Electrical Maintenance
Resume:
Steven C. Kelly
**** ******** ***. **********, **. 40215 502-***-**** (Cell) 502-***-**** (Home)
****************@*****.***
Summary
I have 26 years of experience as an Industrial Maintenance Electrician in industries including fabricated metal products. My experiences include troubleshooting, installing, maintaining, and performing preventive maintenance.
Most recently, I have been working as an Industrial Maintenance Electrician at Industrial Container Services from July 1989 to Nov. 2014.
My skills and experiences include: Layout Design and Install Electrical Control Circuitry, Design and Read Schematic Diagrams, Wiring 480 VAC /120 VAC Motor Controls and Components for Automation of Machinery and Conveyor Systems. Panel Fabricator, fabricating and wiring electrical circuit boards used to control machinery and equipment.
Experience
Maintenance Technician Volunteer Working 20 hours per week Dec. 2014 – Nov. 2015
Volunteer Work, Louisville, KY
Worked for family and friends doing various maintenance jobs
Industrial Maintenance Electrician Working 55 hours per week July 1989 – Nov. 2014
Industrial Container Services, Louisville, KY
Worked with a team of maintenance employees to share ideas on improvement methods in the process as well as designing of control boards
Experience building control boards with the ability to wire, read blueprints and schematics, and using hand and power tools
Installed and maintained 480vac 3phase, 240/120vac single phase, and low voltage AC/DC Circuitry; Allen Bradley, GE, Square D, Cutler-Hammer, Dayton, Reliance, ITE, Teleminique, Westinghouse, and Buss electrical equipment
Installed and repaired electrical equipment such as bus plugs, disconnects, transformers, switchboards, circuit breakers, overloads, fuses, controllers, motors, motor starter contact relays, PLCs, VFDs, E-STOPS, start/stop buttons, limit switches, photo eyes, proximity switches, relays, timers, heating units, conduit systems, fixtures, wall sockets, plugs, and switches
Performed preventive maintenance
Tested electrical circuits
Used test devices such as ohmmeters, voltmeters, amp meters, meggers, and test lamps
Planned layout and installation of electrical systems
Installed and connected wires to circuit breakers, transformers, outlets, electrical components, and electrical systems
Cleaned and maintained tools, machine parts, and electrical components
Operated equipment such as man lift, forklift, and cutting torch
Designed and implemented new electrical systems
Installed gearboxes, sprockets, chives, shear pins, conveyor chains, drive chains, belts, pulleys, gears, bearings, rollers, tensioners, and have experience in welding
My accomplishments included to take old container recondition machinery and equipment out and replace it with updated machinery and equipment with no plant production down time.
Electronic Equipment Installer & Tester Working 40 hours per week June 1984 – May 1989
Northern Telecom Incorporated, Raleigh, NC
Installed and ran troubleshooting tests on Digital Electronic Switching Gear used for Telecommunications
Panel Fabricator, fabricated and wired electrical and electronic circuit boards to control Digital Electronic Switching Gear used for Telecommunications
Worked with a team of installers sharing ideas on improvement methods in the process as well as designing electrical and electronic control boards
Experience building control boards with the ability to wire, read blueprints and schematics, and using hand and power tools
Installed components, units, subassemblies, wiring, and assembly casings
Inspected, tested, and troubleshoot wiring installation structures
Assembled electrical systems and support structures
Conducted repairs and replacements
Determined material requirements
Recognized parts and polarity by visual inspection
Used soldering irons, pliers, cutters of various types, wire strippers, and assembly tools
Checked and approved all equipment for proper operation before being put into use
My accomplishments included install and test equipment before the deadline date.
