Project Engineer
Resume:
ADAM M. HUBLER
Cornelius, NC
****.******@*****.***
OBJECTIVE
Seeking a position where I can make a meaningful contribution with an opportunity to learn and advance while utilizing and expanding my education and training. To safely produce a quality product in a timely manner.
Accomplishments
●Estimated and prepared preplanning activities for discrete projects as part of a multimillion dollar program.
●Field Engineer for 10MM electrical airport upgrade project on North slope.
●Over 15 years experience in the electrical and technology industry. Experience in large corporate, health care, oilfield, military and field work venues.
●Work projects from inception to completion in capacities of increasing responsibility.
●Maintained network and provide desktop support for over 500 people at Pfizer Pharmaceuticals.
●Implemented a ground up mobile video conference infrastructure for Pfizer pharmaceutical.
●Upgrade entire cell site equipment and infrastructure to 3G TDMA network for AT&T in two major cities (Fresno, CA and San Diego, CA)
●Performed data mining and system integration for corporate expansion.
Positional Summary
Pre Planning – Responsible for developing estimate for project, attend design meetings, develop cost/work breakdowns, identify schedulable tasks, baseline manpower projections, create cost estimate summary, develop execution plan, develop field installation work packages, develop productivity analysis tools, write inclusions/exclusions letter, prepare all deliverables required for project to include but not limited to: Mobilization plan, site layout plan, project schedule organizational chart, equipment plan, HSE plan, project controls plan, quality control plan, waste management plan, demobilization plan, traffic coordination plan and work execution plan.
Project Controls – Responsible for management and submittal of modifications and
clarifications within the project. Responsible for addressing schedule, fiscal, constructability, specification and code issues utilizing the RFI-PCR process.
Estimating – Integral portion of the preplanning activity, I would develop an estimate to the widget level, to include breakdowns by discipline, location, drawing, activity, activity elements, construction phase, and schedulable tasks. Estimates were used as foundation in preplanning activities pertaining to execution, schedule and cost breakdown.
Field Engineer – In addition to duties performed for project controls also responsible for material issues, verification of OS&D, turnover project separated out by system and sub-system, develop redlines and provide constructability advice.
Electrician – Interpret and follow prints to construction. Read and review scope of work. Formulate a plan for that scope of work. Installation of transformers, load banks, MCC, Programmable Logic controllers (PLC’s), Instrument Transfer Boxes (ITB), Control Transfer Boxes (CTB), Power distribution panels, Relay Panels, Heat Trace, lighting systems, grounding and bonding systems, control station, HVAC system controls, marshalling panels, Fire and Gas systems, generators, heaters, battery chargers, battery systems, alarm systems, motors, trenching, conduit, cable tray and raceway systems. Work in both hazardous and non classified locations. Certified in fall arrest, confined space entry, and other safety awareness training. Operate equipment such as manlift, boom truck, forklift, zoom boom, and skid steer.
Instrument tech – Interpret and follow prints, data sheets and P&ID’s. Installation of flow, level, pressure, differential pressure and temperature elements and transmitters. Tubing and installation of Fire and Gas systems, HALON distribution, Gas detectors, smoke detectors, ionization detectors and warning lights. Tubing for various valves, actuators and solenoids, along with associated instrument air. Installation of tube trace, injection quills, pressure relief valves, chemical and pressure boost vessel. Pressure testing tubing utilizing nitrogen or oil mediums.
Computer - Installation and configuration of routers, switches, repeaters, microwave connections, gateways, gatekeepers, win 2000 servers. Well versed in most every software available. Maintenance and configuration of virtual private networks, web servers, file servers, RAID’s, videoconference systems, printers, handheld devices. Experience in data recovery and extraction, including corrupt hard drives, email, data mining and system restoration. Work with various physical topologies such as token ring, star, line and bus. Work with TCP/IP DHCP and static, Banyan Vines, Active Directory, Telnet/Hyperterminal.
