*

REFERENCES Available on request

Mrinal Das

[Mechanical Engineer (dip.)]

Mobile: +91-903*******

E-mail: actw5f@r.postjobfree.com

Skype : QCENGINEERMRINALDAS

PERSONAL STATEMENT

A highly resourceful, flexible and enthusiastic individual and an ambitious Mechanical Engineer (Dip.) want to take the challenge of working in a renowned sector. Have a strong potential of delivering high profile and is committed to providing a high quality service delivery to every client and project I work on. I possess the unique ability to maintain an overview of entire projects while continuing to attend to detailed technicalities. Right now I would like to work for an employer that is looking for talented, committed and ambitious people to help them shape the future of their company.

QUALIFICATIONS Mechanical Engineering (dip. from Central Calcutta Polytechnic) 2013

Automobile Engineering (dip. from GTTI) 1997

I. Sc. (Bihar Intermediate Educational Council) 2000

H.S.L.C (Board Of Secondary Education Assam) 1993 WORKING EXPERIENCE

Time Tech – Jute Machinery Manufacturer

Q.C Engineer From Jan. 2013 – Dec. 2014

RESPONSIBILITIES :

Inspection, Stage Control & improvement, Preventive action, control process of wastage of material by changing in Design/ Tools & Techniques/Accessories, regular monitoring, Vendor development and Documentation. FABRICATION JOB: Welding Inspection visually by length and position (as per design), welding surface, uniformity, free from defects e.g- deposition of excess material/ spattering/ shoaling/ cracks/ porosity/ undercut etc. and finding the co-ordinate/ position of internal defects (from the reference co-ordinate/position) as per R.T/ U.T report, marking the defect position and made the repair job by the layman by grinding out the defective welding and re welding there, welding of 50 mm. Plate (C30, C40, C45). MACHINING JOB: Nesting of 50 mm. plate (C30, C40, C45) for water jet cutting used as the accessory fitted with Gable.

Use Steel:- Heat treatable Steel C30, C35Mn25, C40, C45, C50, C55Mn75 as per IS : 5517 (Class- 2 & 3); Steel use for component as per IS : 1875 (Class- 2 & 3) ; for Gable Steel Casting as per IS : 1030 (Grade- B). VXL Technologies Ltd. (Birla Group) – Defense Instrument & Accessory (Electronics) Manufacturer Engineer [D.D.C & Q.C] Sept. 2011 – Dec. 2012

RESPONSIBILITIES : Inspection, Stage Control & improvement, Preventive action, control process of wastage of material by changing in Design/ Tools & Techniques/Accessories, regular monitoring, Vendor development and Documentation for mechanical job only.

SHEET METAL JOB: Drawing/ Vendor Inspection of Aluminum sheet covers, diff. type of forming and punching operations of Commercial Aluminum as per IS : 737 - used for Signal Generator, Wattmeter (defense electronics instrument) and M.S as per IS : 2062.

FABRICATION JOB: Aluminum brazing as per IS : 6082 (Grade- T6); M.S. strip as per IS : 2062. MACHINING JOB: Prepare and modification of machining drawing and Q.C Inspection and Vendor development of diff. types of Aluminum alloy cavity for Signal Generator, Wattmeter (defense electronics instrument) as per IS : 6082

(Grade- T6).

Rotomac Electricals Pvt. Ltd. – Railway Traction Motor Manufacturer Draughtsman Sept. 2007 – Aug. 2011

(CAD Operator)

RESPONSIBILITIES :

Drawing of Railway Traction Motors, their Sheet metal, machining, casting and fabricated components, sub- assembly, assembly, Jigs and fixtures, checking gauges for checking of Sheet metal items, machining & fabrication jobs, M.P & I.P coil, M.P & I.P coil forming die, molding die, Pressing die and cementing die. Stage Inspection for vendor (dimensioning, machining and fabricated parts, follow up the mfg. process and checking the material testing report). M.P test for Casting item Axle Cap (P.E & C.E side of TM). 2

REFERENCES Available on request

Mrinal Das

[Mechanical Engineer (dip.)]

