Oil & Gas Maintenance Control

C U R R I C U L U M V I T A E

OF

ARNOLFO D. CAOENG

Career Objective: To find a challenging job suitable to my position capabilities, competencies, education, skills and experiences.

I have 18 years of working experienced and specialization for the construction, installation of equipment, operations and maintenance on Onshore / Offshore Oil & Gas processing plant. Involved in commissioning, start-up, Operations and Maintenance from various fields, equipment and machineries such as Floating Production Storage and Offloading (FPSO), Oil Production Rig Platform, Subsea Wellhead / Christmas Tree, DCS / SCADA control system operations, Upstream / Downstream Oil & Gas Production Platform, Well testing, Three Phase Separation, Gas Processing, (Centrifugal and Reciprocal Gas compression), Gas Lifting, and Gas Injection, TEG Glycol Regeneration, Heat Exchanger, Hydro Cyclone, Water Flooding Operation and Power Generation Plant.

Position Applied For: 1. Production Operator and Maintenance

2. Control Room Operator

3. Electrical and Instrument Technician

Personal Information:

Name: Arnolfo D. Caoeng

Nationality: FilipinoError! Bookmark not defined.

Height: 161 cm

Weight: 58 kg

Date of Birth: February 19, 1954

Marital Status: Married

Residence: Lot 20, Block 06, Phase 06-A, Tierra Nevada, San Francisco,

General Trias, Cavite, Philippines 4107

Telephone: +63-465******

Mobile: +63-927*******

Email: **************@*****.***

Availability: ASAP

Passport No: EB6432817

Seaman Book No: B0614069

HUET (OPITO): 190775/08

Computer Literacy: MS Word and Excel

Education

06/1974 – 05/1977 FEATI University – Bachelor of Science in Electrical Engineering

Sta. Cruz, Manila, Philippines

06/1967 to 04/ 1971 San Gabriel Academy (Secondary– High School)-San Gabriel, La Union, Philippines

Training / Seminars

Nov 08, 2010 Safe Start and Right Start Training

Weatherford Asia Pacific Pte. Ltd. Phil. Makati City, Philippines

April 02, 2008 Helicopter Underwater Escape Training (HUET -OPITO)

Consolidated Training Systems, Inc., Philippines

August 16, 2006 DuPont(STOP) Safety Training Observation Program for Supervisory Level FPSO Ocean Producer Canuku Field Angola Africa

Aug. 02-20, 2004 Industrial Process Controls (Diploma /Certificate)

Meralco Foundation Institute, Pasig City, Manila, Philippines

July 12 – 30, 2004 Calibration of Process Instrumentation (Diploma / Certificate) Meralco Foundation Institute, Pasig City, Manila, Philippines

October 08, 2003 DuPont Stop Training Observation Program (STOP)

FPSO Ocean Producer, Angola Africa

December 12, 2002 Anti- Surge Protection for Solar Gas Turbine and HP

Gas Compressor system. CCC Anti-Surge Controller

Belema Gas Injection Plant, Port Harcourt, Nigeria, Africa

September 01-07, 2000 Operator Training Course for Electrically Driven

Sub Sea Multiphase Booster Pumps

Framo Engineering AS / Exxon Mobil,

FPSO, Zafiro Producer, Malabo, Equatorial Guinea, Africa

September 17–23, 2000 Solar Gas Turbine Technical Trainining

Mars Compression & Taurus Generator, 6-Day O.J.T. Course

Exxon Mobil FPSO Zafiro Producer

Malabo, Equatorial Guinea, West Africa

August 23-25, 1999 Offshore Survival Course

Water Survival, First Aid, Basic Firefighting/ Orientation

Mobil Equatorial Guinea Inc., Malabo, Africa

May 15-17, 1997 Safety Seminar on H2S, LEL, and Fire Fighting

Maersk Oil Qatar AS Al Shaheen Field, Doha, Qatar

May 27, 1996 Offshore Rig Safety Orientation

Oil Well Drilling Technology, Manila, Philippines

November 09, 1991 Instrumentation, Electrical Power Distribution, Controls and Protection

Asahi Instrument Industries Co. Ltd., Abu Dhabi, U.A.E.

