Welding Quality

CURRICULUM VITAE

EDWIN R. ONILONGO

U**/** Shane Avenue, Deception Bay, Qld 4508

Mobile No.: (04) 5262 1171

Passport No.: EB2662132

Email Add: *****************@*****.***

OBJECTIVE:

My main purpose is to secure an opportunity where I can utilize my skills and broaden further my knowledge while contributing to the growth of the Organization.

POSITION DESIRED:

ALUMINUM WELDER

Welding Process:

SMAW (Carbon Steel/Stainless Steel)

GMAW (Carbon Steel/Stainless Steel/Aluminum)

FCAW (Carbon Steel)

WORK EXPERIENCE:

Name of Employer: EAST COAST BULLBARS PTY. LTD / CUSTOM ALLOY

(August 13, 2014 – July 17, 2015)

25 Business Drive, Narangba, QLD 4504

Tel. no.: (07) 3204 1266 Fax no. : (07) 3204 2660

Email Add: *****@***********.***.**

Website: www.customalloy.com.au

Position: Aluminum Welder/ Fabricator

Duties and Responsibilities:

* Arranging of all materials per item number

* Mark and trimmed the pipe in correct size

* Perform of welding in GMAW process and cutting of pipe by using of band saw cutting machine.

* Always clean the pipe before assemble to avoid welding porosity.

Contact Person: Mr. Trevor Long (Manager)

Tel. number: (07) 3204 1266

Name of Employer: Yamama Cement Company ( July 20, 2013 – Feb. 28, 2014)

Old Al-Kharj road, Riyadh, K.S.A

Tel. / Fax No.: +966-**-***-****, +966-**-***-**** / +966-**-***-****

Email Add: **********@************.*** / ****@************.***

Website: www.yamamacement.com

Position: S M A W welder c s / s s (all position)

Duties and Responsibilities:

* Perform full welding and cutting of plates and pipes.

* Checking of thickness of the plates and pipes before start of cutting and welding.

* Always prepare of fire extinguisher in all hot work process.

* Always apply the essential of welding in plates and pipes for a good quality of it.

Contact Person: Peter Glenn Ojoy (Plant Mechanic)

Mobile No.: +966-*********

Contact Person: Edgardo Cabida (Air Compressor Supervisor)

Mobile No.: +966-*********

Name of Employer: A. Bilog Glass and Aluminum Supply (Feb. 8, 2013-July 11, 2013)

Hernandez St., Darangan, Binangonan, Rizal

Tel./ Cell. No.: +639********* / +639*********

Position: Aluminum Fabricator

Duties and Responsibilities:

*Preparation and analyzing of the size of all materials from the drawing.

*Lay-out, cutting, drilling, filling of the materials such as railings of the frame, panels, etc.

*Assemble of the parts of materials.

*Perform of cutting of glass such as tempered glass, annealed glass.

*Covering of plastic wrapper of all finished product.

*Maintaining the quality of work.

Contact Person: Anselmo Bilog

Mob. no. : +639********* / +639*********

Name of Employer: Abu Dhabi Ship Building (April 20, 2008 – September 23, 2012)

P. O. Box 8922, Abu Dhabi U.A.E.

Tel. / Fax No.: +971-*-******* / +971********

Email Add: *****@****.**

Website: www.adsb.ae

Position: SMAW c s/s s (2G/3G/4G/6G), GMAW c s/s s/Aluminum (2G/3G/4G), FCAW c s (3G/4G)

Duties and Responsibilities:

*Perform full welding from various departments with help of welding torches and arcs such as insert pl., base pl., girder, stiffener pl., penetration pipe, etc.

*Analyzing and identifying defective equipments and inform to the supervisor.

*Monitoring all welding joints to find any shrinkage and distortion of metal.

*Cleaning of all weld joints to obtain smooth look by using of disk grinder chipping hammer, and steel brush.

*Using of E6010, E7018, E306, E309 electrode depend on procedure and metal.

*Maintaining a weld size and quality.

*Perform of cutting metals by using manual gas and plasma cutting.

Contact Person: Orlando Ladrido (Safety Inspector)

Tel. No: +971 (02) 5028601

Mob. No: +971-*********

Name of Employer: HDM Engineering and Machine Shop, Philippines (August 15, 2006 – April 05, 2008)

Darangan, Binangonan, Rizal

Mobile No.: +63-926******* / +63-949*******

Position: Welder / Fabricator

Duties and Responsibilities:

*Evaluation of the drawing and performing actually.

*Perform all welding work with the help of forming and cutting, such as window grills, water tanks, etc.

*Maintaining the weld size and cleaning of all spatters in welding joints by using of disk grinder, chipping hammer, and steel brush.

Contact Person: Hector R. Del Mundo (Owner)

Mob. No: +63-926******* / +63-949*******

Name of Employer: Al-Babtain Power and Telecommunication (August 2, 1998 – April 14, 2006)

P.O. Box 88373, Riyadh 11662 K.S.A.

