Drilling Engineer
Resume:
MOHD FARHAN B YAHYA
EDUCATION BACKGROUND
Universiti Teknologi PETRONAS, Tronoh, Perak (2005-2009)
Bachelor of Engineering (Hons) Mechanical
Specialization: Petroleum Engineering
Latest Results
CGPA: 3.05 GPA: 3.57
Dean’s List : 2 semester
Pahang Matriculation College (2004-2005)
Physical Science
CGPA: 3.07
SBP Sains Johor, Kluang (2002-2003)
Sijil Pelajaran Malaysia (SPM)
5A, 4B
SBP Sains Johor, (1999-2001)
Penilaian Menengah Rendah (PMR)
7A, 1B
WORKING EXPERIENCES
Company Scomi KMC Sdn. Bhd.
Division Engineering
Position Service Engineer - DWM
Duration 2 Years & 2 Months (July 2013 – CURRENT)
Real Project Involvement
1.Well Miri By Petronas Carigali SB and UJD at Hakuryu-5 Semi Sub Rig 2.Tahan-1 Miri By Petronas Carigali SB and UJD Company at NAGA-1 Semi Sub Rig 3. Jemuduk-1 Miri By Petronas Carigali SB and UJD Company at NAGA-1 Semi Sub Rig 4. KN-B3 Kota Kinabalu By Petronas Carigali SB and ABAN at DD3 Jack Up Rig 5. D-12 Miri By Shell Sarawak and ENSCO Company at Ensco-105 Jack Up Rig 6. Laila Miri By Shell Sarawak and ENSCO Company at Ensco-105 Jack Up Rig 7. Seri Aman Miri By Petronas Carigali SB and UJD Company at NAGA-1 Semi Sub Rig Work Description
2 Years & 2 Months at Scomi KMC SDN BHD:
o Do Job survey to plan for the equipment, items, and location needed for solid control equipment include cutting dryer, centrifuge, filtration unit and mud cooler units o Prepare for the project equipments that needed to be load onboard o Install or rig up unit onboard of mud cooler and its accessories o Operate solid control unit to get the desired mud condition to smooth the drilling activity o Monitor and keep maintain solid control unit to make sure in good hand o Uninstall or rig down all our unit and send back to town o Fabricate new design of mud cooler unit, and its accessories o Doing final inspection and test before ready to be sent to next rig o Future: same goes to Centrifuge Unit, Cutting dryer and Filtration Unit Learning Outcomes &
Involvement
- Familiarize with the fabrication working procedure and hands-on job
- Familiarize with the environment at semi sub rig & warehouse
- Having high level confident to work with clients, other services company and rig crew
- Familiarize with rig up, operate, maintain, troubleshoot, and recondition Heat Exchanger unit, centrifugal pump, submersible pump and etc
- Familiarize with all solid control equipment such cutting dryer, centriguge and filtration Company Antamahir Sdn. Bhd.
Division Engineering
Position Senior Mud Cooler Engineer & Wellbore Clean Up Engineer Duration 2 Years & 10 Months (October 2010 – July 2013) NIRC 860***-**-**** Languages Malay & English (spoken & Age 29 written)
Place Of Birth Johor Mailing Address 6, Jalan Pisang Raja 2, Taman Harmoni, 86000
Kluang, Johor.