SKILLS & EXPERTISE

OIL & GAS PROCESS OPERATION & MAINTENANCE:

* Involved in many projects and modifications to the process plant and equipment, and played as a team member in the implementation, construction, installation, trouble shooting and repair, pre-commissioning, commissioning, start-up, operations and maintenance.

* Trained in all aspects for the operations and maintenance on onshore / offshore oil & gas processing plant such as well heads, 3 phase separation, hydro cyclone, water injection and flooding, gas lifting, gas injection, gas compression reciprocating and centrifugal, teg regeneration, gas dehydration, heat exchangers, numerous safety systems, and different utilities to facilitate the process system.

* Well experience in the operation and maintenance of DCS, SCADA, PLC, Panel Boards and Local Control Panels.

* Work as part of a team in the daily operations and maintenance of the production system to ensure the facilities operated and maintained in compliance with company processes.

* Trained and worked at all levels from production operator through control room and lead to stand in supervisor, and have a good knowledge on trip sequences and process fault finding.

* Carry out responsibilities for the safe operating condition of the plant and machineries ensuring safe from accident and trouble free plant operations.

* Reviews completed work, checks, ensures that all work orders and checklists are completed with actual man-hours taken, and materials used. All jobs in progress and completed are log on.

* Reports and write down daily completed works on the log book and performed complete well tests / morning reports and daily chemical consumable reports and ensure proper handover during change shift.

* Ensure compliance to all relevant safety, quality and environmental management policies, procedures.

* Perform preventive / corrective maintenance and familiar in HSSE and SIMOPS application and procedures.

* Providing timely advice and information to the commissioning Technicians and in-charge of Permit to Work Systems and also participation in HSE walked around as required.

* Performed Pre-Commissioning / Process controls System / Metering System / Vibration monitoring system and various Fire and Gas /ESD System.

* Comply with all company Health, Security, Safety and Environment as well as permit to work (PTW), lock out / tag out policies and procedures.

* Carry out dismantling, cleaning, greasing of flanges and valves overhauling and performed hot bolts.

* Carried out low and high pressure hydro leak testing on pipe lines.

INSTRUMENTATION:

* Competent in fluid power technology, AC/DC circuits and electro-mechanical devices.

* Ability to read and interpret blueprints, electrical power and control diagrams, pneumatic and hydraulic control drawings, parts lists and follows maintenance procedure in compliance with maintenance practices.

* Read analyzed and interprets Process and Instrument Drawing.

* Repair, calibration and installation of industrial and process instrument control system.

* Involved in the Production Train Commissioning and Start-up. Performed operation and maintenance on wellhead control panel, local control panel and control room.

* Proficient in using a variety of pneumatic, hydraulic, and electrical hand tools for hook up, installations, simulation, calibration, troubleshooting, repair, testing and measurement equipment for the specific jobs.

* Calibration of various process variable field instrumentation from primary, secondary, measuring, controlling and final controlling elements including Smart – Hart family and analyzers electronic / pneumatic transmitters (level / flow / pressure) and various control valves and its action.

* Performs and supervises a variety of skilled works related to operation, installation, troubleshooting and calibration of various instruments needed for the process plant; and have a good knowledge to identify and selects the correct application of spare parts and engineering materials.

* Carried out documentation job of all instruments and equipment in regards to its calibration details and report for proper filing and future reference.

* Performed Pre-Commissioning / Process controls System / Metering System / Vibration monitoring system and Various Fire and Gas System.

* Performed punch lists jobs as per as built drawings.

* Familiar in the correct identification, use and where possible reclamation of spare parts and materials.

* Maintain an adequate supply of spares in order to fulfill maintenance requirements and facilitate a safe and efficient operation.

* Carries out a range of other similar or related duties and performs Emergency Response Role as required.

* Supporting/ Participating in Emergency Drills and Exercises as required.

* Maintain and improve housekeeping in all areas.

ELECTRICAL:

* Carry out general industrial and domestic electrical installation work.

* Review and check of all necessary tools / equipment prior to all installations, construction, trouble shooting and repairs.

* Worked as a team in the construction, installation, termination of control cables and control system on Toshiba 145kv Gas Insulated Switch Gear (GIS).

