HHenry Sánchez Process Engineering

Nationality: Venezuelan Experience: 13 years

Birthday Date: 01/18/79 SSN: XXX-77-6188

Marital Status: Married TWIC: 57169414

Skype: alxsanch (HENRY SANCHEZ – VENEZUELA)

Address: 13 West Street, Judibana, Venezuela / 4838 Blue Spruce Hill. 77346. St. Humble. Texas. Mobile: (011) 58-426******* / 281-***-**** /956-***-**** Idioms: Spanish (native) / English (Adv.) Chemical Engineer with 13 years of experience in the petroleum refining processes. Solid knowledge in the area of process engineering, experience in quality and oil movement, crude distillation units, gas natural reforming units, sour water stripped units, industrial services etc. Talent for designing systems that promote maximum efficiency, with knowledge in Root Cause Analysis. Experience in the design of equipment and process simulation for refining processes. Strong communication skills, teamwork, problem solving. Strong knowledge of modules on SAP PM and PM systems; expertise in planning and scheduling of preventive maintenance. Highly motivated person with problem solving skills with a capacity for analysis and presentation. Experience working in multifunctional environments. Assistance in failure analysis of critical equipment and bad actors. AREAS OF EXPERTISE

• Process Simulation Software to evaluate and design process (INPLANT, FLUID FLOW, HEXTRAN, HTRI, PRO

II, Flare, Pipephase, HCAM, PIPESIM, Spread Sheets, ASPEN Plus, Uniformance).

• Process Unit Technologies - Crude/Vacuum Distillation, Hydrotreating, Hydrocraker, Natural Gas Reforming, Catalytic Craking,, Alkylation, Sulfur Complex, Naphtha Reforming, Aromatics Extraction, Merox, Flexicoker, Delayed Coking, etc.

• Process Calculation, Equipment Sizing (Pipes, Heat Exchanger, Tanks, Furnace, Distillation Towers, Pumps, etc), Equipment List, Heat and mass balance, Heat Transfer, Line List, Flare design, Safety valve datasheet, Two phases flow, material selection,

• Utillities Systems (air, nitrogen, steam, natural gas, combustion gas).

• SAP System (Maintenance Programs, Routine

Maintenance).

• Managing Process turnarround/Methodology MG3P.

• Conceptual, Basic and Detail Design. • Process Improvement Engineering.

• Commisioning. • International Oil Trading.

• Revamp • Demurrage Analyst - Reception and clearance ships.

• Design Operational procedures. • Improvement Engineering

• Process Management. • Dock Logistics

• PSSR, Pre Startup Safety Review. • Product Quality & Oil Movements.

• Management of Change. • Analyst economies refining.

• Reading and design P&ID and PFD. • Management through total quality.

• Field Engineering. • Oil Movements Operations and Gasoline and Diesel Blending.

• Statistic tools for process control. • Emergency Prevention and Control

• Safety and Operational Reviews. • Heat Treatment process.

• Codes (Shell, Exxon, API, DEP, ASME, GSPA, NFPA,). • Advanced Industrial Pneumatics.

• Safety (Exposure to Hydrogen Sulfide, Safety in confined spaces, Behavior Based Safety, Work Permit, etc).

• Non destructive essays (Penetrating Dyes, Magnetic Particles, Metallography).

• Programming teams PLC. • Separation of gases from the air (Nitrogen, Argon).

• Troubleshooting Techniques and Method of preventing failures in real time. (HAZOP, What If, Root Cause Analysis).

• Water Treatments Technology (Aerobic Treatment,

Desmineralized Process, WasteWater Treatment).

EDUCATION

• French Institute of Petroleum (I.F.P.)

Graduation Year: 12/2008 Title: Master Degree - Refining Technology – Process Engineer

• Universidad Nacional Experimental “Francisco de Miranda”. Punto Fijo. Edo. Falcón. Graduation Year: 06/2007 Title: Master Degree - Process Simulation Engineer.