Gender Male
Marital Status Married
Nationality Malaysian Driving License B2 and D Class Willing to Relocate Yes Date Available AUGUST 2015 Willing to Travel Heavy (100%) Email Address actetg@r.postjobfree.com Scholar PTPTN
(Non Bonded)
Contact No +601*-*******/
Real Project Involvement
1. Spaoh-1 Bintulu By Petronas Carigali SB and Transocean at SEDCO-601 Semi Sub Rig 2. Menggatal-1 Kota Kinabalu By Petronas Carigali SB and UJD Company at NAGA-1 Semi Sub Rig 3. Sepat Barat Deep-2 Terengganu By Petronas Carigali SB and Vantage at Aquamarine Driller Jack Up Rig 4. Kenari-2 & NC8-SW1 Miri By By Petronas Carigali SB and Transocean at Semi Sub Rig 5. Kasawari-1 Miri By Petronas Carigali SB and JDC at Hakuryu-5 Semi Sub Rig 6. Sepat Barat Deep-2 Terengganu By Petronas Carigali SB and Vantage at Aquamarine Driller Jack Up Rig 7. Pujut-1 & Tukau Timur Miri By Petronas Carigali SB and Vantage at Aquamarine Driller Jack Up Rig 8. Angsi-C Terengganu By Petronas Carigali SB and Rowan Companies at Rowan Gorilla-2 Jack Up Rig 9. Andong Kechil 1 Baram By Nippon Oil and Nabors at Nabors-503 Land Rig 10. F06-104 Miri By Sarawak Shell EPA and Seadrill at West Alliance Tender Rig 11. Resak-A Terengganu By Petronas Carigali SB and Seadrill at Tioman T-9 Tender Rig 12. Bunga Seroja A Kota Bahru By Talisman Malaysia LTD and Noble Drilling at Noble George McLeod Jack Up Rig Work Description
2 Years & 10 Months at ANTAMAHIR SDN BHD:
o Do Job survey to plan for the equipment, items, and location needed for mud cooler units o Prepare for the project equipments that needed to be load onboard o Install or rig up unit onboard of mud cooler, centrifugal pump, submersible pump, pump starter box, and hoses o Operate mud cooler unit to get the desired temperature for the mud to smooth the drilling activity o Monitor and keep maintain our unit to make sure in good hand o Uninstall or rig down all our unit and send back to town o Maintenance all units came back from rig and do services and checked o Fabricate new design of mud cooler unit, and its accessories that involve high pressure water jet, grit blasting, painting, welding and all other mechanical works
o Doing final inspection and test before ready to be sent to next rig o Prepare a good and clean well condition for running completion or well test equipment o Prepare the casing prior to install casing for setting whipstock job o Polish the packer setting depth and gauge the ID of the casing o Remove all unwanted debris from wellbore such rust, scale, cement, and sheet o Remove all hydrocarbons, grease, and mud film from walls of the casing o Displace the wellbore to clean filtered completion brine prior to install the upper completion Learning Outcomes &
Involvement
- Familiarize with the standard such as API, ASME and ASTM
- Familiarize with the fabrication working procedure and hands-on job
- Familiarize with the fabrication equipment such as Heat exchanger, flow meter turbine, centrifugal pump, submersible pump and etc
- Familiarize with the environment at semi sub rig, jack up rig, tender rig, land rig and warehouse
- Having high level confident to work with clients, other services company and rig crew
- Familiarize with rig up, operate, maintain, troubleshoot, and recondition Heat Exchanger unit, centrifugal pump, submersible pump and etc
-Familiarize with dress downhole tools, make up, running in hole, pull out of hole tools Company BoilerMaster Sdn. Bhd. (BMSB)
Division Engineering
Position Project Engineer
Duration 1 Year & 3 Months (July 2009 – September 2010) Real Project Involvement
1. Servicing boiler and valve at LNG Tenaga Lima
2. Servicing boiler and valve at LNG Puteri Delima 3. Servicing boiler and valve at LNG Puteri Intan Satu 4. Design and fabrication of diesel tank (Brunei) for Joffren Omar Co. SB 5. Design and fabrication of heat exchanger for Titan Petchem Eng 6. Service and HPWJ 30 units of heat exchanger at KR1 Shut Down 2010 at Petronas Penapisan Terengganu 7. Servicing and repair heat recovery steam generator at Titan Petchem Eng. 8. Service and repair 3 unit of furnace,valve and strainer at Titan Petchemical Eng. 9. Refractory and servicing 2 unit boiler for Titan Petchem Eng. 10. Turn Around 2010 Titan Johor Port service and HPWJ vessel and heat exchanger for Titan Petchem Eng. 11. SOGCA Exhibition at Kota Kinabalu 1st Borneo Exhibition 12. Retubing air cooler for LNG Tenaga Lima
Work Description
1Year & 3 Months at BOILERMASTER SDN BHD:
o Check and review all AFC & IFC Drawing issued to be confirming on the job descriptions and details o Come out with Work Procedure for the job at the Projects o Come out with Tender document to bid the project by providing Technical Proposal, Engineering Description, Working Procedure and etc
