Training Machine
Resume:
Francolito de la Paz Alelojo
#** *. ****** **., ****** Quezon Hill, Baguio City
e-mail: **************@*****.***
Tel. No: (Home) (637*-***-****
Office: (637*-***-**** to 55
Cellphone Number : +639*********
Objectives:
To use my skills to the fullest and adapt to new trends and information needed to fulfill my duties and responsibilities to help the company I’m working for, achieve their desired results for their products and services.
Work Experience:
Team Leader I, Quality Inspection
MOOG Controls Corporation, Philippine Branch
Baguio Economic Zone
Loakan Road, Baguio City
September 15, 2015 to Present
Duties and responsibilities:
-Performs Quality Inspection duties.
-Responsible for day to day shift operations of the Quality Inspection Department.
-Manage the Quality Inspection Department by training, developing and administering company personnel policies fairly and consistently.
-Distribute and schedule workload among inspectors based on experience/expertise levels.
-Ensure compliance with scheduled demands of 4 segments.
-Create department metrics (i.e. backlog, average hrs/lots and days in inspection) which will be submitted to Area Managers and Quality Manager.
-Mitigate on issues that could impact Moog Baguio operations.
Quality Inspector (for Machined Metal Parts such as Gears, Cylinder & Pistons, Components and Prismatics parts)
MOOG Controls Corporation, Philippine Branch
Baguio Economic Zone
Loakan Road, Baguio City
February 2012 to September 15, 2015
Duties and Responsibilities
-Being the senior in our area I:
-Creates and implement schedules for the other Quality Inspectors in the area
-Manage the workload that comes in the area.
-Designates the work to be done by each Quality Inspector.
-Communicates with Managers, Cluster Leads and Planners for part status.
-Creates reports to reflect weekly loads.
-Perform a wide variety of mechanical /visual inspection on internal machined parts, in-process and finished machined parts using precision measuring instruments such as comparators, micro-hite and height masters, micrometers, calipers, pin gages, microscope, thread and bore gages, surface analyzer, dial and test indicators and coordinate measuring machine (CMM) as required, to verify compliance on dimensions given and other requirements such as surface finish, concentricity, angularity, perpendicularity, parallelism, circularity and position. Work involves simple to complex set-ups to make measurement easier and faster.
-Perform First Article Inspection. Works from approved inspection plans, engineering drawings, operation sheets. Approve by stamping and / or reject work failing specifications. Detect errors on drawings and thus inform superior about it. Initiate a non-conforming report for parts not meeting requirements or specifications.
-Perform in-process inspection – inspect parts that have new process added to piece parts.
-Perform containment inspection – perform 100% inspection on all the parts with the same part numbers that failed First Article Inspection and in-process inspection.
-Perform First Piece Inspection – inspect new in process parts or new machine programs per operation to qualify the process and buy out the process. In case parts would fail. Indicate part not to print and inform operators to adjustment that needs to be made for the piece part.
-Prepare Gage Package – create a list for gages and programs that will be used to inspect piece parts.
- Run Zeiss(Coordinate Measuring Machine) Calibration and programs.
-Run and create Schneider (Coordinate Measuring Machine) programs using Saphir software and perform calibration.
-Create inspection programs using Calypso and Gear Pro Software for Zeiss(CMM).
Test Technician II
MOOG Controls Corporation, Philippine Branch
Baguio Economic Zone
Loakan Road, Baguio City
January 2010 – February 2012
Duties and Responsibilities:
- Performs various precision assembly and test operations on hydraulic, pneumatic, and electromechanical valves, actuators and systems. Assembly activity utilizes a variety of mechanical measuring equipment such as dial indicators, calipers and precision micrometers to obtain proper build requirements. Test activity requires the use of hydraulic and electronic test equipment, fixtures and tools.
- Maintains dimensional accuracy on assemblies through the use of torque wrenches, fixtures, toolings and gauging.
- Works from assembly drawings, worksheets, parts lists, test specifications, and other instructions, both written and oral.
- Diagnoses test failures and perform necessary rework in order that the unit will pass test requirements.
- Cleans components to required cleanliness levels.
- Positively contribute to the teamwork environment in terms of productivity, initiative, cooperation, data collection and attitude.
- Assemble connectors manually according to blue prints following worksheets and operation sheet instructions.
- Install electrical connectors and test for resistance and continuity.
- Perform grinding operations to achieve piece parts size using grinding machine.
- Bearing installations
- Shrink fit parts using Liquid Nitrogen or Dry Ice.
- Perform swaging operations using Makino milling machine.
- Install Lee plugs and Helicoils.
- Perform Lee plug and helicoil extractions for rework purposes using drilling and tapping tools.
- Perform bearing extractions for rework purposes using manual or hydraulic press.
- Perform drilling and reaming operations using drilling machines.
- Install connectors in manifolds and apply rubberized potting solutions for the protection of connector wires inside the manifold following worksheet and operation sheet instructions.
