Electrical State University
Resume:
DOMINGO G. VISCO
ELECTRICIAN
*** ****** **. ***. ********, Caloocan City
****************@*****.***
Objectives: Seeking employment as an electrician that will build on current skills and
Experience.
Education
Tertiary
School : Don Mariano Marcos Memorial State University
Mid-La Union Campus
San Fernando City, La Union
Course : Bachelor of Science in Industrial Technology
Major in Electricity, 1999-2003
Secondary : Lepanto National High School
Lepanto, Mankayan, Benguet
1995-1999
Elementary : Lepanto Elementary School
Lepanto, Mankayan, Benguet
1987-1993
Trainings
SHIELDED METAL ARC WELDING NC-II
Don Mariano Marcos Memorial State University
Mid-La Union Campus
Catbangen, City of San Fernando La Union
August 7- 16, 2014
WELDING ON-THE-JOB TRAINING
McDowell Brothers Industries
Sudbury, Ontario Canada
P3B4J8
BASIC FIRST AID TRAINING
CPJ training center,LCMC
Lepanto,Mankayan, Benguet
March 27-29, 2008
AUTOMOTIVE SERVICING TESDA NC-II
La Trinidad, Benguet
January, 2008
ELECTRICAL ON-THE-JOB TRAINING
Lepanto Consolidated Mining Company
Lepanto, Mankayan, Benguet
October 17,2002 - Febuary 3, 2003
ELECTRICAL ON-THE-JOB TRAINING
Lepanto Consolidated Mining Company
Lepanto, Mankayan, Benguet
March 23- May11, 2002
BASIC LIFE SUPPORT
Adult Cardio Pulmonary Resuscitation
Don Mariano Marcos Memorial State University
San Fernando City,La Union
October 12-13, 2001
BASIC FIRST AID TRAINING
Don Mariano Marcos Memorial State University
San Fernando City, La Union
October 8-11, 2001
SEMINARS ATTENDED
Technical Seminar on Application and Undestanding
Molded Case Circuit Brekers
Load Centers and Panel Boards
Lepanto Consolidated Mining Company
Lepanto, Mankayan, Benguet
June 3, 2007
Journey to One's Self Seminar Work Shop
LMD Training Center
Lepanto, Mankayan, Benguet
May 16-18, 2007
Appreciation Course on Pnuematic Technology
SMC Pnuematic Training Center
Laguna, Philippines
September 19, 2002
SKILLS, KNOWLEDGE, AND ABILITIES
: knowledge in arc and mig welding
: knowledge in gas cutting
: knowledge in mechanics
: general wiring of automotives
: driving ( holds 1,2 driving restriction)
Employment History:
Company : McDowell Brothers Industries Sudbury, Ontario, Canada
P3b4J8
Position : Electrician/Mechanic/Welder
Period of Employment : March 16, 2011 – January 9, 2016
Department : Mining Department
Status of Employment : Full time
Number of hours per week : 44hours
Immediate Supervisor : Philip Lipscomb
Job Summary:
General wiring and repair of all kinds of mining equipment such as; Jumbo, Scoop-tram, dump truck, cement mixer truck.
Detailed Job Description:
• Read, examine, interpret electrical drawings, schematic diagram, blueprints, and codes
• Make and set pressure of manifold for torque converter, transmission, and park brake
• Stripped off dash board, junction box, manifolds, horn, backup alarm, running lights, head lights, harness, and pressure switches
• Clean/pressure wash the unit
• Look out and make sketch plans for wiring, measure all necessary length of lumes to be used
• Make a list of materials needed and order parts
• Make electrical wiring harness
• Install and fit in gauges, switches, indicators on dash board
• Test and troubleshoot newly build dash board
• Install solenoids, relays, emergency stop switches, pressure switch
• Check and replace transformers
• Install slip-ring, main fuse, battery master switch
• Check and charge battery
• Install steering cylinder
• Install hoist/dump cylinders and run hoses
• Install and run harness of grid heater, and ADM
• Install motor starter, alternator, v-belts, air conditioning compressor and sensor
• Install dc heaters, air conditioning unit, pressurizer, accumulator and transmission temperature switches
• Install lighting fixtures, alarm, signal, inspect overhead crane and jib crane
• Fill out electrical inspection list before unit is being release
• Sand blast, and paint fire wall, dash board, junction box
• Clean and pressure test, intake pipe, exhaust pipe, fuel tank, hydraulic tank
• Troubleshoot motor controls, rebuild motor controls, use proper tools and its specification
• Install thermostat of heaters, lighting ballast, fluorescent fixtures, light switch, and float switch.
Company : Bin Harkil
P. O. Box 24113 Jeddah
21446
Al-Jawharra Industrial
Zone
Saudi Arabia
Position : Industrial Electrician
Period of Employment : July 2010 – December 2011
Department : General Maintenance Services
Status of Employment : Full time
Number of Hours per week : 48 hours
Immediate Supervisor : Bayani Mariano (Maintenance Supervisor)
Job Summary:
Install, setup electrical devices, wiring and components on crushing plant such as soft starter, three phase motor, circuit breakers to name a few. Troubleshoot, check, repair and maintain electrical and mechanical drilling machines and heavy equipment.
Detailed Job Description:
• Examine, construct and knows how to interpret electrical drawings, blueprints, schematic diagrams, electrical code and its specifications to distinguish layouts of industrial electrical apparatus to be establish.