* Carry out preventive and routine maintenance in the plant operation a variety of technical repair works in the workshop and on location of malfunctioning electrical equipment.

* Carried out installation, maintenance and trouble shooting of various electrical motor controllers.

* Carried out calibration of overload relays, and fault diagnostic on electrical controls.

* Carried out installation of panel board and circuit breakers, relays and all electrical equipment.

* Carried out installation of ex cable glands and intrinsically safe equipment for hazardous area and termination of power and control multi core cables.

Job Description:

01 Apr 2010 - June 06, 2013: Weatherford Asia Pacific Pte. Ltd. Phil. Branch

146 Valero St., Salcedo Village, Makati City 1227, Philippines

Position Held: Sr. Well test Production Operator / Elect. & Instrument Technician

* Assigned in Kalasin, Thailand, Rig MB Century, Onshore TEW-E drilling site.

* Worked as part of a team in rigging up all Manage Pressure Drilling and Under Balance Drilling (MPD / UBD) well test equipment for the Gas Drilling Plant such as installation of piping, valves, and hydraulic hoses, electrical power supply cables, and hooked up instruments and sensor cables for Data Pro Acquisition System.

* Assigned in Offshore Jack Up Rig (Process Department), Aqua Marine Drilling Rig, Nido Petroleum, Palawan, Philippines.

* Participate in the commissioning / start up and normal operation and maintenance in the process area, ensuring that conditions and restriction is strictly adhered to at all times.

* Hooked up SS tubing, fittings and devices for LP / HP wellhead hydraulic supply and fusible loop fire and gas system.

* Carried out dismantling and replacement of different sizes of fixed choke on the choke manifold and operates X’mas tree valves during work over and completion, coil tubing, acidizing, N2 injection and pressurising operations.

10 Nov 2002 - 13 Oct 2009: Oilfield Production Support (North Sea) Ltd. Sonangol De Producao / Oceaneering International: FPSO MV Ocean Producer, Canuku Field – Offshore Luanda, Angola, Africa

Position Held: Lead Process Operator

08 Sep 2006 – Oct 2009 - Designated as Lead Process Operator and Maintenance

* Carry out responsibilities in the operations and maintenance policies which include training local operators, directing works and maintaining production process and efficiency improvements needed as per instruction of the process Superintendent.

* In charge in the plant operation and maintenance for safe operating condition at all units.

* Lead technicians in a work group / or team for the safe operation and maintenance of the plant and machineries as per company standards and procedures.

* Carry out faultfinding maintenance and modification in compliance with production operating procedures and company’s safety management system.

* Manages any process deviation or abnormality and attain normal parameters.

* Anticipate problems that may arise and do the necessary countermeasure in compliance with company’s Safety Management System.

* Influence and encouraged operators to attend tool box talks and safety meetings for the plant operations and maintenance as per company standard and procedures.

* Encourages, motivates, and assists Angolan nationals (Sonangol) for the safe operation and maintenance on three-phase oil & gas production processing plant as per JSEA standard.

* Signed work permits, and follow locked out / tag out adherence to safety regulations and procedures.

* Ensure proper handover during change shift.

02 Oct 2004 – 2006 - Designated as Instrument Technician

* Familiar in the interpretation and trouble shooting of hydraulic, pneumatic, and electrical control drawings.

* Read / understand and analyze the P&ID’s, loop sheets, cause and effects and schematic control drawings.

* Proficient in the use of measurement gauging equipment and handling tools on instruments processes for installation, loop checking, simulation and calibration on process variable equipment such as flow, level, pressure, dp pressure and temperature parameters by using hart 375 hand held communicator, fluke multi meter, RTD sensors PT 100, I/P 4-20mA input, 3-15psi output converters and P/I 3-15psi input, 4-20mA output converters, pneumatic / hydraulic pump calibrator, dead weight calibrator, druck calibrator and Wallace & Tiernan calibrator.

* Carry out overhauling of valves and bonnet assembly on LCV, PCV, FCV, PSV and ESDV.

* Carry out overhauling and calibration of process equipment such as Daniel Orifice, Halliburton (Nuflo) flow meters, Fischer Rosemount transmitters, level, flow and pressure controllers, relief valves, chemical injection (Williams) pumps and repair of wilden pumps.