- Use basic hand and power tools and cleaning tools and cleaning machines.
- Detect Visually defects like toolmarks on lee plugging brazing defects like blister, unmelted alloy, unwanted erosion on pinholes.
- Perform deburring operations for part reworks.
- Solve problems and plan workflow in a team.
- Perform visual inspections and manual inspections using various gages or aparatus.
CMM(Coordinate Measuring Machine) Technician
MOOG Controls Corporation, Philippine Branch
Baguio Economic Zone
Loakan Road, Baguio City
August 2008 – January 2010
Duties and Responsibilities:
Run CMM Programs on 3 Zeiss Machines(Carl Zeiss PRISMO, Carl Zeiss PRISMO Navigator and Carl Zeiss PRISMO Navigator MASS(Multi Application Sensor System))using UMESS and Calypso programs. Occasional back-ups to (5) other CMM Machines located in the company.
Understand CMM Program set-up and procedures.
Uses wide variety of mechanical inspection on machined parts using precision measuring instruments such as comparators, micro-hite and height masters, micrometers, calipers, pin gages, microscope, thread and bore gages, surface analyzer, hardness tester, dial and test indicators and coordinate measuring machine (CMM) as required, to verify compliance on dimensions given and other requirements such as surface finish, concentricity, angularity, perpendicularity, parallelism, circularity and position. Work involves simple to complex set-ups to make measurement easier and faster of piece parts with respect to given blueprints, sketch sheets and operation sheets.
Create inspection programs for easy inspection using UMESS or Calypso Program. Maintain working knowledge of personal computer software packages such as Excel and Word.
Set-up Probe Locations and specifications.
Maintain calibration, maintenance schedules and activities to ensure proper operation of CMM equipment, sometimes running CMM programs on multiple CMM’s in order to facilitate inspections and optimize throughput.
Assure compatibility and correlation of CMM programs with engineering drawings, operation sheets, specifications, sketches and/or written inspection plans. Review applicable documents for compatibility and accuracy.
Perform 1st piece and/or 100% inspection on machined parts, checking all dimensions, angles, radii, contours, bores, surface finish and concentricity to close and exacting tolerances.
Resolve problems with part inspection programs and prove out these programs by verifying inspection results with conventional inspection methods while performing basic trouble shooting and problem solving activities related to the CMM including identification of machine malfunctions.
Identify nonconforming in-process parts through review and analysis of remaining operations and help coordinate corrective action activities. Inspect parts following job setup, operator, and machine tooling changes avoiding extensive rework or scrapping the entire order.
Detect unusual conditions, defective and deviate parts, as well as recognize errors in blueprints and operation sheets and providing information about necessary process corrections to others which is necessary to avoid recurrence of problems related to CMM and Manufacturing operations. Propose preventative actions necessary to avoid recurrence of problems on complex, long-term jobs.
Develop, maintain, and perform calibration and confidence programs, and maintenance schedules to ensure CMM operation to manufacturers specifications.
Perform basic trouble shooting and problem solving activities related to the CMM including identification of machine malfunctions.
Keep CMM programmers updated for program irregularities and updates according to blueprints.
Created simple programs using macros in Microsoft Excel for the fast entries of data that we use in the area.
(i.e. CMM Process Monitor, Due Date Monitor)
Hones, Fit, Lap Operator
MOOG Controls Corporation, Philippine Branch
Baguio Economic Zone
Loakan Road, Baguio City
August 16,2007 – July 31, 2008
Duties and Responsibilities:
Hones Operator
oSet-up machine for required purposes.
oAchieve final size of inside diameters of piece parts which are with extremely close tolerances, critical surface finishes and fit clearances according to blueprints and/or operation sheets using Sunnen precision honing machine.
oInterpret problems relative to these operations such as camber, bellmouth, barreling and tapering; and take the necessary steps to correct the same.
oOrder all gauging, plan jobs and sequence of operations. Work from blueprints, engineering instructions, sketches, and operation sheets. Use most types of gauging.
Inside diameter Lapping
oSet-up machine for required purpose.
oAchieve required inside diameters of piece parts which are with extremely close tolerances, critical surface finishes and fit clearances according to blueprints and/or operation sheets using Sunnen precision honing machine.
oInterpret problems relative to these operations such as camber, bellmouth, barreling and tapering; and take the necessary steps to correct the same.
oOrder all gauging, plan jobs and sequence of operations. Work from blueprints, engineering instructions, sketches, and operation sheets. Use most types of gauging.
Flat Lapping
oLoading and unloading parts on Speedfam flat lap machine.
oSetting up time and required pressure on the flat lap machine to achieve specified size and tolerances required in the blueprint and/or operation sheets.
LBC Cell Deburr Operator
MOOG Controls Corporation, Philippine Branch
Baguio Economic Zone
Loakan Road, Baguio City
June 1, 2006 – August 15, 2007
Duties and Responsibilities:
- Perform required bench and machine operations to clean; polish; break edges; form radii; blend defects; remove contamination, excess material, and flash; and detect unusual defects in material or workmanship.