Mobile: +91-903*******

E-mail: actw5f@r.postjobfree.com

Skype : QCENGINEERMRINALDAS

SHEET METAL JOB: Drawing of Steel sheet components, diff. types of checking gauges /Go- No Go gauges/jigs/ fixtures. In house and vendor stage Inspection.

FABRICATION JOB: Prepare and modification of fabrication drawing for T.M component, checking gauges, fixtures. 1st. stage Inspection of fabrication job. Copper brazing for copper component. IS : 2062 Steel [Fe450 WB], (Grade-B) & Steel [Fe450 WC], (Grade-C)- Used for Magnate Frame IS : 513, CRCA (TATA Steelium CQ)- Used for M.P Core Plate. IS : 513, CRCA- Weldable quality suitable for fusion and spot weld. MACHINING JOB: Prepare and modification of machining drawing for T.M component, checking gauges, jigs and fixtures. Stage Inspection for vendor.

Metal used:- for Magnate Frame; Steel [Fe450 WB], (Grade-B) & Steel [Fe450 WC], (Grade-C) as per IS : 2062 for Bearing outer cap, commutator chamber, V- ring, V- cone; Steel Casting as per IS : 1030 (Grade- 230-450) for Bearing outer cap Steel Casting IS : 1030 (Grade- 230-450) ; for Housing Steel [Fe410 WB (Stress Relieved) as per IS : 2062, for Armature Shaft, Shaft Quill, Pinion; EN-24 as per BS 970, for shaft EN-18 (170 BHN min.) and EN-5 (240 - 341 BHN) as per BS 970, for M.P & I.P coil forming die, molding die, Pressing die and cementing die EN-8 as per BS 970.

Ramkrishna Engineering Concern – Manufacturer

Inspector Nov. 2000 – Aug. 2007

RESPONSIBILITIES :

Q.C. Inspection for Sheet metal, fabrication and machining components and checking Material test report and documentation.

D.P and M.P test for small Casting item.

Drawing of Boiler Pipelines, Boiler Steel Plate (High Tensile), Seamless steel pipe for high temp. service (up to 580 C expose to high pr. & folded in cold state) as per IS : 2002 (Grade-1,2A,2B), Planning and Drawing the Furnace cooling water [C.W] pipelines, Hydraulic and Pneumatic pipelines. SHEET METAL JOB: Inspection of forming and punching operation of Steel sheet(26-12 gauge) by diff. types of checking gauges /Go- No Go gauges/jigs/fixtures and dimensioning. FABRICATION JOB: Welding Inspection visually by length and position (as per design), welding surface, uniformity, free from defects e.g. - deposition of excess material/ spattering/ shoaling/ cracks/ porosity/ undercut etc. and finding the co-ordinate/ position of internal defects (from the reference co-ordinate/position) as per R.T/ U.T report, marking the defect position and give instruction to the worker to repair by grinding out the defective welding and re welding there. Inspection for the edge preparation of thick plate welding. Chassis of Gen. Sets (use channel as per IS : 808), sheet metal part of Heat chamber and Tea Machinery (Use 304 steel), Spot/Seam/Fillet/ V butt/double V butt weld, welding of 30/50 mm. Plate (C30, C40, C45 etc.). Steel Tubes, Steel Pipe fittings as per IS : 1239 (Part- 1 & 2). MACHINING JOB: Inspection (batch/lot/individual) of machining of different component through M/C checking gauge/special gauges. Use Steel:- Steel [Fe410] as per IS : 2062; EN-24 (260-310 BHN), EN-18 (170 BHN min.) as per BS 970.

TRAINING INDUSTRIAL AUTOMATION

HYDRAULICS & PNEUMATICS MSME CTTC, Kolkata 21/04/14 to 08/05/14

PLC MSME CTTC, Kolkata 09/06/14 to 08/07/14

CIRE (ROBOTICS) Technocrat Automation, Chennai 11/07/14 to 31/07/14

(IAO Certified)

CNC

CAD CAM MSME – DI Kolkata 10/05/10 to 12/07/10

SERVICE TRAINING (AUTOMOBILE)

Lucas India Service. (Kolkata) 29/06/97 to 04/07/97 Royal Enfield Ltd. (Madras) 03/02/97 to 08/02/97

Bajaj Auto Ltd. (Kolkata) 16/08/97 &

04/11/96 to 11/11/96

EDP MSME – DI Kolkata 07/01/16 to 20/01/16

3

REFERENCES Available on request

Mrinal Das

[Mechanical Engineer (dip.)]

