Maintenance Electrical
Resume:
K. GREGORY EDMONDS
Brooklyn, NY 11212
******.*******@*****.***
PROFESSIONAL ELECTRICIAN AND ELECTRONICS ENGINEER
Maintained, performed and managed computer electronics repair services and managed all trouble calls.
Made all necessary adjustments and replacements to ensure proper operation of all residential lighting and power systems.
Managed repairs through related mechanical, electrical, and electronic system schematics analyses.
Proficient in the use of Autodesk AutoCAD 3D and Solid Works 2012 in the design of the electrical and electronic systems components.
Experienced and proficient in the use of ammeters, voltmeters, ohmmeters, and other test equipment.
Experienced in reading electrical blueprints, schematics and wiring diagrams.
Performed maintenance and repairs on various radio and alarm systems.
Performed preventive and corrective maintenance on various three-phase 450 volt, 4000 amp or more power systems, the installation of new equipment, additions and alterations.
Expert in the preventive and corrective electrical maintenance on motors, generators, and controllers and related power generation equipment.
Independently calibrated all electronic test equipment used for troubleshooting and repair.
Knowledgeable with the operation and maintenance of PLC’s and electrical relays.
EDUCATION AND PROFESSIONAL TRAINING
Grantham University
Electronics Engineering Technology, Bachelor of Science Degree (In Progress)
Computer and Electronics Engineering Technology Associate of Science Degree (June 19, 2013)
Vaughn College of Aeronautics and Technology
Federal Communications Commission Marine Radio Operators Permit (February 10th, 2013)
United States Transportation Service Administration
Transportation Worker Identification Card
United States Coast Guard
Merchant Mariner Credential
NetCom Information Technology
AutoCAD LT 2011(January 30, 2011 - March 13, 2011)
Cisco Certified Entry Network Technician (CCENT) (June 11, 2012 - June 15, 2012)
Cisco Certified Network Associate (CCNA) (June 25, 2012 - June 29, 2012)
A+ and Network+ Certification (July 30, 2012 - August 10, 2012)
Installing and Configuring Windows 7 Client Accelerated (August 13, 2012 - August 14, 2012)
United States Navy Engineering Electrical Core School (November 8, 2000)
Electrical and electronic schematic reading and AC/DC circuit theory.
United States Navy Engineering Electrician’s Mate Class “A” Technical School (December 14, 2000)
Electrical maintenance and circuit theory.
United States Navy Engineering Electrician’s Mate Surface Ship’s Advanced Electrical and Electronic Maintenance School (May 14, 2005)
Analog and digital circuit theory and electronic troubleshooting techniques.
United Services Military Apprenticeship Program (March 28, 2008)
Electrical Journeyman
PROFESSIONAL EXPERIENCE
Service Engineer April 2015-Present
Oil Field Solutions US Limited
Maintaining, repairing and commissioning the PW Swift Pac FT 8 gas turbine package that offers 30 or 60 megawatts of power.
Configuring gas generator gas generator power turbines that are optimized for general power generation at 3000 or 3600 RPM and mechanical drive at 5500 RPM nominal speed.
Investigation, troubleshooting and resolution of issues that occur on shop floor processes that effect product quality, yield cost and performance.
Maintained, installed and repaired gas turbine generator packages that were either single or dual engine configurations.
Commissioned, maintained and repaired Swift Pac gas turbine generator packages that offered greater than 41 percent simple cycle efficiency and a nominal 60 to 120 megawatts within a modular design using aero-derivative technology.
Analyses and interpretation of metallurgical testing results and their impact on repair methods and techniques for PWPS gas generators and power turbines and associated systems in nuclear and natural gas power applications.
Perform blade changes on the turbine and familiar with using laser alignment and dial indicators where required on associated mechanical systems.
Understand electrical and mechanical components, schematics and configurations associated with gas turbine systems in power generation plants.
Support new systems and equipment by providing online and in service support throughout the world.
Knowledgeable of Woodward Governor, Allen Bradley and Siemens Control Systems associated with PWPS, GE and Rolls Royce gas turbine generator power systems.
Instrumentation and Electronics Technician October 2014-February 2015
Crestwood Midstream Partners LP
Safely performed duties to include, but not limited to, install, configure, test, calibrate, operate, troubleshoot, maintain and inspect transmitters, pressure and level controllers.