Tel./ Fax No.: +966-*-***-**** / +965-*-***-****/241-0228

Email Add: *******@**-*******.***.**

Website: www.al-babtain.com.sa

Position: Welder / Fabricator

Duties and Responsibilities:

*Perform full welding and fabricating of all kinds of telecommunication poles from engineering drawings up to actual.

*Perform cutting of base plate up to 50mm thick. And layout of the hole of the plate and drill.

*Full welding of the base plate and clean and remove of the spatter of the welding joints by using of disk grinder, chipping hammer, and steel brush.

*Maintaining of the size of the welding and quality.

*Perform of cutting of metal such as base pl., stiffener pl., collar pl., etc. by using of manual gas cutting and plasma cutting.

*Using of E6011, E6010, E7018, E306, E309 electrode depend on procedure and metal

Contact Person: Karl Franco (Industrial Engr.) / Andrew Belo (Assistant IE)

Tel. No: +966-******** ext. 3557

Mob. No: Karl +966-*********) / Andrew +966-*********)

Name of Employer: Steel Centre, Philippines, Inc.

(March 12, 1998 – May 22, 1998)

Amang, Rodriguez Ave., Manggahan, Pasig City, Philippines

Tel. No.: 641-5690/641-5936/641-6115

Fax No.: 641-6118

Position: SMAW c s/s s (2G/3G), GMAW c s (2G/3G)

Duties and Responsibilities:

*Perform full welding from various departments with help of welding torches and arcs.

*Analyzing and identifying defective equipments and inform to the supervisor.

*Monitoring all welding joints to find any defects to metal.

*Cleaning of all weld joints to obtain smooth look by using of disk grinder, chipping hammer, and steel brush.

*Using of E6011, E6010, E7018 electrode depend on procedure and metal.

*Maintaining the size of the welding and quality.

Contact Person: HRD

Tel. No: +632-*******

Name of Employer: B.F. METAL CORPORATION, Philippines

(October 15, 1996 to November 29, 1997)

Cainta, Rizal 1900, Philippines

Tel. No.: +632-***-****

Fax No.: +632-***-****

Position: Welder / Fabricator

Duties and Responsibilities:

*Perform full welding and fabricating from various departments with the help of welding torches and arcs such as base pl., stiffener pl., connector pl., flanges, groove joints, etc. *Read and interpret the drawing and fabricate such as H-column, box column, trusses, girder, etc.

*Perform cutting of materials using of manual gas cutting and oxyacetylene from the cutting list and lay out of the hole such as connector pl., base pl., stiffener pl., top pl., etc.

*Monitoring of all welding joints to find any defects from the welding.

*Maintaining the size and quality of the welding.

*Cleaning of all welding joints and remove welding spatter from the joints by using of disk grinder, chipping hammer, and steel brush.

Contact Person: Edgardo Samar

Position: Welding Inspector

Mob. No.: +63-921*******

Name of Employer: HOOVEN Philippines, Inc. (April, 1994 – August, 1996)

Francisco Felix Ave., Cainta, Rizal 1600

Tel. No.: 655-1081

Fax No.: 656-7958

Position: Aluminum Fabricator

Duties and Responsibilities:

*Reading the drawing and analyze all materials from material list before fabricate.

*Measuring all the size of materials from the given size of the material list.

*Lay-out, cutting and drilling of materials.

*Covering of plastic wrapper of all finished product.

*Maintaining the quality of work.

Company Status: Closed

In the year 1990 due to lack of financial assistance I decided not to continue my studies anymore, so instead of doing nothing, I volunteered to help my father in working in our farmland up to the year 1994, after that I’ve decided to apply in an aluminum company which was Hooven Philippines Incorporated in Cainta, Rizal, near in my place as a trainee from April 1994.Within two months of training, the company decided to absorb all of the trainees to become an employee of their company as an aluminum fabricator until I finished their contract then I’ve tried to apply again in other company named as: B.F. Metal Corp., Steel Centre etc.

EDUCATIONAL ATTAINMENT:

TERTIARY: Rizal Technological and Polytechnic Institute

1989 – 1990

Bachelor of Science in Mathematics

SECONDARY: Binangonan Catholic High School

1985 – 1989

PRIMARY: Darangan Elementary School

1979 – 1985

PERSONAL DATA:

Nationality: Filipino

Date of Birth: November 22, 1971

Place of Birth: Binangonan, Rizal

Sex: Male

Height: 5’ 8 1/2”

Religion: Roman Catholic

Status: Married

Spouse name: Glecy N.Onilongo

Address: #334 Kalawaan St.,Darangan, Binangonan, Rizal

Dependent: Ervin Jay N. Onilongo (Oct. 24, 1995)

John Wayne N. Onilongo (April 13, 1998)

Jenica N. Onilongo (Feb. 19, 2008)

By: EDWIN ONILONGO

Aluminum Welder

Contact this candidate