Don W. Bond

*** ****** **** ****

Carriere, MS **426

Email: act98s@r.postjobfree.com

Telephone: 601-***-****

WORK EXPERIENCE

August 14, 2015 Furmanite Inspection

January 10, 2016 API-653/650 Inspector

Inspector over New Construction of Tanks

Writing inspection reports and progress reports

Making Sure Tanks are built to Code requirements

New Tanks built in Reeves/Crane County, Texas

February 26, 2015 UP Professional Solutions, LLC

April 9, 2015 API-510/570/653 Inspector

Reviewed Inspector’s Reports in Meridium Software

Wrote work scopes for equipment

I approved reports to update RBI Software.

January 21, 2015 Intertek at Motiva Port Arthur, Texas

February 14, 2015 API-510 Inspector for Turnaround

I performed internal visuals on Exchanger

Components and exchanger shell’s.

I wrote reports and made recommendations for repairs.

September 23, 2014 Consulting & Field Services, LLC

October 20, 2014 Phillips 66 Wood River Refinery

API-510/API-570 Inspector for Turnaround

I performed external and internal visuals on equipment.

I inspected piping packages and inspected hydro’s.

Inspector over H-24 Heater in Crude Unit

I wrote repair plans for equipment that needed repairs.

June 2, 2014 LOLE’ LIMITED, LLC

June 27, 2014 Bridger Transport Services, Waskom, Texas

API-653 Senior Inspector

I was the contractor inspector for Bridger Transport Services for

The new Crude Tank being built at their Waskom, Texas facility

March 3, 2014 IRISNDT Matrix at Phillips 66 Refinery, Borger, TX

April 14, 2014 API-510/API-570 Inspector

Performed visuals on flanges and internal visuals on

Exchanger components in HF Alky Unit.

Wrote repair plans for all equipment inspected.

January 16, 2014 Furmanite America, Inc.

February 5, 2014 At Shell Martinez Refinery, Martinez, CA.

API-510 Senior Inspector for 3 weeks

Performed visuals on PSV’S as pulled condition

And installed. Walked down piping packages to make sure

Installed properly. Performed internal visual on a tank

And wrote repair plan.

October 7, 2013 Sentinel Integrity Solutions

October 23, 2013 At Marathon Refinery, Robinson, Ill.

Worked a 3 week turnaround performing

API-510 internal visual inspections.

Wrote repair plans for the equipment.

April 22, 2013- QualSpec (All Tech Inspection)

May 16, 2013 At Calumet Refinery, Superior, WS.

Worked a 4 week Turnaround performing

API-510 external and internal inspections.

Wrote repair plans for the equipment.

September 2012- Sentinel Integrity Solutions

January 2013 At CVR Energy Refinery, Coffeyville, KS.

Performed API-510/570 Inspections. Built Packages

With Ultra Pipe software. I went through P&ID’s to let

Know what piping was drawn and what was not drawn.

May 2005 – Turner Specialty Services, LLC

November 2011 At Cornerstone Chemical Co., Waggaman, LA

API 510 – External and Internal Visual Inspections

Recertified in January of 2008

Recertified in January of 2011

API 570 – Certified in December 2005

Recertified in January 2009

Six Year Recertification completed November-2011 for

January of 2012

Perform externals on piping and draw piping circuits.

Attended Mark Smith’s class for API 570

API 653 – Certified in September 2009

Attended Mark Smith’s class.

Perform external visual and internal visual inspections.

Performed T-min, corrosion rates and pressure calculations daily.

February 22 and 23 attended Mark Smith’s Technical Writing

Class

Level II UT, PT and MT and from time to time perform

Each of these inspections

Trained in Lloyd’s Register-Capstone Software for RBMI.

Risk base Mechanical Integrity Inspections

February 2003 - Petrochem Inspection

May 2005 Worked at Valero Refinery, Norco, LA

Level II UT, PT, MT

October 2004 to May 2005

Performed API 570 inspections

December 1, 2004 Became certified API 510 Inspector

April 2002 - Gulf Engineering Co., Inc.

January 2003 Worked at Chevron Refinery, Pascagoula, Ms.

