Maintenance Electrical
Resume:
Lorain, Ohio *****
Home 440-***-****
Cell 440-***-****
Dennis J. Anderson
Education
[1984-1991] E.T.I Technical College Cleveland, Ohio
Electronic Engineering/Management
Associate Electronic Engineering Technology (AEET) 1991
oElectronics G.P.A: 2.7
oManagement G.P.A: 3.0
oAcademic G.P.A: 2.9
Work Experience
[8/2012-Present] Riddell All-American Sports Corp. Elyria, Ohio
Maintenance Lead
Responsible for the day-today operation of the Maintenance Department, directing maintenance technicians in their assignments and projects.
Reporting to Supervisory personnel.
Created PM forms and PM procedural guidelines for all production and support equipment.
Created, implemented, and maintains PM program for all production, air supply/handling equipment, and fleet vehicles.
Responsible for the keeping of all Maintenance Department records, including PM, 5S, and general machine and machine repair data matrix.
Perform preventative maintenance on all production and support equipment. .
Troubleshooting and repairing of electronic, electrical,
mechanical, pneumatic, and/or hydraulic breakdowns or
problems with production equipment and all general plant fixtures.
Wiring/rewiring machines and their controls, adding safety
circuit upgrades, performance enhancing accessories etc.
Installing equipment such as large industrial washing machines (Washex), Laundry chemical pump/ distribution systems, ozone treatment systems, ventilation equipment etc.
Implementing 5S and lean 6 sigma guidelines and procedures as directed by Facilities Engineer and plant Management
.
Cataloging, inventorying, and organizing maintenance
stock.
Installation of electrical circuits, distribution, breaker, and/or control panels.
Trained in apprentice rigging at Lorain County JVS (2013)
[8/2009-6/2011] Accutech Films Elyria, Ohio
Maintenance Electrician
Troubleshooting and repairing of electronic, electrical,
mechanical, pneumatic, and/or hydraulic breakdowns or
problems with plastic extrusion equipment ( Davis
Standard, Gloucester, and Sterling extruders), and related
Production machinery.
Troubleshooting and repairing bag making equipment such
as Gloucester 418 Bag Sealing/Perforating machines, Bag
Separating machines, Ro Ann Bag machines and Wicketers.
Created PM forms and PM procedural guidelines for most of
the extrusion production equipment.
Wiring/rewiring machines and their controls, adding safety
circuit upgrades, performance enhancing accessories etc.
Installing equipment such as Extruders, AEC Whitlock resin
pump systems, ozone removal systems, ventilation
equipment.
Cataloging, inventorying, and organizing maintenance
stock.
Perform preventative maintenance on all production and
Support equipment.
[2006-10/2008] Western Enterprises Avon Lake, Ohio
Head of CNC Maintenance
Troubleshooting and repair of all electronic, electrical, mechanical,
pneumatic, and/or hydraulic breakdowns or problems with Traub,
Maier, Tornos, Tsugami, Mori Seiki, Haas, Miyano, Kiwa, Makino,
and Takisawa CNC production lathes and mills..
Responsible for the acquisition and maintenance of all replacement
parts, tools, and equipment for CNC Department, as well as organizing
and maintaining a sufficient inventory of replacement parts.
Responsible for communicating with machine manufacturers,
distributors, and technical support personnel in all matters of CNC
repair, service calls, and parts purchasing.
Responsible for the creation and implementation of an ISO
preventative maintenance schedule, standardized forms, and
maintaining pm schedule and records of all work completed.
Assist Automation Department with panel building for in house
constructed test equipment.
Responsible for interacting in cooperation with scheduling department
in matters of machine availability, and estimating delay and down
times due to breakdown or for preventative maintenance.
Responsible for maintaining a good working relationship with
departmental supervisory personnel in order to facilitate smooth
operation of production.
Also consult with production engineering in matters of NEC
compliance, and safety throughout the plant.