o Provide client with WPS, PQR, WPQ, AND PQT for their approval on our job qualification o Coordinate, plan & monitor project progress. To ensure there is a good coordination between department
(Engineering, Procurement, and Material etc) and inter discipline in order to resolve any related issue at the site
o Remind supervisor & subordinates regarding the scope of work and project requirement timely. To ensure that all the work done is according to QA procedure and comply with safety regulation (JSA, PTW & etc) o To monitor on site progress, to ensure the project progress is in line with planning and comply with the project requirement & standard
o Design the fabrication for new equipment such as Heat Exchanger, vessel, tanks and etc by using AutoCAD, ANSYS, and PV-Elite
Learning Outcomes &
Involvement
- Familiarization of engineering drawing (PNID, Installation, General Arrangement, Equipment)
- Familiarize with the standard such as API, ASME, ASTM and ANSI
- Familiarize with the fabrication yard working procedure
- Familiarize with the fabrication equipment such as Heat exchanger, boiler, vessel, and etc
- Familiarize with the environment at yard, plant, refinery and etc workplace
- Familiarize with the engineering design by using AutoCAD, ANSYS, CATIA and PV-Elite
- Having high level confident to meet client to talk about business and other INDUSTRIAL INTERNSHIP
Company Malaysia Marine & Heavy Engineering Sdn. Bhd. (MMHE) Division Engineering & Construction (PMT Structure) Position Apprentice / Training Engineer
Duration 8 months (December 2007 – July 2008)
Real Project Involvement
Engineering, Procurement, & Construction (EPC) for Gumusut Kakap Semi Submersible Floating Production Storage Project (FPS).
Client: MALAYSIA INTERNATIONAL SHIPPING CORPORATION SDN. BHD. (MISC) Principle: Sabah Shell Petroleum Company. (SSPC)
Work Description
8 months at Gumusut Kakap Semi FPS Project Management Team:
Check and review all AFC & IFC Drawing issued
Assisting Mechanical Superintendent & Mechanical Engineer in producing Work Procedure and Tender document
Study, understand & familiarize with the project requirement by reading D.E.P, Technical Specification & Project procedure
Assist Mech. Supt & Mech. Engineer to coordinate, plan & monitor project progress. To ensure there is a good coordination between department (Engineering, Procurement, and Material etc) and inter discipline
To remind supervisor & subcontractor regarding the scope of work and project requirement timely. To ensure that all the work done is according to QA procedure and comply with safety regulation (JSA, PTW & etc)
To address any issue or on site problem highlighted by supervisor & sub-con to Mech. Supt & Mech. Engineer for resolution. Assist Mech. Supt & Mech. Engineer to resolve the issue
To monitor on site progress, to ensure the project progress is in line with planning and comply with the project requirement & standard. To gather info from site supervisor and to update daily progress report Learning Outcomes &
Involvement
- Familiarization of engineering drawing (PNID, Installation, General Arrangement, Equipment)
- Familiarize with the standard such as ASME, ASTM and ANSI
- Familiarize with the fabrication yard working procedure FINAL YEAR PROJECT
Title Design and Development of a Vacuum Chamber for Resin Infusion Process Descriptions - The research will cover the designing and the development of a vacuum chamber to be used for Resin Infusion process. Software used: ANSYS, CATIA and AutoCAD. Objectives - To design and develop a vacuum chamber which also function as a resin trap for use in resin infusion process.
- To analyze the performance of the vacuum chamber by means of a leak test.
- In this study, the scope shall cover the design, analysis and development of the vacuum chamber. COMPUTER RELATED SKILLS
PROGRAMMING LANGUAGES C Language, OTHERS
DESIGN SIMULATION GAMBIT, ANSYS, ADAMS Microsoft Office Adobe Photoshop &
Illustrator
MATHEMATICAL ANALYSIS MATLAB
TECHNICAL DRAWINGS AutoCAD, CATIA, RF Flow
REFERENCES
Asri Bin Baijuri
Base Manager,
Weatherford (Malaysia) Sdn Bhd.
Email: actetg@r.postjobfree.com
Mohd Shahri Bin Razali
Senior Project Engineer,
Boiler Master Sdn. Bhd.
Email: actetg@r.postjobfree.com
Muhamad Ridzuan Abdul Latif, DIC
Supervisor for Final Year Project,
Email: actetg@r.postjobfree.com
Mohammad Iqbal Bin Hadzir
Drilling Solution Engineer, (Mi Swaco Schlumberger)
Email: actetg@r.postjobfree.com
Contact this candidate