Electrician Working 40 hours per week Jan. 1983 – June 1984
H & C Electric Company, Louisville, KY
Installed and maintained electrical equipment
Installed and repaired electrical equipment such as generators, circuit breakers, motors, conduit systems, fixtures, wall sockets, plugs, and switches
Installed and connected wires to circuit breakers, outlets, electrical components and electrical systems
Cleaned and maintain tools
Complied with all local codes, NEC, OSHA safety procedures, EPA waste handling rules, and job specs
Experienced in Electrical Distribution Circuitry
Wore protective gear such as hard hat, safety glasses, boots, steel toe shoes, ear plugs, and safety vest
Able to use my own standard tools
Maintained neat and orderly work environment
Provided documentation such as daily reports and work orders
Used tools such as pipe threading machines, conduit benders, stripping tools, test meters, cable cutters, drill press, grinders, power and hand tools
My accomplishments included completed and passed inspection of jobs on time.
Apprentice Electrician Working 40 hours per week Feb. 1982 – Jan. 1983
Kelley Electric Company, New Albany, IN
Helped electricians
Performed semi-skilled electrical duties
Furnished electricians with materials, equipment, tools, and supplies
Cleaned work area and equipment Traced short circuits in wiring
Measured wire and conduit
Positioned and fastened objects such as wires and conduit
Maintained tools and equipment
Drilled holes for wiring
Led wire through openings
Applied tape or terminal caps to wires
Complied with all safety regulations
Apprentice Electrician Working 40 hours per week Mar. 1981 – Jan. 1982
H & H Electric Company, Louisville, KY Helped Electricians Furnished electricians with materials, equipment, tools, and supplies Traced short circuits in wiring Cleaned work area and equipment Positioned and fastened objects such as wires and conduit Maintained tools and equipment
Drilled holes for wiring Applied tape or terminal caps Used hand tools to tighten connections Stripped insulation from wire ends Complied with all safety regulations
Electrician Helper Working 40 hours per week July 1980 – Feb. 1981
Arrow Electric Company, Louisville, KY
Helped electricians
Furnished electricians with materials, equipment, tools, and supplies
Cleaned work area and equipment
Positioned and fastened objects such as wires and conduit
Maintained tools and equipment
Drilled holes for wiring
Led wire through openings
Applied tape or terminal caps to wires
Used hand tools to tighten connections
Stripped insulation from wire ends
Threaded conduit ends
Used tools such as conduit benders, screwdrivers, utility knives, crimping tools, wire cutters, and wire strippers
Military Service
Petty Officer Second Class Electrician Mate May 1975 - May 1980
United States Navy
Veteran Discharge: Honorable
Awarded: Battle “E” Ribbon
Skills
Forklift Operator, Layout Design Electrical Control Circuitry, Read Schematic Diagrams, Wiring of Electrical Control Circuitry, Materials Management, Repairing, Soldering, use Test Equipment, Cabling, Documentation, Operate Power Tools, Drill Presses, Drills, Saws, Grinders, Cutters, Use Hand Tools, NEC, Safety, Troubleshooting, Installing and Maintaining Equipment, and Preventive Maintenance
Education
Rets Electronic Institute June 1981 - June 1983
Associates Degree
Electronic Technology
GPA: 3.2
Ahrens Trade School Aug. 1973 - June 1974
Certificate
Industrial Electricity
GPA: 3.4
Iroquois High School Aug. 1970 – June 1974
Diploma
Advanced Mathematics
GPA: 3.6
Awarded: National Honor Role Society Member
References
(Maintenance Supervisor) Industrial Container Services
Jim Fields (co-worker/friend)
3613 Hunsinger Lane
Louisville, KY. 40220
(Customer Relations Specialist) Kentucky Manufacturing Career Center
Jodie Thomas (friend)
Airport Industrial Center
160 Rochester Drive
Building W, Suite 115B
Louisville, KY. 40214
502-***-****, Ext. 4001
(Career/Employment Specialist) Jewish Family & Career Services
Kendall Thirlwell (friend)
2821 Klempner Way
Louisville, KY. 40205
502-***-****, Ext. 236
(Electric Meter Technician) LG&E-KU
Thomas Mohl (friend)
5432 Southview Drive
Louisville, KY. 40214
Contact this candidate