Troubleshoot and repair analyzers, AC motor starters, VFD’s, control circuits, and PLC operations.
Identify and analyze failures, indicate underlying issue and, as needed, perform Root Cause Failure analysis.
Responsible for installation and maintenance of electrical, electronic and pneumatic components on compressor units, generator control panels and units, pump units, ignition systems and air fuel ration systems.
Prior to beginning tasks ensured proper LOTO procedures and safely isolated and de-energized equipment.
Used and understand the principles of operation of all meters and instruments used in applicable instrumentation and electronic projects and start-ups.
Read and interpret drawings, schematics, sketches and specs in order to make recommendations for proposed installations and completed projects.
Make recommendations for improvement, replacement and additions of instrumentation and electronic equipment required for safe and continued operation, including cost estimates.
Routinely schedule and perform preventive maintenance and also accurately record all maintenance and repair of all equipment.
Inspected existing panels to insure proper function and application.
Assisted in control system start-ups, commissioning, designs and reviews.
Assisted in creating departmental procedures and insures that all I&E staff are trained properly.
Stayed current on all new equipment and technical trends in electronics, communication and automation systems and equipment.
Performed maintenance on substation control circuits and relay panels.
Proficient in the safe and efficient operation of electrical system relays and associated circuits and control systems.
Electronic Engineer April 2014 - July 2014
Nabors Drilling USA
Performed PLC programming as needed for the installation, maintenance, and repair of electronic circuitry.
Provided support for PLC control systems, hydraulics, engines, pumps, 25 KVA diesel generators and all associated equipment on oil and gas drilling rigs.
Implemented the development and debugging of Siemens SL7-300 PLC, Allen-Bradley RSLogix, ABB controls and variable frequency drive systems.
Lead and participated in the construction, installation, modification, maintenance and repair of drilling rig systems, facilities and related electronic controls and devices by interpreting blueprints, manufacturer’s specifications and written as well as verbal instructions.
Diagnosed malfunctioning systems, apparatus, and components through the use of test equipment and hand tools to locate the cause of failure.
Assisted in the establishment of preventative maintenance programs for electro-mechanical, electronic and electrical systems and facilities.
Performed field service maintenance and repair on capital machinery with pneumatics, hydraulics, AC/DC motor controls, and PLC’s and servo systems.
Ensured all vital electronic control systems are operating effectively to minimize downtime.
Made extensive repair and replacement of bearing assemblies, drive assemblies, pumps and gear boxes.
Performed preventative maintenance on low and medium voltage switchgear motors, power distribution systems, HVAC systems and batteries.
Electronic Technician September 2013-March 2014
Trican Well Service
Performed inspection, repair, adjustment, instillation and removal of instrument and controls equipment and wiring.
Maintained, troubleshoots and writes minimal programming changes for PLC’s and field system controls.
Responsible for continuously maintaining the lines of production by specifically fine tuning electrical and electronic equipment maintaining and increasing output.
Maintains repairs and calibrate electronic equipment and control systems.
Performed tasks associated with the test and repair of equipment including taking apart and reassembling of components after repairing or replacing parts.
Continuously inspects equipment and evaluates their designed performance.
Maintains and troubleshoots AC drives and variable frequency drives.
Responsible for the instillation, testing, repair, calibration, inspection and maintenance of instrumentation systems on the field associated with the process of hydraulic fracturing and oilfield process equipment.
Maintained and repaired mechanical, hydraulic and pneumatic oil and gas field machinery.
Prepares maintenance reports by collecting, analyzing and summarizing information and trends.
SCADA Operations Specialist May 2013-July 2013 TekBank Consultants
Monitor SCADA alarming systems to ensure they are functioning properly and call out lists are accurate and up to date.
Program, configure and maintain SCADA objectsin SCADA system that model field assets.
Controlled and maintained programmed Human Machine Interface (HMI) screens for monitoring real time data, acknowledging alarms and controlling set points.
Maintained I/O, data collection and automation interfaces at key facilities.
Made operational changes and adjustments to SCADA as required securing, safe, continual and sufficient operation.
Implement system modes of operation according to required system protocol.
Reviewed and ensured that SCADA control room log readings and analyses are properly recorded and that any necessary follow-ups and corrective actions are being handled by the appropriate fire and life safety personnel.
Maintained constant watch over all operating equipment through monitoring control room instrumentation.