* Well experienced in lay outing, installations and hook up of pneumatic and hydraulic tubing and instrument devices.

* Troubleshoot, test, assemble, disassemble pneumatic, hydraulic and electrical equipment and perform visual inspection of electro-mechanical assemblies.

* Configure test and evaluate the performance, and if required, repair general purpose test equipment.

* Carry out a program of daily routine and monthly preventive and corrective maintenance on all process and ancillary equipment, instruments safety process including complex trip test and function testing of control loops, and well verse on trip sequence and process faultfinding.

* Carry out monthly safety equipment checks on process safety panel, ESD, master control panel, LP / HP wellhead control panel, level alarm, pre-alarms and process shutdown instruments.

* Familiar in the operation and maintenance on PLC GE Fanuc Allen Bradley automation and Murphy Panel Control system. Logic drawings interpretation and fault rectification.

10 Nov 20002 – Oct 2004 Hired as Production Shift Operator

* Familiar on SOP start-up and back online operation on Three Phase Oil and Gas downstream Process System, Power Generation, Heat Exchanger, Gas Lift Compressor, Water injection and Water flooding system.

* Performed laboratory analysis and calibrate chemical injection pumps at specific rate.

* Performed and complete well tests / morning reports and daily chemical consumable reports.

* Comply with all company Health, Safety and Environment as well as work permit, policies and procedures.

* Monitors / check the system continuously to ensure steady process conditions.

* Monitor and analyze process line variables and make necessary adjustments as required in accordance with safety procedures.

* Perform function testing on well safety equipment and leak testing, hydro testing.

* Perform hot bolts and maintain safety awareness and housekeeping procedures.

15 Oct. 2001 - 30 Oct 2002: GTMH (Foraid Nigeria)

Assigned: Belema Gas Injection Plant, Shell Petroleum Development Corp. (SPDC)

Onshore, Port Harcourt, Nigeria, Africa

Position Held: Control Room Operator promoted to Gas Plant Supervisor

* Participate in the pre-commissioning / commissioning, start-up and normal operation on Belema Gas Injection Plant.

* Carried out operation of DCS Foxboro (I/A) Intelligent Automation Series System for process operation, and Fire & Gas, ESD / OSD system.

* Carried out pre commissioning / commissioning, start-up and Operation on HP / LP suction scrubber, LP booster Ariel Waukesha Gas compressor, 1st, 2nd and 3rd stage HP centrifugal gas compressor system( driven by Solar Mars T-100 Gas Turbine), Glycol Regeneration Package, Gas Turbine Generators and instrument air compressors. Carried out pig launcher and performed hydro testing on pipeline.

* Attend the process control room to monitor and control the process by inspecting and checking DCS, adjusting set point controller as per instruction to give optimum operating conditions.

* Monitor the process thru the computer screen on the DCS and note down in the log all the abnormal process upsets, and perform Cause & Effect (Logic Testing) on Process Utilities and F&G / ESD system. Review alarm history and trends.

* Analyze / study daily plant performance and highlights abnormalities, suggests corrective actions to my Superintendent.

* Take direct job orders from Superintendent and implement toolbox talk whatever the necessary adjustment or jobs to carry out.

* Establish safe working procedures for all areas of operation in coordination with the safety department and ensure its implementation to keep accident to zero or a minimum and reduce downtime.

* Participates and maintain overall emergency training and procedures.

* Ensure proper training of plant personnel to upgrade their professional skills and maintain the equipped level of quality standards to achieve the company’s standards on safe operations and maintenance.

* Assists, encourage and lead SPDC nationals (trainee staff) for the standard operating procedure on Gas Compression / Injection and Glycol Regeneration.

* Comply with all company Health, Safety and Environment as well as work permit, policies and procedures.

22 Jan 1999 - 03 Jun 2001: Oilfield Production Support (North Sea) Ltd

Assigned: Offshore – FPSO “M.V. Zafiro Producer, EXXON MOBIL Corp. Equatorial Guinea, Malabo, Africa.