Level II – Radiographer

Level II – Ultrasonics – Thickness-Flaw, Iris.

Level II – Eddy Current

Level II – Dye Penetrant

Level II – Magnetic Particle

Level II – Visual

Also do isometric drawings of piping systems, vessels and tanks

Performed API 570 inspections

November 2001 - Alliance for Affordable Services

April 2002 Sold Life, Health and Accident Insurance

July 2001 - Gulf Engineering Co., Inc.

November 2001 Worked at Dow Chemical, Harahan, La.

Level II – Radiographer

Level II – Ultrasonics – Thickness, Flaw, IRIS

Level II – Eddy Current – Went to Level II class for

40 hours at Hellier, Houston, TX and completed

Level II – Dye Penetrant

Level II – Magnetic Particle

April 1994 - Lockheed Martin Manned Space Systems

June 2001 New Orleans, La.

Level II – Radiographer – X-rayed welds and also read film

For acceptance or rejection of the weld.

Mil. Std. – 453 plus all in house specifications.

January 1991 - Avondale Shipyards, New Orleans, LA

April 1994 Quality Control Inspector NDT

Level II – Ultrasonic, Flaw

Level II – Magnetic Particle

Level II – Dye Penetrant

Level I – Radiographer

August 1990 - Hammond Construction, New Orleans, LA

January 1991 Carpenter – Duties included: carpentry work in

Commercial building.

May 1982 - Mason Chamberlain, Inc., MS Army Ammunition Plant,

August 1990 Stennis Space Center, MS

Mechanical Inspector – Duties included: Performing any

Type of quality inspection required at the plant. April 1985

Became a Level I Eddy Current NDT Operator

December 1989 was re-tested by A.S.N.T. Standards for

Three-year certification as a Level II – Eddy Current Operator.

Duties of Level II Operator included: calibrate equipment, verify

And set it up and to give a written report of test results.

May 1982 - 1987 became Level I – Ultrasonic NDT Operator.

August 1990 September 1989 became a Level II – Ultrasonic NDT Operator.

This is the emersion method. Duties of Level II Operator

Included: calibrate equipment, verify and set it up and give a

Written report of test results. Qualified in Liquid Dye Penetrant

NDT – 2 years.

Have 5 years experience in tooling inspection, including tooling

For different types of presses, bore machine and equipment of all

Types, from small tooling to real large tooling (tolerance allowed

On some tooling was only .0002). Used the XYZ Coordinate

Measuring Machine and Optical Compactor and all types of gages.

April 1977 - Executive Fund Life Insurance

May 1982 Salesman – Licensed in Mississippi, Louisiana and Alabama.

Traveled and sold all types of insurance policies and collected

On six month renewal accounts.

July 1975 - Audubon Construction Co., New Orleans, LA

April 1977 Carpenter – Duties included: carpentry work in commercial

Building.

September 1973 - Combined Insurance Co. of America

July 1975 Salesman – Sold policies and collected renewals. Sales

Manager for one year.

March 1972 - GAC Finance Corporation, New Orleans, LA

September 1973 Assistance Manager – Called on past due accounts by telephone

And also visited homes. Assisted in making loans.

EDUCATION Pearl River Central High School, Carriere, MS

May 1969 Graduate

Pearl River Junior College, Poplarville, MS

January 1971 – attended 1 years

TRAINING

Date Class

12/89 Eddy Current Level II

05/89 Fire Extinguisher

04/89 Ultrasonics Level II

12/87 Ultrasonics Level I

04/87 Hearing Conservation

04/87 General Safety Training

12/86 Hazardous Communication Training

12/86 Hearing Conservation

11/86 Eddy Current Level II

02/86 SPC I Basic Series

11/85 Forklift Operator Safety Training & OJT

07/85 Security Awareness Training

04/85 Restrike, O.D. Grind, Manual for 0061, Pierce

Deburr, Auto Final, Manual for 0080, Screening Room

06/84 Autogage

06/84 CPR

04/84 Pallet Jack

11/83 Weldon Hard Test

11/83 Hearing Conservation

08/83 Office Safety

02/83 Mech. Inspector Pre-Employment

Contact this candidate