[2005-2006] Diamond Products Co. Elyria, Ohio
Maintenance Technician
Troubleshooting electrical, mechanical, pneumatic, or hydraulic
breakdowns or problems with various types of production equipment
and machines and making prompt repairs.
Troubleshoot and repair building and facility problems such as HVAC,
plumbing, painting, and noise reduction.
Installation of new or rebuilt equipment, and removal of old or
damaged equipment.
Repair and maintenance of shop equipment from Cushman carts to
hand tools.
Performing routine preventative maintenance tasks in accordance with
implemented preventative maintenance program.
Organizing stock and tool rooms to facilitate parts and tool retrieval,
and procurement of more stock.
Installation of conduit, both EMT and rigid.
Cutting, marking, and pulling of wire harnesses.
Fabrication of specialty parts, mountings, and shipping pallets.
Use of all types of shop tools, from hand, electric, or pneumatic tools
to lathes, Bridgeports, and man lifts.
Work along with and support production in order to keep production at
a maximum level and provide for a safe and ergonomic workplace.
[2001-2003] Mid West Forge Cleveland, Ohio
Journeyman Electrician/Millwright (Maintenance Department)
Troubleshooting various types of machine breakdowns and problems
such as electrical, mechanical, hydraulic, or pneumatic, and make
prompt repairs.
Assigned to Rotoblaster department, where I was responsible for
keeping all lines, machines, and cranes in running order as well as all
repairs, preventative maintenance checks, and reporting
mechanical/electrical status of department to department supervisory
personnel.
Bending, cutting, threading, and installation of both E.M.T and rigid
conduit.
Cutting, bundling, labeling, and pulling of wire harnesses into conduit
and raceways, as well as making final connections to field devices and
panels.
Responsible for all preventative maintenance and/or safety checks of
hoists, crane cables, lift beams, lift chain chains/ slings, and Caddy
lifts in plant.
Trained at Rockwell International Training Facility in Euclid, Ohio in
troubleshooting, and correcting PLC problems using RSLogix
software.
Highly experienced in the use of hand tools, pneumatic tools, power
tools, tow motors, man lifts, pipe threaders, hydraulic jacks, lathes, and
mills, all electrical troubleshooting tools and meters, and many other
various maintenance and production tools and machinery.
Performed preventative maintenance checks on production equipment,
and filling out the appropriate paper work.
[1998 – 2001] Arnco Corporation Elyria, Ohio
Industrial Maintenance Electrician
Responsible for troubleshooting electrical problems throughout the facility.
Design, layout, build, and wire control panels.
Install and wire controls to machines.
Repair and rebuild AC and DC drives such as Fincor, KB, Reliance, and Mototronics controllers
.
Troubleshooting drive faults and failures.
Performed electro-mechanical repairs of many various types of production machinery.
Responsible for the ordering and inventory of heater bands and all electrical supplies.
Aided and assisted regular and shift maintenance team members in their efforts to keep production moving forward.
[1997 – 1998 ] General Casting Company Grafton, Ohio
Chipper / Grinder
Use pneumatic tools, such as grinders and chipping hammers to remove excess iron from castings in order to facilitate machining.
Operate overhead cranes to move castings into or out of work areas.
Assist in the training of temporary and newly hired workers in the practices, procedures, and safety requirements of the occupation.
Assist in the repair of tools and equipment.
[1995 – 1997 ] Husqvarna, Viking, and White Cleveland, Ohio
Service Technician
Repair and service both mechanical and computerized sewing and
serging machines.
Refurbishing dealer returns.
Checking the performance, noise level, and stitch quality of all new
incoming machines.
Filling out quality reports, and determining if machines should be sent
on or held for further testing.
Answering customer telephone inquiries.
Troubleshooting and repairing customer machines sent in for repair.
Train new and temporary employees.
Assist other departments during manpower shortages.
Filling out repair reports.
Parts retrieval.
Interests
Coaching CYO Football, Kenpo Karate, Golf, Tennis, and Bowling.
References
References upon request
Contact this candidate