Ensured that equipment is performing according to prescribed characteristics for safe and efficient operation.
Electro-Mechanical Field Service Technician February 2009 - July 2010
MTA New York City Transit
Maintained the safe and successful operation of elevators, escalators, railway swing bridges and power walks of the New York City subway system.
Managed all trouble calls and maintenance updates for the real time status of operating equipment.
Repaired and maintained thirty-five hydraulic and traction elevators within the New York City Transit system.
Maintained, installed, and repaired station elevator safety devices, and door operators.
Ensured the proper operations of elevator door reopening devices, stop key switches, operating control/leveling devices, car emergency alarm/communication and car/hoist way doors.
Made all necessary adjustments and replacements to ensure proper operation of elevator motor control panels.
Managed the maintenance and inspection of elevator hydraulic and traction control units.
Ensured the proper operation of the elevator and escalator remote monitoring system.
Managed repairs through related mechanical, electrical, and electronic system schematics analyses.
Locomotive Electrical Technician October 2008 - December 2008
Motive Power Industries
Worked in the design of the electrical and electronic components and emergency use electro-mechanical diesel locomotive based on customer specifications and standards.
Helped design and test of the J1939 communication system for diesel locomotive systems.
Tested the development of the Logic Communication Control system for NYCT prototype with Motive Power Industries.
Performed the installation of Siemens electric power inverters.
Coordinated all construction planning with the NYCTA R-156 Diesel Project.
Performed tests on interior communication and buzzer signal systems.
Performed adjustments and stored parameters on non-volatile control system software.
Made equipment parameter values in decimal notation expressed in customary units.
Inspected the electro-magnetic compatibility and interference specifications in accordance with contracted customer specifications.
Performed maintenance and testing on illuminated signal indicator systems.
Performed quality assurance testing and assisted in the development of hardwired bypass and cutout circuits.
Assisted in the design and testing of automatic fault detection circuits and devices.
Assisted in the design and operational testing of unit HVAC control systems.
Developed and tested the over heat and loss of air flow protective devices.
Made design calculations for the HVAC system including cooling analysis, heating load analysis, and drawing to industry standards.
Electrical Technician May 2000 - May 2008
United States Navy
Repaired various electrical-mechanical devices, and HVAC systems.
Environmental metrology tool use, such as thermocouples, temperature/humidity and airflow.
Made test equipment setup and hardware installations. Calibrated all electronic test equipment used for troubleshooting and repair. Maintained and repaired radio frequency support electric systems.
Installed and re-engineered electrical power systems, and soldered circuit boards for power supplies saving the organization $580,000 in repair cost.
Interpreted electrical schematics and diagrams and repaired various electrical and electronic systems.
Supervised and trained over fifty electricians in troubleshooting electrical support equipment, solid state electronic, and special frequency controls and also power supply systems.
Inspected repairs done on various electrical power systems to maintain quality assurance.
Experienced in troubleshooting of computer control systems, hardware and peripherals.
Performed corrective and preventive maintenance on power and lighting circuits, control switches, fuse panels, and electrical distribution systems.
Experienced and proficient in the use of ammeters, voltmeters, ohmmeters, and other test equipment.
Maintained the safe and successful operation of the gas-turbine and steam power generation plants.
Experienced in reading electrical blueprints, schematics, and wiring diagrams.
Performed maintenance and repairs on various radio, alarm, and fiber optic systems.
Repaired and maintained electro-optical systems to include night vision equipment and forward looking infra-red systems.
Monitored, repaired, and maintained the operation of data multiplexing systems, process analyzers, systems data processors, and measurement and control devices.
Performed maintenance and repairs on turbine temperature indicators, flame detectors, AC/DC drives, servomotors, pneumatics and hydraulic systems.
Performed preventive and corrective maintenance on various three-phase 450 volt, 4000 amp or more power systems, the installation of new equipment, additions, and alterations.
Knowledgeable in Windows NT, Microsoft Works, Microsoft Office Excel, Microsoft Office PowerPoint, Microsoft Outlook 2003, and Microsoft Word.
Expert in the preventive and corrective electrical maintenance on motors, generators, controllers and related power generation equipment. Knowledgeable in liquid cell and dry cell electrical battery maintenance and back-up systems.
Managed and performed communication and electrical cable installation, repair, and maintenance.
Contact this candidate