cables, main transformers 33/6.6KV. Dry trafo. ABB. Safety boats, H.V. transformer and switchboards provided by ABB. Low voltage switchgear ABB. Fire detection. Pre commissioning and Commissioning load and Soloran ( Un load) Motoric motor Pump 2 Period : February 2015 – May 2015 Arab Saudi IRAK U.A.E Company : Bureau Veritas at IRAK

Position : E&I Inspector

Client : Wheatherford

Job Description

Coordinate with construction, and Subcontractor right way Witness the installation & Cable ladder, cable tray conection to Control room, Main Circuit Center ( MCC ), I/O ESD Cabinet, I/O PCS Cabinet, Generator, Compressor, Dry, Cooler, Transfer Pump, Metering SKID, Chemical Injection, Separator, Crude Oil Pump, Flare, Knock out Flare, H2s Stripper Column, & gearbox against approved construction drawing. Updated :11/04/20164 / 11 CV JAKA MARTIN

Witness all Inspection Test of all LV, MV cables, and other equipment E&I refer to the Test Pack’s or Work Pack’s

Preparing weekly reports and forwarding to concerned Project Manager and Site Managers. To ensure Human Safety Environment Regulations applied in every steps of the E & I works 3 Period : June 2014 – January 2015 Cepu & UK Indonesia U.A.E Company : schlumberger

Position : QA/QC Engineer Electrical

Client/Owner : Exxon mobile, MCL

Project : Early Oil Expansion facilitator (EOE)

Job Description

Responsible for the entire project installations and it’s testing and commissioning work inspections from start to end of handing over.

Witness and Responsible for all Electrical and ELV installations as low & high voltage systems Power, Light, Emergency, Conducting, Wiring, Cable trays, Trunkings, RMU, Transformers, Risers, Panel installations, MDBs, SMDBs, DB dressings, Cable Glandings, Terminations, Cable pullings, ATS, Generators, Bus bars, Transformers, Switchgears, Lightning protections, Earthlings, etc.

Witness Verify the installation & Cable ladder, cable tray connection to Control room, Main Circuit Center ( MCC ), I/O ESD Cabinet, I/O PCS Cabinet, Generator, Compressor, Dry, Cooler, Transfer Pump, Metering SKID, Chemical Injection, Separator, Crude Oil Pump, Flare, Knock out Flare, H2s Stripper Column, & gearbox against approved construction drawing Coordinate with construction, and Subcontractor right way 4 Period : April 2013 – December 2014 Batam Indonesia Company : Citra Shipyards

Position : QA/QC Engineer Electrical

Project : SPOB, Tugboat, CPO, Tanker, FBSO

Job Description

Appreciate Trial Test SEA, DOCK Trial all functional equipment system Electrical & Instrumentation

Patrol Checking daily the installation cable & pipe connection to main engine & gearbox against approved construction draw

Safe and efficient operation of all electrical equipment and associated systems, including high frequency PMR work, documentation reporting and Log Keeping duties. 1st line maintenance, repair, inspection, fault finding on Power Generation and Distribution equipment ranging through High Voltage/Low Voltage/Extra Low Voltage Equipment throughout the Installation Topsides. The range of equipment includes, but is not limited to the following: Updated :11/04/20165 / 11 CV JAKA MARTIN

a) Power Distribution Systems including Emergency Power Generation, Switch gear, Motor Control Centers, Transformers, Motors, Cables, Battery Systems, Chargers and Associated Equipment. Critical Power Distribution.

b) UPS Systems, Battery Systems and Chargers and Associated Control Equipment. Witness / Conduct Inspection of all E&I device’s according to class, owner specification and Standards (Merger Test, Continuity Loop Check, High Potential Test (HIPOT)and load test 4 Period : July 2011 – July 2013 Indonesia

Company : NOK

Position : Senior Supervisor

Job Description

KICK OFF MEETING to operational start up. Responsible for: administration Quality, safety, planning and progress steps .Relations and co ordination. Roof access and any administrations involved. Final issue

Improvement Cost with system TCD and KPI

Coordinate with construction, and Subcontractor right way Preparing weekly reports and forwarding to concerned Project Manager and Site Managers. To ensure Human Safety Environment Regulations applied in every steps of the E & I works 5 Period : June 2010 – June 2011 Indonesia

Company : Flextronics

Position : Supervisor

Job Description

Full completion of routine tests: overload, over speed, less of running diodes, earth fault, Over current. 100% of setting tests of HV & LV breakers and switchgears components/ Battery charger

Preparing weekly reports and forwarding to concerned Project Manager and Site Managers. To ensure Human Safety Environment Regulations applied 6 Period : December 2007 December 2009 DOHA U.A.E Company : Mitsui Engineering & Shipbuilding Co. Ltd Position : E&I Inspector

Project : MAN B&W S50ME B

Job Description

Identify and Rectify any mislead documents regarding Electrical & Instrumentation Work as a team.

Coordinate with construction, and Subcontractor right way Witness material Carry Over raised by contractor due to material deviation and work out with Field Engineer to solve the problems.

