Data Engineering
Resume:
Ruben Henderson, III
Detroit, Michigan 48202
acuat5@r.postjobfree.com
OBJECTIVE
Seeking a position with advancement and growth opportunities.
WORK EXPERIENCE
08/2015 – 03/2016 Quality Inspector Ajilon Contract / DCI
Duties & Responsibilities: Updated documents in the Visual Archive Database; completed and responded to customer surveys (after training); reviewed and prioritized jobs to be inspected based on due dates and specific Production Control demands; reviewed paperwork for each job to determine inspection method (thickness, size, etc.) based on specification requirements; inspected each order and documented the results; whenever a non-conforming order was found, implemented corrective action and reworked paperwork; moved accepted orders to shipping; when defective parts were received prior to processing, documented and notified the customer managed Outlook calendar schedules for the department; provided plans and scheduled development support; generated and distributed plans and schedule reports; maintained project schedule.
Skills: Micrometer, Caliper, calibrated parts for thickness and materials, excellent time management, filing and inspection skills.
GM
11/2014-7/2015 Specifications Analyst (Contract: Acro)
Duties & Responsibilities Powertrain Transmission/Battery for GFX Program:
PROCESSING PART TYPE WORK ORDER (PROC):
Responsible for updating GPDS per the intent of the PRT and contacted Responsible Engineer with all concerns. Processed PRTs according to specifications and approved for global use;
PORT OF ENTRY RELEASE PROCESS (UPC PREFIX 92):
Responsible for processing the PRT type WO intent as documented by the DE/DRE into the Global Product Description System (GPDS);
RELEASE DOCUMENTATION QUALITY CONTAINMENT:
Responsible for initiating Release Issues found during self-discovery and resolving issues reported by customers of the Master Parts List. If a containment issue or equivalent tracking mechanism (i.e. work order (WO) was initiated to address the issue, the issue was followed until the work order had been processed through specifications. Once an issue was entered into the database as “Closed” and processed through specifications it resulted in following several audits; created a new issue, assigned a Resolution Owner, set settings for email notifications, viewed, edited, and responded to the Issue Definition, Root Cause, or Solution; took corrective action describing a method/process that should be reviewed / performed in order for the issue to not occur in the future.
SPEC CORRECTION –USING SUPPLEMENT WORK ORDER:
Responsible for initiating a Supplement WO and utilizing GPDS to correct the discrepant parts/data. If a correction in the GPDS/MPL was needed, resolved the discrepant part or data by utilizing a specific process.
The Global Product Description System (GPDS), and E Squared (E2) was the Equipment/Logistics, and SharePoint accessed; used and updated in the varied responsibilities.
6/2014 –9/2014 Safety Analytics Technical Analyst GM/
(Contract: Iconma)
Duties & Responsibilities: Work directly with engineers on the Emerging Issues and Product Investigations Teams to review vehicle related records from data sources such TREAD, warranty, OnStar and other data sources; perform TREAD data base searches in response to leadership inquiries, special data requests and other search requests following established processes and procedures; perform data mining and text mining analysis of vehicle data from warranty repair information, customer complaints, OnStar, unstructured verbatim and social media, etc. for support to Product Investigators; analyze key database information across all of GM’s data entities in support of Product Investigations; assist investigators in evaluating relevant records by thoroughly reading verbatims and categorizing according to specific direction from the investigator. Worked with SharePoint and in conjunction used this application for tutorial purposes, downloading materials to allow for access to various applications.
Takata
12/2013 – 4/2014 Technician – Prototype Airbag Inflators (Contract: PSG)
Duties & Responsibilities: Contributed to the reliable evaluation of product design by operating various tests to the prototype parts thermal heating and cooling process and helium leak tests; maintained records, analyzed data and reported test results to airbag inerts and prototype builds; added initiators to inflators and fuel pellets; added stamping numbers to inflator base; facilities testing requirements by devising, sketching and making fixtures, assisting in the design of the test and development of test equipment, setting up and operating test equipment; contributed to maintaining the test lab by performing maintenance, repairing test equipment, making Prototype Airbag Inflators; maintained shop cleanliness in general and assigned areas including the machines; ensured that all appropriate safety measures and practices are followed to prevent injury to self and others according to the company and government regulations and PPAP/ISO and DFMEA standards; organized myself to complete tasks to maintain project schedule; knowledgeable and comply with applicable Technical Standards, and business lab manuals and PLC’s; conducted and set up testing with minimal supervision; executed tests based on the machine and Technician procedures as well as the polly valence rating system; ability to interface with engineers, designers and customers to give answers from root cause analysis on finished parts; converted applications from UNIX to Linux; tested converted apps.
9/2013-11/2013 Press Operator G-TEKT America Corp
(Contract: Manpower)
Responsible for performing production related tasks necessary for the safe, efficient, and accurate operation of the press.
Duties & Responsibilities: Performed typical progressive and transfer press operations; set up die in press making feed and machine adjustments as indicated; assisted with loading steel coil and blanks onto press; performed visual quality inspection on parts; identified and separated components which failed to meet quality standards; communicated with the supervisor and/or team leader to receive instructions and to report quality concerns; observed press to detect malfunctions or non-conforming conditions; communicated equipment related problems correctly; performed minor troubleshooting on press; maintained an accurate count of parts and ensured production figures were met; recorded all downtime; maintained the work area and equipment in a clean, orderly and organized conditions; followed prescribed safety regulations, including Lock Out/Tag Out, assigned Personal Protective Equipment (PPE), etc.
