Welder Welding

Shane Aschenbrenner

** ****** ****, ****** *****. T7X OH9

(C) 587-***-**** (E) ******************@*******.***

Red Seal, Journeyman Welder with ABSA B pressure certification and CWB stick all positions. I have 9 years of experience scattered across a variety of welding processes & materials in a commercial and industrial environments.

I am a meticulous fitter, excellent at juggling multiple tasks and working under pressure. Broad industry experience includes Oil Field Equipment & rig manufacturing, high production pipe rolling & fixed position welds. Truck body Fabrication and modification.

HIGHLIGHTS

PUNCTUAL Blueprint literate-Organizational skills-Works well with others-Very fast learner-Strategic thinker-Welding safety precautions-Pipe fitting-Fabrication-well rounded- always eager for new experiences-Initiative to work independently.

SAFETY

CSTS-9.

OSSA Confined Space.

OSSA Fall Awareness.

ACCOMPLISHMENTS

Welded and passed six AWS in house tests, 2G & 4G FCAW on a 1" plate with a backer, 6G FCAW & SMAW 3" pipe with open root top half sch 80 and bottom half sch 40, 6G FCAW & SMAW 6" pipe with open root top half sch 120 and bottom half sch 80. All of which were x-rayed.

Initial B (May 17, 2012)

Small Bore (July 20, 2012)

STT root, SMAW fill & cap (October 16, 2012) Flat. STT root, Metalcore fill & cap (February 06, 2013) Flat. CWB Fluxcore (May 30, 2013) all positions. CWB SMAW (Aug 4, 2017) all positions. 6010 root, 7018 fill and cap (May 5, 2015) all positions. STT root, Fluxcore fill and cap (May 5, 2015) all positions.

In house 8010 root 8018 fill & cap in the 6G position (TransCanada).

Experience

Cormode & Dickson, Edmonton, Alberta.

B Welder/Fitter.

11/2015 to current.

All projects are TCPL, 100% x-ray. All stick welding. Mostly 8010-8018, some 6010-7018. Very high standards on visual and x-ray quality. Lots of position welds but usually roll welding. Spend some days just fitting to help out, I enjoy both tasks but find a better challenge in the welding aspect.

Aecom, Sherwood Park, Alberta.

B Welder

04/2015 to 11/2015

Worked all year on TCPL (Otter Lake) (Woodenhouse) (Liesmer). Majority of procedures called for 8010G root, 8018 fill and cap. Pipe sizes on this job ranged from 2" to 42". I'm responsible mainly for the position welds. Successful qualifiers are few and far in between and most employees only qualified to roll. Some position STT root on small bore. Roll welds are 8010G, 6010 and STT root with either 8018 or 7018 fill and cap. I have had very good success, somewhere around 1.5% repair rate.

Pro-V, Edmonton, Alberta.

B Welder

04/2014 to 04/2015

Mainly STT root 7018 fill and cap. Some Metal core root Flux core fill and cap as well as stick root, fill and cap. Pipe size varied from 2" to 40", 80% roll welds 20% position. Lots of experience with weld-o-lets, sockets and shoes.

Ranger, Acheson, Alberta.

Welder/Fitter

01/2014 to 04/2014

Truck body modification and fabrication. Responsible for fitting and welding custom fabrication. Some tig aluminum. Mostly wire feed.

Pillar, Edmonton, Alberta.

B Welder/Fitter

06/2013 to 12/2013

All 2" spool packages, mainly sour gas. Stick and STT roots, Stick and Fluxcore fill and cap. Lots of work in the mod yard all sch 160 16”-24”. Everything inside the shop was done on spinners, I was averging 70” a day on 2” pipe.

Willbros, Edmonton, Alberta.

B Welder/Fitter

06/2012 to 06/2013

mass pipe welding production 2”-36” various sch, mostly 6010 root 7018 fill& cap, some mig root 7018 fill & cap. Qualified on in house test for Trans Canada (1 of 4 out of the whole shop) very strict WPS all 8010 root 8018 fill & cap with a third party inspector watching over welding procedure, pre heat, interpass, post heat and 3/32 max cap and root pen. No tolerance. I welded several 36”, 16” & 12” posi and roll joints about 50 welds on that job, came back with only one repair. All welds were 100% x-ray and hydro under the sour gas code. Also welded lots of lap rings that were ultrasonically tested, no fails. Lots of fluxcore and metalcore structural welds as well.

Fossil, Nisku, Alberta.

B Welder/Fitter

04/2012 to 06/2012

Made water tight electrical shacks for oil rigs. Fit & welded skids, panels, roofing. Rolled to 6” pipe mig root 7018 fill and cap.

The Rig shop, Edmonton, Alberta.

Welder/Fitter

03/2011 to 04/2012

Responsible for pipe fitting low pressure & high pressure lines off of mud pumps in the pump house. Also responsible for welding all high pressure lines majority of which are spun for time saving purposes, also position weld if required. All high pressure lines ranged from 2" xxh to 5" xxh and are x-rayed for quality (I have not failed one). I have also successfully repaired failed x-rays. Fabricate & Install shrouding, doors, tables, pipe clamps, motor mounts, exe. Fit and weld skids. Fit,weld, and install roofs & hatches.

Empire International Rig MFG, Edmonton, Alberta.

Welder/Fitter

08/2010 to 03/2011

FCAW & SMAW production welding, GTAW & MIG aluminum fitting and welding. Similar duties as at The Rig Shop except no pipe fitting or welding. Lots of repair and refurbishing of worn out and damaged product.

The Rig Shop, Edmonton, Alberta.

Welder/Fitter

12/2009 to 08/2010

(same as above no pipe welding yet)

Nait

06/2009 to 12/2009

The Rig Shop, Edmonton, Alberta.

Welder/Fitter

05/2008 to 06/2009

(same as above)

Western Truck Body MFG, Edmonton, Albeta.

Welder/Fitter

01/2006 to 05/2008

I fabricated a variety of truck bodies, wireline, hydro testing, service rigs, lube trucks, exe. Responsibility ranged in between welding, fitting, manufacturing of water seal doors, installing shelfs & drawers, run electrical wiring, mounting bodies on truck frames (modify frame if necessary). Also repaired and refurbished old units. Materials worked on were carbon steel, satin coat steel, galvanized, and aluminum.

Contact this candidate