Witness and Participate in Procedural test’s to all E & I Equipment's, such as: Loop Test, System running, Start Up.

Updated :11/04/20166 / 11 CV JAKA MARTIN

Coordination with subcontractor, main contractor when apply job what should be do before Start Up and Simulation Test.

Directly responsible to the Company Site Representative on all engineering, planning, commissioning, material and all other technical service essential to support the construction activities at the offshore Work site.

7 Period : April 2006 – April 2007 Batam Indonesia Company : PT.AEI (Angkasa Engineers Indonesia)

Position : E&I Inspector

Project : TANBURUP

Job Description

To arrange daily Electrical inspections with consultant after internal inspection of work. Witness the material received from the supplier to ensure that material are according to the specification & Offered the same for Consultant Approval and follow up with consultant till approval.

Coordinator QC, and Subcontractor right way

Pre commissioning from wellheads, Electrical power supply incoming from 33KV sub marine cables, main transformers 33/6.6KV. Dry trafo. HOLEC. Safety boats, H.V. transformer and switchboards provided by Merlin Gerin. Low voltage switchgear MITSUBISHI.HVAC. Fire detection.

Coordinate with construction, and Subcontractor right way

>> Confirm As Build Condition is Recorded, Prepare, Review & Sign of all outstanding record and issue Release Certificate within doc Completed Punch List, FAT Doc.Completions: Confirm As Build Condition is Recorded, Prepare, Review & Sign of all outstanding record and issue Release Certificate within doc Completed Punch List. Review & Verify with Client all works completed successfully and ensure that Report/Record as per Certification Requirements

Review & Compile All Field Electrical Record for Project Documentation. 8 Period : April, 2004P –December, 2006 Indonesia

Company : PT.SMOE

Position : QA/QC (Electrical & Instrumentation)

Project : TUNU, Kuba, KERISI WHP K Conoco Phillips at SMOE Indonesia, Job Description

Witness and Review Inspection & Test Plan (ITP), Review Electrical Layout, Dimensional Check, and Checked Fit – Up preparation, Visual Checked for Electrical & Instrument Support Installation, Megger Test, Continuity Test, and Function Test & Pressure Leak Test. Coordinate with construction, and Subcontractor right way 9 Period : 2002 – June 2003 Indonesia

Company : PT.YOSHIKAWA BINTAN

Position : Process Engineer

Project : Project APL KMZ, Hitachi

Updated :11/04/20167 / 11 CV JAKA MARTIN

Job Description

Utilities unit. 2 steam turbines driven ALSTOM alternators 25MW/15KV. Pre commissioning, Commissioning, start up and exploitation. Training of local operators Coordinate with construction, and Subcontractor right way REFERENCE

Name

1 STEVEN GOH

SR.MANAGER

+659******* and +628**********

Email: acudoe@r.postjobfree.com

2 IBNU ZIAD

QA/QC ASST MANAGER PT.CITRA SHIPYARDS

+628********* and Email: ibnu_ziad@cssgroup batam.com EDUCATION the Best Certificate Compilation (Could be seen on the below ) The Best Certificate Compilation (Could be seen on the below )

Bachelor Degree (B.Eng) University of Sriwijaya : Electrical Engineering GpA 3.02 scale 4.00

Institute Technology offshore : Electrical & Instrument Inspector

UNIVERSITY of SRIWIJYA Community : Electrical Engineering Organization

UL HAZAD : Hazardous Location And Equipment Protection

Institute Technology offshore : Welding Inspector

CSWIP 3.1TWI : CSWIP 3.1

KKNIAWS 1 : Welding Inspector Competition

Electrical train by Telkom.Tbk

Professional train DEPSOS : Electronic & Electrical

Pro safe RS Electric level 1 : Power Electrical Hazardous rate/level 1

Pro safe RS Electric Level 2 : Power Electrical Hazardous rate/level 2

H2S Hazed Electric Level 2 By OPITO

Welder Performance by RINA

Code of Business Conduct & Ethic

INSPECTION AS

E&I Inspector/ EEHA Inspector

HAZOD E&I, EEIHA

UL HAZAD Hazardous Location And Equipment Protection Updated :11/04/20168 / 11 CV JAKA MARTIN

AWS 1/ CSWIP 3.0 3.1/TWA 1/GEA 1/RINA/STA

Coating Chemical

CORQA 10 100508 Quality System Policy: Corrective and Preventive Action FOR STANDARIZATION / MANAGEMENT

ISO 2008 : 9001,9002,9004,14001

ISO TQM 17260,

INTENAL ISO 19011AUDIT

Coordinator5 S

Coordinator fire drill

CONTACT INFORMATION

Name : Jaka Martin

Education : B.Eng majoring Electrical Engineering

Place date of birth : Palembang 11th 01 1980

Nationality : Indonesia

Passport No : A7686133

Contact Person : +628**-******* or +628**********

Email : acudoe@r.postjobfree.com

Availability : Immediately

I declare that this curriculum vitae written based on the true. And I will be fully responsible for any false information given.

Sincerely Yours,

Jaka Martin

low Certificate Please see



Contact this candidate