Mechanical Engineer Safety

EDWIN A. SEGAYA

Email address: ********@*****.***

Mobile number: 091******** (Globe), 092******** (Smart)

Home Address: Earl Road, Block 10, Lot 38 & 40, Buena Park

Subd., Brgy. Villamonte, Bacolod City,

Negros Occidental

PROFILE

A dynamic, hardworking, efficient and results-oriented team member who rose from the ranks in a manufacturing company and earned sufficient experience in numerous fields, such as, but not limited to, manufacturing operations, boilers operation, preventive repair and maintenance management, environmental, safety, health programs and practices management.

KEY ACHIEVEMENTS

1.Administered the implementation and evaluation of safety programs, procedures and guidelines on construction activities that ensured zero accidents in the construction site.

2.Conducted safety inspection and safety audits of manufacturing and construction facilities to identify safety hazards in their area of concern and recommended appropriate measures.

3.Managed the whole operation of Pollution Control and Safety Department of a sugar manufacturing company and administered the proper installation and operation of pollution control facilities of the company to ensure compliance with air and water quality standards.

4.Reviewed plans and specifications on new construction and maintenance works for environmental and safety compliance.

5.Controlled Wastewater Treatment Plant and maintained the parameter of effluent to ensure compliance with government standards.

6.Ensured compliance of company with requirements prescribed by the DENR, DOLE-BWC, Bureau of Fire Protection (BFP) and other concerned Government agencies.

7.Established good rapport with representatives and officials of concerned Government agencies and local government in dealings pertaining to environmental, safety and health management concerns.

8.Conducted Environmental, Safety and Health seminars and trainings

9.Implemented hot works procedures and evaluated all gas-cutting and wielding activities.

10.Led in the maintenance of fire protection system of company by ensuring that all fire fighting equipment and fire alarm system installed are in good working condition.

11.Maintained a Disaster Contingency Plan to handle disaster situations such as floods, fires and typhoons.

12.Carried out preventive, repair and maintenance program for company’s facilities and process equipment.

WORK EXPERIENCES

SENIOR SAFETY OFFICER, Pollution Control Officer

PÖYRY Contracting Inc. (project based) - June 15, 2015 – February 5, 2016

RESOURCE SPEAKER / TRAINOR ON ENVIRONMENTAL, SAFETY AND HEALTH -BASED TRAININGS

At SONO-Sponsored Seminars/Conventions - July 2014 – May 2015

Technical and Sales Manager

Energy and Aviation Services Corporation – - April 1, 2014 – June 31, 2014

VICTORIAS MILLING COMPANY, INC. (VMC) December 1985 – March 31, 2014

Position

Year

Pollution Control and Safety Department Managing Head

(Pollution Control Officer and Safety Officer)

Jan. 1, 2014 – March 31, 2014

Consultant – Pollution Control and Safety Department.

(Pollution Control Officer and Safety Officer)

March 8, 2010 – Dec. 31, 2013

Consultant – Pollution Control and Safety Department.

(Pollution Control Officer)

Sept. 1, 2007 to March 7, 2010

Pollution Control Dept. Head-Manager (PCO)

Jan. 1, 2004 to Aug. 31, 2007

Pollution Control Dept. Head- Assistant Manager (PCO)

July 1, 2003 to Dec. 31, 2003

Assistant Pollution Control Officer

Feb. 14, 2002 to June 30, 2003

Acting Pollution Control Officer

June 1, 1998 – Feb. 13, 2002

Boiler Supervisor

March 1 – May 31, 1998

Refinery Shift Supervisor

Sept. 16, 1990 to Feb. 28, 1998

Refinery Packaging Supervisor

March 16, 1990 to Sept. 15, 1990

Refinery Filtration Supervisor

Feb. 1, 1988 to March 15, 1990

Cadet Engineer

Dec. 1, 1985 to Jan. 31, 1988

KEY SKILLS AND COMPETENCIES

Knowledge and strong exposure in Safety, and Environmental Management System implementation and maintenance.

Have a general knowledge in protecting the environment, pollution control regulations, waste minimization and conservation of natural resources

Have a working knowledge/skill on occupational safety, fire protection, prevention and control, work hazard evaluation and industrial hygiene.

Knowledge in accident investigations and preparation of recommendations to prevent recurrence

Trainer/lecturer regarding ES&H

Can interpret Mechanical diagrams and drawings

Strong leadership and management skills

With strong oral and written communication skills

Knowledge in Activity Based Costing/Budgeting

Experienced in setting targets and monitoring performance.

Skilled in staff supervision including professionals, cost control, consistently prioritized tasks and meet deadlines.

Knowledgeable of sugar manufacturing general factory operations

Knowledge on safety construction

Ability to lead and direct preventive repair and maintenance of factory and laboratory equipment

Knowledge in ISO 9001:2000 (Quality Management System) documentation.