• Inspect, checkout and put right electrical wiring receptacle, rigid steel conduits and plastic, fibre-optic cable for communications and signals, coaxial cable assemblies. Electrical devices designed to hold and connect the lamps to power supply and other electrical items.
• Install soft starter control motors controlled by Modicon Programmable Logic Control (PLC)
• Install altivar controls, dust collector and dust suppression controls
• Install, connect, test and maintain electrical system
• Install and maintain electronic controls for machines in the crusher
• Fasten to the wall small metal or plastic boxes that will house electrical switches and outlets.
• Pull insulated wires/cables through conduit to complete circuit between boxes.
• Joint wires in boxes with various special designed connectors
• Test and checked equipment’s with the use of ohmmeter, voltmeter ensuring electrical compatibility and safety of components
• Replace circuit breakers, fuse, switches, electrical and electronics components and wires
• Troubleshoot and installed electrical systems to locate and correct malfunction
• Install large and small pipe and conduit ire pulling for electrical system
• Conduit electrical installation, removal repair, and maintenance of fire alarm and underground wiring up to 4,160 volts
• Order and maintain inventory and utilize various hard tools
• Install ground leads and connect power cables ti equipment such as motors
• Work from ladders, scaffolds and roof to install, maintain or repair electrical equipment and fixtures
• Construct and fabricate parts using hand tools and specification
• Perform physically demanding task such as digging trenches to lay conduit and moving and lifting heavy objects
• Periodically inspect equipment and locate and correct problems before breakdown occur
• When breakdown occur, do necessary repairs as quickly as possible in order to minimize inconvenience
• Conduit walk around inspection always equipment such as 769 off-highway dump truck, ranger drilling 700 drill rig 300.550 Volvo backhoe, bulldozers, forklift, bobcat and 980H loaders
• Install compressor motor for air conditioning unit
• Check and replace defective senders, gauges, solenoids valves and sensors
• Install horn relays and overload
• Repair wiper motors and wash motors
• Change worn out seal kit and 0-rings of cylinders
• Test and repair starter motor, alternator and battery
• Change thermostat and worn out v-belt
• Check and replace defective float switch of fuel
• Put-in setup rotating machines such as motors, generators and maintain manufacturing storage battery, hydraulic and pneumatic electrical control system
• Manage walk around inspection and visual checkup, obey perform company programs and safe keep maintenance document
• May establish, calibrate and keep it in order industrial gadget and related devices.
Company : Lepanto Consolidated Mining Company
Lepanto, Mankayan, Benguet Philippines
Position : Electrician
Period of Employment : July 2003 – July 2007
Department : Technical Maintenance Services Group
Type of Employment contrac t : Regular
Status of employment : Full time
Numbers of hour per week : 48 hours
Immediate Supervisor : Engr. Neil Paquito (Foreman)
Job Summary:
Troubleshoot Load Haul Dump (LHD) like EJC 60E. EJC 61D, EJC 100d, EJC 130D, MTI BACKHOE, LPT ( Low profile Truck) Wagner, SAT2D, Jumbo on Jobsite. Repair alternator and starter motor. Install shut off solenoids, belt breakage switch horn, battery gauge, hour meter, accumulator gauge; install temperature sender, pressure switch, park brake switch, park brake solenoid, battery master switch and light switches. Replace worn out alternator belt. Install trailing cable of electric cable. Trace up defective motors, tests and repair wiring of lighting systems. Troubleshoot motor control on job site. Conduct general wiring installation of motor controls such as; across the line, reverse/forward, and repair defective locomotive controllers.
Detailed Duties and Responsibilities:
• Examine, understand and interpret drawings, blueprints, schematic diagrams and follow electrical code and its specifications to erect and layout, industrial electrical equipment installations.
• Install and check power unit, control unit of direct current controlled locomotives
• Check, repair and replace brush box holders of direct current locomotives motors
• Install pipe hunger, clumps, insulators, splice bar of trolley line
• Replace worn out contact tips of alternating current locomotive controller.
• Check, test, shorted motor winding of locomotives
• Replace worn out slides shoe
• Check, test, repair or replace moving contact tips and stationary contact tips for reverse and forward direction
• Conduct preventive maintenance service on hoist controls
• Layout and connect cables and wires for lighting fixtures, controls, alarms and man cage signals
• Troubleshoot telephone circuit and wirings
• Install vertical pumps, motor and control
• Troubleshoot motor controls on the job site
• Check, test and replace defective submersible pump
• Assemble, test and install reverse-forward, wye-delta motor controls
• Install and test magnetic contractors, circuit breakers and overload relays for safety and compatibility
• Layout and hookup supply cable for electric motors and electric load haul dump (LHD)
• Troubleshoot (LHD) load haul dump like EJC 60E, 61D, 100D, 130D, MTI, backhoe, LPT, Wagner, ST2D, Jumbo drill single boom
• Troubleshoot hard starting LHD and LPT on the job site
• Check and maintain of battery and equipment.
• Check, test and repair defective motor starter, alternator and battery charger
• Check and replace busted sealed beam and broken housing
• May fabricate alternator adjuster, align and tension alternator v-belt
• Install temperature sender, oil pressure sender fuel gauge, oil pressure gauge, park break solenoids, reverse/forward solenoids and shutoff solenoids
Contact this candidate