• Universidad Nacional Experimental “Francisco de Miranda”. Punto Fijo. Edo. Falcón. Graduation Year: 07/2002 Title: Bachelor Degree - Chemical Engineer HENRY SÁNCHEZ SENIOR PROCESS ENGINEER

CAREER HISTORY

PDVSA Petroleos de Venezuela S.A. Manager of Operations in Oil Movement Department. Amuay, Venezuela. July 2014 – August 2014; March 2016 – Present

Manage 93 operators and 28 supervisors and capital budgets of the plant. Define and drive the financial management of the organization, in terms of opportunities to meet the objectives at a reasonable cost, through planning, monitoring and control of operational and maintenance budget. Establish guidelines to major maintenance programs and preventive, through coordination with staff Major repairs, Routine Maintenance, Facilities Engineering and operations Superintendents. Ensure training of human. Provide initiatives, consistent with the future viability of the business, implementing management assessment techniques, problem solving and generation of changes in systems and processes. CITGO Petroleum. Process and Operations Engineer. Louisiana, United States. October 2014 – March 2015 Develop opportunities list about docks utilization factor. Training in Economic Overview, Process Unit Technologies - Crude/Vacuum Distillation, Delayed Coking, Hydrotreating, Sulfur Complex, Naphtha Reforming, Aromatics Extraction, Merox, Alkylation, Hydrocraker, Terminal Operations, Troubleshooting Techniques, Light Ends and Petrochemicals, Crude Logistics and Feedstocks, Gasoline and Distillate Blending, Demurrage Analysts Overview, General Dock Logistics, Tank Measurement and Marine Inspection, Maintenance Programs, Work Permit - Safety, PSM, Impact System, RCA Events, API 754, Operator Daily Routes. PDVSA Petroleos de Venezuela S.A. Superintendent of Operation in Oil Movement Department. Amuay, Venezuela. May 2010 – October 2014 - Present

Manage, monitor and implement improvements in the day to day operations of the units concerning the movement and storage of products such as gasoline, diesel, kerosene, virgin naphtha and catalytic naphtha, LPG, fuel oil, crude, vacuum gas oil, caustic and asphalt. Manage 93 operators. Supervising and managing capital expenditure budgets of the plant. Analyze and recommend actions to reduce accidents with equipment, people and fires throughout the operational area. Ensure alignment of interdependent activities with other divisions and departments of the organization. Contribute to the project life cycle assessment (pre -feasibility, feasibility). Minimizing risk through early identification of faults, select the best operating plan focused on preventing problems. Ensure availability of equipment. Reduce downtime of equipment. Responsible for safety and cleanliness of the operational area. Participation in design of conceptual, basic and detail engineering projects. PDVSA Petroleos de Venezuela S.A. Senior Process Engineer Oil Movement, Utilities and Distillations Units. Amuay, Venezuela. February 2005 – May 2010 (5 years 3 months)

Technical support for operations oil movements department. Monitoring day to day troubleshooting and optimization, reading isometrics, P&ID update and conditions for relief and safety systems. Field Engineering for the shutdown, construction, inspection and commissioning of refinery plant. Using Process Simulation (INPLANT, FLUID FLOW, HEXTRAN, HTRI, PRO II, Flare) for design and evaluate equipments. Availability to provide technical support 24 hours. Analyze equipment failures to determine the causes and recommendations. Collaborate on projects changes in the process of improving equipment reliability. I have used the “HAZOP and What If” procedure. UNIVERSIDAD NACIONAL EXPERIMENTAL FUERZAS ARMADAS. Professor of Chemical Reaction Engineering. Punto Fijo, Venezuela. September 2010 – February 2012 (1 years 5 months)

Explain in terms of kinetic, homogeneous and complex reactions, ideal reactors, continuous and batch, effects of temperature and pressure in the reactions, not ideal reactors.

UNIVERSIDAD NACIONAL EXPERIMENTAL FRANCISCO DE MIRANDA. Professor of Dynamics and Control Process. Punto Fijo, Venezuela. February 2004 – December 2009 (4 years 10 months)

Explain terms Feedback, feed-forward, PID Control, Nonlinear Control, Distributed control system, robust control of processes. PDVSA Petroleos de Venezuela S.A. Process Engineer in Sour Water Stripped Unit. Venezuela. November 2001 – May 2002 (6 months) Development of Basic Engineering of New Sour Water Stripper Unit (DAA-5) in CRP-Cardon. HYDROGEN COMPANY PARAGUANA. Process Engineer in Natural Gas Reforming Unit. Amuay, Venezuela. June 2001 – August 2001 (2 months)

Evaluation of Treatment program for the steam generation system of the Hydrogen Company Paraguana. HYDROGEN COMPANY PARAGUANA. Process Engineer in Natural Gas Reforming Unit. Amuay, Venezuela. March 2001 – May 2001 (2 months)

Determining the useful life of the catalyst in the catalytic reforming unit and catalytic conversion unit of the Hydrogen Company Paraguana.

Contact this candidate