Proficiencies
SOFTWARE
Operating System - Windows 3.x, 9x, NT, ME, 2000, XP, Vista, Macintosh, DOS, Basic UNIX Operating, Server 2003
Network - Telnet/HyperTerminal, SmarTerm TCP/IP, SMS, Banyan Vines, DHCP, VPN, Active Directory
Cost Reporting - JDE, AS/3670, Peachtree, Quicken
Office - Word, Excel, Access, Power Point, Project, Front Page, Visio, Outlook, Quark, Acrobat, Skype, Logmein
Utilities - Norton Ghost, Disk Image, Norton Utilities, McAfee Antivirus, Nero, FTP, Ontrack,
Graphic - Photoshop, Flash, Dream weaver, Fireworks, Pinnacle,
Drafting – AutoCAD, Solidworks, Lightwave, Visio
Estimating/Scheduling - Winest, Primavera (P6), MS Project
Service Management - Service Center, Heat, Access database, SharePoint
HARDWARE
Network - Routers, Switches, Hubs, PLC’s, Microwave Satellite, DSX, CSU, NIU
Cabling - 10Base2 Coaxial, Fiber Optic, CAT 3/5/5E/6, TURK, MCHL, TMCX, Gas blocking,
Storage - RAID's, Tape backup, CD, DVD, Zip, SCSI
Testing - Fluke, T-berd, SunSet, Oscilloscope, Multimeter, Megger
Communication - VTC, AV equipment, Fax, Telephone
Office – Blackberry, Palm, IPAQ, Printers, Scanner, POS, labeler, Barcode scanner
Education
University Of Oregon - Eugene, OR (2 Yr.)
Mount Hood Community College - Gresham, OR (1 Yr.)
Personal Administration School - Camp Lejeune, NC (392 Hr.)
Fresno City College - Fresno, CA (A.A.)
Certificates and Honors
Electrical Journeyman AK20070307
Medal of Good Conduct
MSHA
Award of Superior Performance (4)
NSTC
Academic Excellence (6)
TWIC
Safety recognition (4)
Wings Steering Team recognition coin
Personal
I am a dedicated, hard working individual with a strong work ethic. I have the ability to work as a team player or alone without supervision. My dedication and attention to detail ensures that I complete the project on time with a “Can Do” attitude. I am honest and trustworthy with strong customer support skills. I am very resourceful and willing to do what it takes for success of the company within ethical guidelines. Very good at accepting criticism and applying it to adapt to everyday practices.
References and work history are available upon request
WORK HISTORY HIGHLIGHTS
Electrician
ASRC 2014 – Present
Experience in maintenance and new construction of facilities at Alpine, AK.
●Fabrication and installation of wells and well shelters.
●Maintenance and troubleshooting of generators, turbines, UPS systems.
●Construction and maintenance of tank farms.
●Troubleshooting of heating, lighting, power and heat trace issues.
Electrical Planner/Estimator
Udelhoven 2010 – 2014
Experience working with projects from inception to completion. Work with all levels of the project from the hands to project management.
●Experience as Field Engineer for runway upgrade project providing resolution to constructability, schedule, fiscal and material impacts.
●Sole electrical estimator for the greater Kuparuk area projects. Working primarily with oilfield installations and upgrades.
●Responsible for preplanning activities - Estimate, review drawing package, attend design meetings, build work packages, schedule activities, baseline manpower projection, tools / equipment requirements, material review.
●Generate deliverable documentation - Execution plans, Organizational chart, Construction Safety Auditing Plan (CSAP), Equipment inspection mobilization plan, Facility plot plan, QC/safety coverage plans, risk mitigation plan, change management plan, procedures for special processes, etc.
●Management of project changes RFI process. Provide information as to impacts with the project tract and determine trends. Maintain records for lessons learned.
●Management of project fiscal changes and charge codes PCR process. Provide required documentation for budget modifications.
●Management of materials Material Take Off (MTO), MR analysis, Bill of Material (BOM). Determine material shortages, tracking of material, assess impact to project completion.
●Develop schedule activities, durations and manpower assignment. Provide linking to include predecessors and milestones.
●Resolve technical questions to minimize job impact.
●Management of correspondence between technical authority, construction supervisors and construction lead
Instrument Fitter / Electrical Journeyman
Udelhoven 2008-2010
Successful completion of Alpine CD2 expansion, Alpine Water Handling Upgrade, Kuparuk 1J-PPP, several ENI Module fabrications at the Fab Shop, and several Well Line Upgrades at Kuparuk.
●Foreman for pipeline pigging module installation
●Installed SSV and SSSV hydraulic lines to well houses.