Knowledge in cGMP

Knowledge in Internal Quality Auditing for ISO

Proficient in Microsoft Applications such as Excel, Power point, Word

EDUCATION AND TRAINING

Mechanical Engineer, August 10, 1984 – PRC No. 0028839

Bachelor of Science in Mechanical Engineering, 1983

Technological Institute of the Philippines

Manila, Philippines

ACCREDITATION:

DENR – EMB Accredited Pollution Control Officer – COA No. COA-00-064*-****-***

ORGANIZATION AFFILIATED:

Member, Philippine Society of Mechanical Engineer – PSME Negros Occidental Chapter

Member, Philippine Society of Mechanical Engineer – PSME Victorias Unit ( Unit Chairman -2012 and was awarded Outstanding Unit Chairman 2012 by the PSME Negros Occidental Chapter)

Member (1995 to Present) - Pollution Control Association of the Philippines, Inc. (PCAPI) Region VI

Board of Director (2010 to 2013), Pollution Control Association of the Philippines, Inc. (PCAPI) Region VI

Vice President for Negros (2013-2014), Pollution Control Association of the Philippines, Inc. (PCAPI) Region VI

Board of Director (August 2014 to Present), Pollution Control Association of the Philippines, Inc. (PCAPI) Region VI

Board of Director (2010 to 2015), Safety Officers of Negros Occidental (SONO)

Trainor, Member, Safety Officers of Negros Occidental (SONO)

Member, Brotherhood of Catholic Businessmen and Professionals (BCBP)

SEMINARS AND CONVENTIONS ATTENDED:

A. IN-HOUSE

1.Basic Supervisory Leadership Program – May 2, 2002

2.Good Corporate Governance

3.Environmental Management System

4.Non-Supervisory Training Program

5.Employees’ Development Training Program

6.7 Habits of Highly Effective People

7.Management Development Program

8.Advance Work Attitude and Values Education

9.Supervisory Training Program

10.Re-orientation Course on cGMP

B.OFF-SITE

1.Approaches towards Cost Effective Waste Water Management – April 10 & 11, 2000

2.18th Regional Annual Convention and Training Seminar of PCOs – May 25, 26 & 27, 2000

3.47th National Annual Philsutech Convention: Providing Relevant Technology for a Proactive Sugar Industry – August 16, 17 & 18, 2000

4.IISE – Introduction to ISO 14000 – November 8, 2000

5.IISE - EMS Implementation Program Workshop – November 20, 21 & 22, 2000

6.IISE – EMS Documentation – February 5 & 6, 2001

7.IISE – EMS Internal Audit – April 25, 26 & 27, 2001

8.IISE – Pre-Certification Preparation – June 25, 2001

9.Environmental Technology Assessment – November 28 & 29, 2001

10.Phil. Environmental Partnership Program (PEPP) Environmental Management Plan Seminar – January 20, 21 & 22, 2004

11.Technological Development in Sugar Processing – February 28, 2005

12.Multi-Partite Monitoring Team (MMT) Seminar/Workshop – July 14-15, 2005

13.Training Workshop on Stack Sampling Analysis II – March 26, 2006

14.Training Workshop on Stack Sampling Analysis III – April 27, 2006

15.Regional Capacity Building Workshop on Clean Development Mechanism (CDM) – September 11 & 12, 2006

16.Clean Development Mechanism – March 1 & 2, 2007

17.Orientation - Seminar on Environmental Laws – May 3 & 4, 2007

18.Enhancing the Performance Environmental Monitoring and Audit Role of MMT – May 22, 2007

19.Basic Occupational Safety and Health Seminar – Nov. 17-21, 2008

20.Revised Procedural Manual for DAO No. 30 series of 2003, the IRR of PD 1586, establishing The Phil. Environmental Impact Statement System – December 11 & 12, 2007

21.55th National Annual Philsutech Convention: Aim High for Global Competitiveness by 2010 – August 13-15, 2008, Cebu City

22.56th National Annual Philsutech Convention – August 11-14, 2009, Cebu City

23.58th National Annual Philsutech Convention – August 15-19, 2011, Cebu City

24.Basic Occupational Safety and Health Seminar – April 26-30, 2010

25.PSME Technical Seminar on The New Fire code of the Philippines – June 25, 2010

26.Training Course for Continued Education on Sustainable Development Program for PCO – September 23, 2010

27.Basic Training Course for PCO Accreditation and PCO Continuing Education – February 18, 2011

28.31st PCAPI Annual National Convention – April 13, 14 & 15, 2011

29.6th SONO Safety Summit: Environmental Safety and Health – September 29 & 30, 2011

30.SONO: Alcohol and Drugs in the Workplace – December 8, 2011

31.PCAPI 32nd Annual National Convention – April 18, 19 & 20, 2012

32.PSME technical Seminar: Rotary Lobe Pump for Light to High Viscous Liquid in the Sugar Industry – May 31, 2012

33.PSME 42nd Chapter Anniversary and General Membership Assembly Seminar:

Oil Maintenance, Castables and Refractories – September 16, 2012

34.SONO 7th Safety Summit: Safety and Healthy Work Environment a Key to Higher and Sustainable Productivity – October 24 & 25, 2012

35.Seminar – Orientation on Environmental Laws – March 25 & 26, 2013

36.PCAPI 33rd Regional Annual Convention and General Membership Assembly – June 27 & 28, 2013

37.SONO 8th Safety Summit: Safe and Healthy Workplaces are Productive– October 24 & 25, 2013

38.Medication Safety – December 10, 2014

39.Resource Speaker (BOSH Training) – February 23, 2015

40.DOLE Training Of Trainers – April 27 – 29, 2015

41.Water Search and Rescue, Mountain Search and Rescue Training – February 15-24, 2016

C.IN-PLANT

1.Internal Quality Audit – April 20, 21 & 22, 1999

2.Sugar Recovery with Membrane Filter Press and Economic Handling of High Viscous Media Using Pump – March 5, 1999

3.Statistical Process Control – March 23, 24 & 25, 1999

4.Compressed Air Purification and Hydraulic Filtration Seminar – September 28, 1999

5.Leaders of the Future Workshop – February 24, 25 & 26, 2000

6.Activity Based Costing/Budgeting Seminar – June 26, 2002

7.Basic Boiler & Cooling Water Treatment Seminar – August 13, 2003

8.Introduction to ISO 9001:2008 Requirements – June 22, 2009

9.NOPPO – Bomb Threat Awareness Seminar – December 11, 2009

Contact this candidate