Mobile: +91-903*******

E-mail: actw5f@r.postjobfree.com

Skype : QCENGINEERMRINALDAS

Mrinal Das

[Mechanical Engineer (dip.)]

Mobile: +91-903*******

E-mail: actw5f@r.postjobfree.com

Skype : QCENGINEERMRINALDAS

TECHNICAL

SKILLS MANUFACTURING

Q.A./Q.C. & T.Q.M. Practically experienced in –

Inspection, Stage Control & improvement, Preventive action, control process of wastage of material by changing in Design/ Tools & Techniques/Accessories and Documentation.

INDUSTRIAL AUTOMATION

HYDRAULIC & PNEUMATIC Hydraulics & Pneumatics programing and control, concept of Electro Pneumatic & Electro Hydraulic, it’s various functions, Circuit Design and Applications with 15days hands on practical experience in Industrial Automation Tools specializing in Electro Pneumatic & Electro Hydraulic and Troubleshooting.

PLC Programming languages such as LD (Ladder Diagram), FBD

(Functional Block Diagram) exposure in brand as Siemens with one month hands on practical experience in Industrial Automation Tools specializing in PLC.

CIRE (ROBOTICS) Hands on practical training in NACHI ROBOT Model: MC 20 - 01 in the field of Co-ordinate Systems, Pick & Place operation, Drilling & Milling operation, Loading and unloading using Sensor, Input and output configuration & memory mapping, Robot Inspection & maintenance.

CNC

CAD CAM Two months training in CNC Lathe (FANUC Control), VMC

(HAAS) milling and EDM Wire cut (ELECTRONICA).

SERVICE & MAINTENANCE

AUTOMOBILE Hands on practical experience in Service and Maintenance of Engine & Transmission system of vehicles from Royal Enfield Ltd., Bajaj Auto and Locus India Service Ltd. INDUSTRIAL Visited Royal Enfield Ltd., in Madras on Feb. 1997 and learnt about Service and maintenance VISIT of Vehicle.

Visited CNC workshop of CTTC and Shibpur Engineering College CNC Dept., in Kolkata on July 2010 and learnt about different types of CNC operation and programming.

(Manual & through DelCAM & MasterCAM software).

SAMINER SIX SIGMA

TECHNOLOGY FOR THE FUTURE MSME CTTC, Kolkata 07/06/14 COMPUTER PROFICIENCY DESIGNING TOOLS autoCAD (2D &3D), Solid Works (V-9) & Pro-E (wf-4)

PACKAGES MS Office, DTP

LANGUAGE C, C++

4

REFERENCES Available on request

Mrinal Das

[Mechanical Engineer (dip.)]

Mobile: +91-903*******

E-mail: actw5f@r.postjobfree.com

Skype : QCENGINEERMRINALDAS

PERSONAL INFORMATION Father’s Name Ganesh Ch. Das

Date of Birth 19th July 1976

Gender Male

Cast General

Marital Status Unmarried

Religion Hinduism

Nationality Indian

Languages known Bengali, Hindi, English and Assamese

Physically Challenged No

Physical Fitness Fit from all sides.

Eye Site 6/6 with glass

Hobby Listening Music and Gym.

CONTACT INFORMATION Permanent address C/O Dr. Ganesh Ch. Das. 45 Barasat Dasabhujatala, (Nearest

Type School) Chandannagar, Hooghly.

(W.B) India. Pin:- 712 136

Present address –Do–

Contact No. +91-903*******

e-mail actw5f@r.postjobfree.com

Skype I.D QCENGINEERMRINALDAS

DRIVING LICENCE NO. TWO WHEELER WB-012*********

LMV WB-15-114152&WB-15/LL/16608/15-16

NOTE: Willing to travel anywhere in or outside of India.

Contact this candidate