Working in this environment required wearing a company provided uniform and the use of safety equipment to include but not limited to; eye safety glasses, hearing protectors, steel toed boots, and hard hats. Loose fitting jewelry and clothing were not permitted.
10/2012 – 11/2013 Assembly/Press Operator Mobis/Chrysler Manufacturing Detroit, MI
Used press machine for bushing to cradle; loaded screws & bolts onto cradle; loaded LCA onto cradle using the press screw machine; each day a quota of 500 parts had to be meet for Chrysler approval.
02/10/1997- 09/2012 Independent Owner, Bloom and Roses
Transportation Service Southfield, MI
Transporting customers to airport and to other destinations such as hotels or motels, auto shows, proms, or other special events in safe and comfortable fashion.
3/31/2008 – 8/2013 Independent Owner, Coverall Health-Based
Janitorial Franchise Cleaning System
Northville, MI
Independent business owner of a janitorial franchise. Acquired and performed janitorial contracts for commercial and health care facilities. Handled marketing and advertising opportunities. As an HR Coordinator I hired, trained and supervised staff; developed and fostered customer relationships, ensured customer satisfaction, and addressed any issue or concerns, maintained proper tax records and business licenses.
8/2003 – 2/2008 Specifications Bartech
Troy, MI
Released parts in E-Squared and tracked them in PDS for the Service and Saturn programs. This required initiating engineering work orders, analyze interpret specification data, audit parts release for production, work with releasing engineers to develop an accurate parts list, trained engineers in E-Squared, track engineering work orders, read and set up meetings with the engineers to ensure accuracy of their parts; check drawings in the Lotus and PDS systems; maintained record keeping activities. I contributed as a team player in a team environment; worked independently of supervisor. Also, worked with SQL,
SAP, PPAP, CCA Data Base and EMS.
10/2001 – 7/2003 Specification Coordinator ASC/GM
Oak Park, MI
Coordinator for GM and ASC in controlling the parts assembled at Lansing Craft or at the GM site. The system at ASC was IMAN database and the system at GM was the GPDS database for the SSR Program. I was responsible for all the parts which are the Body Structure of the Vehicle, Electrical, Chassis, Interior, Topstack and the Exterior area. I supported 12 engineers at ASC with hard work and team work to make sure we covered all aspects in making the program run smooth for the ISO and DFMEA analysis, also understood procedure analysis PLC’s, EMS, PDF Files. These parts also hold options of the vehicle which are what they are made up to be the assembly and sub-assemblies parts that are put together to form an option for the vehicle . For GM, I maintained the E-Squared System, the release of a EWO and Temp EWO’s for the ASC Program. Additionally at GM, I maintained the Parts Resolution Tracking System.
3/2001 – 7/2001 Engineering Work Orders GM
(Contract: Bartech)
Responsible for processing all EWO’s for the Z, J, 315/318 Delta vehicle lines. Duties required sending EWO’s common quote forms to suppliers for costs and timing, adding responsible buyers on to the EWO’s, receiving the quotes from the suppliers and signing off on the EWO’s after the buyer agreed to the piece and cost changes and tooling investments. Follow up with suppliers for feedback on overdue quote responses and work with buyers to help this new gatekeeper process become more effective and run more efficient.
2/1999 – 1/2001 Specification Analyst GM
(Contract: Aerotek)
Release parts in PDS, initiate engineering work orders, analyze and interpret specification data, audit part releases for production, worked with releasing engineers to develop an accurate part list, train engineers in EWO+, track engineering work orders, read and check blueprints for correctness, and record keeping activities.
10/1998 – 2/1999 Hardware Analyst GM
(Contract: Aerotek)
Identified and reported roadblocks, performed audits to assure job completion, initiated EWO’s correctly into PDS system, provided Design Department with a corrected parts list, worked with pre-production engineers and experimental material engineers to ensure EWO’s applied to pre-production builds, released prints in PDS, and knowledgeable with UNIX system.
2/1995 – 2/1998 Document Controller-QS-9000 Solvay Automotive
Troy, MI
Maintain all master prints in the print database, copy prints for plants and sent them master sets, make controlled and other copies of prints per request, maintain a controlled copy list of copied prints, help with specification, maintain and distribution for this location and the plants, help with maintaining master documents for all QS-9000 categories, policies, procedures, work instructions, forms and quality documents at the location, help with assigning numbers to documents and storing them on the Q-drive and in the Harrington Group Software, and distribute microfilming documents and their revision when they occur, experienced with PowerPoint and microfiche. I walked through the plant for QS-9000 auditing. Performed manufacturing for plastic molding gas tanks.
EDUCATION
Macomb College
Associate Degree
Engineering Degree (still attending)
Davenport College
Grand Rapids
Business Degree
1991-1993
SKILLS
Tech Analyst Expert
Microsoft Excel, PowerPoint, Visio,
PDS, & AS400 Expert
Microsoft Word, Catia, Lotus Notes,
UG, Chess Intermediate
Micrometers, Calipers and Gauges Intermediate
C/C++ language Intermediate
Java Development Intermediate
E2’d, GPDS, SharePoint Expert
PDF Files, CCA Data Base, EMS Expert
PROFESSIONAL REFERENCES
Tiffany Drake Phyllis Moore
Recruiter/Ajilon DCI Takata Supervisor
Drenna Nelson Jerry Baugh
GM/Acro GM Supervisor
acuat5@r.postjobfree.com
Wilma Kelly Rich Williams
Spec. Supervisor/GM, Warren, MI Supervisor
GM/Iconma 248-***-****
acuat5@r.postjobfree.com
Contact this candidate