●Replaced chemical injection lines for corrosion inhibitor, scale inhibitor and emulsion breaker.
●Fabrication of modules from skeleton to complete shippable unit.
●Installation of HVAC controls.
●Work alongside structural and mechanical crews to gain understanding of processes involved to maximize productivity.
●Installation of Pressure, Flow, and Temperature transmitters and elements.
●Installation and modification of Halon and Fine Water Mist Systems.
●Pressure test instrumentation tubing.
Electrician
International Electric/Alaska Gold 2007-2008
●Experience in the mining industry.
●Major emphasis on MCC for thickener.
●Installation of lighting and power receptacles.
●Termination of motors, pumps and instrumentation.
●Bending conduit, installing cable tray and flex connectors.
Electrician
VECO/CH2MHill/Pioneer 2007
●Experience in the industrial environment at the North Slope.
●Pulling and terminating of TURK control cables.
●Installation of cable tray and tube trace.
●Installation and verification of heat trace systems.
●Fabrication and installation of support systems.
●Termination of ITB’s and CTB’s
●Termination of motors in well-bays.
Electrician
Big G Electric/Tesoro 2007
●Experience in the industrial environment working on a Ultra Low Sulfur Diesel (ULSD) refinery project.
●Major focus on control center installing marshalling panel, interconnect cabling with PLC’s.
●Installation and wiring of external lighting fixtures, and controls for fin fans.
●Measure and bend conduit for lighting.
●Pull and terminate wiring for lighting, relay panels, junction boxes, and heat trace.
Desktop Engineer
COMPUCOM/Pfizer 2004 - 2006
●Extensive experience in a corporate environment, providing desktop support to: executives, scientists and support personnel.
●Support over 500 end users, over 1700 total users.
●Provide support for: servers, laptops, desktops, printers, scanners, fax, labelers, phones, handholds, wireless connectivity, VPN, Outlook/Exchange, network shares, POS, A/V equipment, and lab equipment.
●Troubleshoot network issues, software and hardware conflicts.
●Set up and maintain video conference equipment for local and global meetings and events.
Video Teleconference Technician
Pfizer Pharmaceuticals 2001 - 2004
●Progressive knowledge and experience in working with VTC equipment.
●Installation and maintenance of over 30 mobile VTC units, deployable to users’ office.
●Set up local and world wide meetings between Pfizer colleagues, vendors, candidates, scientists and executives.
●Troubleshoot network issues, software and hardware conflicts.
●Build web based monitoring station for units, to administer during meetings.
●Troubleshoot network topology, gateway, and gatekeeper for errors.
Installer/Tester/Troubleshooter
Nortel Networks/AT&T 2000-2001
●Extensive experience dealing with TDMA equipment while working on the installation and commissioning of the Fresno ATTW market.
●Installation of RF and CE frames, top support, anchoring, alarms (internal and external), T1 connection (DSX, NIU, and CSU), power, input and control cards, radio deployment, dressing and lacing cables.
●Commissioned power, set power levels on radios, configured CSUs, loaded ICRM and radios with support from cut center.
Tested- Troubleshot alarms, span issues, equipment failure, software conflict.
Systems Specialist
VA Medical Center 1999 - 2000
●One years experience providing network and small systems expertise, for the Veterans Administration Medical Center in Fresno, California.
●Bench work - repairs, upgrades, troubleshooting, and experimentation.
●CAT5 proficiency - pulls, terminate, punch down, and certify.
●Troubleshooting - hardware, software, and network.
●Y2K upgrades - hardware, software, and BIOS flash.
●Maintain video teleconferencing software (VTEL).
●Ensure proper functioning of over 1000 users, 400 printers and 700 computers.
●Implement software and hardware upgrades.
Information System Coordinator
USMC 1993 - 1997
●Four years applied experience dealing with networking and computer system programs while working as an administrator in the Marine Corps, Camp Pendleton, CA.
●Ensured proper functioning of Local Area Network (LAN) for over 100 users.
●Issued, removed and maintained user accounts, lists, directories and shared services.
●Installed, customized and instructed on various forms of software.
●Repaired and spliced 10Base2 coaxial cables.
●Utilized cryptographic electronic mail (TACCIMS)
Contact this candidate