Position Held: Production Shift Operator

* Assigned as a Shift Operator in the operation of both train 1 and train 2 separators which consists of slug catchers, production separators, crude exchangers / heaters and electrostatic treater, desalter, gas scrubber, hydro cyclone, and corrugated plate interceptor.

* Attend toolbox talk before any job started; and get direct orders from Lead Operator and see to it that the job assigned to me was properly done.

* Monitors process variables on site. Carry out adjusting local set points as required ensuring steady state process condition.

* Reports to the lead operator any equipment abnormalities and unsafe condition observed in the process plant.

* Records flow line pressure / temperature, well head pressure/temperature, bottom hole pressure/temperature, casing pressure/temperature, and export line flow meter.

* Participates in pig launcher / receiver operations.

* Monitor / checked and calibrates chemical injection at specific rates.

* Performed laboratory analysis as required in an efficient and timely manner.

* Performed and complete well tests / morning reports and daily chemical consumable reports.

22 Feb 1997 – 08 Aug 1998: IPEDEX PRODUCTION LLC.

Assignment: Offshore – Rig Muna, MAERSK OIL QATAR AS, Manshall Offshore W.L.L

Al Shaheen Field, P.O. Box 1310 Doha, Qatar Arabian Gulf

Position Held: Production Operator

* Familiar in the operation of process control system, GE Fanuc 90-30 series PLC to perform the control and monitoring of the field process equipment. Read analyzed and interprets Process and Instrument Drawing.

* Familiar in the operation of production separators, bean-up procedure for all wells, normal start-up on Test separator, HP separator, LP separator, closed drain drum, wellhead control panel, and export pumps.

* Operate pressure vessels and other production / process equipment. Records flow line pressure / temperature, wellhead pressure / temperature, bottom hole pressure / temperature, casing pressure, and export line flow meter.

* Assure all sample results are on specification.

* Monitor, check PCV’s, LCV's to ensure it has opened the same percent as on the DCS.

* Assists and coordinate instrument technicians, mechanical technicians about repairs / replacement as per instruction from the Supervisor.

* Performed and maintain safety awareness and housekeeping procedure.

09 Nov 1991 - 15 Jan 1995: ASAHI INSTRUMENT IND. CO. Ltd. Abu Dhabi, U.A.E.

Main Scope of Activity: Services company for Oil & Gas company clients.

Various Field Assignments:

*Bunduq Japan Oil Co. - Offshore Abu Dhabi U.A.E

*Abu Dhabi Marine Operating Co. (ADMA OPCO) - Offshore Abu Dhabi U.A.E

*GASCO (ABU DHABI (NGL) Co. - (GASCO) Onshore Asab Abu Dhabi, U.A.E.

Position Held: Electrical / Instrument Technician:

* Involved in the Production Train Commissioning and Start-up. Repair, calibration and installation of industrial and process instrument control system. Read analyzed and interprets Process and Instrument Drawing.

* Participate in the pre-commissioning / commissioning, loop checking, simulation, installation of various pneumatic, electrical, and electronics oilfield instrument and equipment such as panel boards, controllers, transmitters, I/P transducer /control valves positioner, orifice plates, wellhead control panel and 6KV MOL pumps.

* Lead the installation of cable glands and terminations of multi core control cables on Toshiba Gas Insulation Switchgear (GIS).

* Involved in the installation and commissioning of Honeywell TDC 1000 controller.

* Carried out installation, hook-up stainless steel tubing, cable pulling, glandings and terminations of electrical power supply and control cables.

* Carry out a program of preventive maintenance on all process and ancillary equipment, instruments safety process.

* Inspect, clean, verify functions, calibrates and repair process variables instrument controllers, differential pressure transmitters, flow meters, flow chart recorders, level switches, pressure switches, pressure safety valves, control valves and chemical injection pumps.

* Familiar in using tools for calibration on process variable equipment such as hand held communicator, multi meter, pneumatic / hydraulic pump calibrator, dead weight calibrator, and Wallace & Tiernan calibrator.

* Installing, calibrating, maintaining, testing, troubleshooting, tuning and repairing electro-mechanical equipment and controls. Loop descriptions and drawings, instrument installation, simulation and calibration.

* Assists / coordinates production operators in their daily tasks.

Contact this candidate