- Make own judgments and decisions on defects.
- Responsible for sizing parts, using adjustable measuring instruments such as micrometers, bore-mics, diatests, and other measuring devices,
- Work from operation sheets, blueprints, and sketches to plan entire sequence of work performed.
- Select, sharpen, and/or make special tooling as required.
- Select lighting aids and visual magnification as required to meet quality specifications.
- Work is primarily performed on the most complex, high-value bodies having multi-internal hole intersections.
- Responsible for inspecting each other's work under the audit system.
- Perform other cell fabrication activities including, vibratory deburring, electro chemical deburring, magnetic particle inspection, pulse flush, and cleaning operations.
- Use degreasing machine for cleaning parts.
- Solve problems and plan workflow in a team.
- Run Sodick machines for EDM operations.
Benchwork Finisher
MOOG Controls Corporation, Philippine Branch
Baguio Economic Zone
Loakan Road, Baguio City
June 3, 2005 – May 31, 2006
Duties and Responsibilities:
- Performs repetitive bench and machine operations to clean, polish, break edges, form radii, blend defects, remove contamination, remove excess material, remove flash, remove nodules from EDM operations, and detect unusual defects in material or workmanship. The removal of burrs is accomplished through the use of hand dental tools, hand scrapers, small hand stones, small power tools, sand Blast, belt sanders, and buffing wheels. To remove burrs, many of the parts are held in the hand while working on then. Others, such as cylindrical shaped parts, are held in speed lathes to break edges or form radii in grooves by holding stones or other abrasive tools against the part while it is turning.
- Tasks tend to be external and repetitive (100 to 1,000 piece orders) with some simple, single intersect, internal work occasionally required.
- Work is to be checked by the operator for size of radius or chamfer and completeness of burr removal with the aid of magnifying glass or microscope.
- Work from operation sheets, visual aids, and demonstrations.
- Use degreasing machine for cleaning parts then package parts.
Junior Programmer
JL Business Solutions, 12th flr. Agustin 1 Bldg,
Emerald Ave, Ortigas Center
Pasig city
Sept. 30, 2002 – June 15, 2003
Duties and Responsibilities:
-Responsible for the enhancement of the current business system.
-Creates programs that are necessary for the current business system. (i.e., time synchronizer.)
-Troubleshoot and repair computers with problems.
-Monitor, troubleshoot and repair network connections and activities.
Trainings and Seminars:
AS9100C Internal Audit Training
Basic Zeiss CMM Programming
Schneider Programming Training
Job Instruction Techniques Training
Rotational Leadership Training
Blueprint Reading
Geometric Dimensioning and Tolerancing
Metrology
Gear Dynamics Training
Manufacturing Audit Operator Training
A&T Audit Operator Training
Basic Shop Practices
Workmanship Standard Training
Safe Chemical Handling Training
MOOG Business System Training (MBS)
In-Process Inspection Training
Aqueous Cleaning Training
Electro Chemical Deburring Training (ECD)
Foreign Object Damage Prevention Training
Basic Deburr Training
Statistical Process Control Training(SPC)
Torque Training
Crimping Electrical Connections Training
Lee Plugging/Hydraulic Insert Installations Training
Touch-Up Chemical Conversion Coat
Other Skills:
Computer programming using Visual Basic, Microsoft Access, Turbo C++, Java, and SQL, computer troubleshooting and repair, Computer Network installations, Driving
Educational Background:
Tertiary: Bachelor of Science in Computer Science
University of Baguio
Gen. Luna Rd., Baguio City
1999 – 2002
Technical: Machining NC 2
TESDA-Region 1
San Fernando, La Union
January 2007 to April 2007
Computer Systems and Technician Servicing
La Fortuna Computer Learning Center
Gen. Luna St., Cabanatuan City
1997 – 1999
Secondary: College Of The Immaculate Conception
Sumacab Este, Cabanatuan City
1993 – 1997
Primary: College Of The Immaculate Conception
Del Pilar St., Cabanatuan City
1990 – 1993
Saint Louis University Laboratory Elementary School
Gen. Luna Rd., Baguio City
1987 – 1990
PERSONAL BACKGROUND:
BIRTHDATE : September 20, 1980
PLACE OF BIRTH : Mandaluyong, Metro Manila
GENDER : Male
CITIZENSHIP : Filipino
RELIGION : Roman Catholic
HEIGHT : 5’6”
WEIGHT : 80 kgs.
STATUS : Married
Name of Spose : Jennifer Sapad Alelojo
NUMBER OF CHILDREN : 3
Name : Jennicka Jhayne Alelojo Birth date : August 1, 2003
Name : Paul Luis Sapad Alelojo Birth date : April 1, 2008
Name : Francheska Jane Sapad Alelojo Birth date : November 4, 2011
LANGUAGE OR
DIALECT SPOKEN : English and Filipino
SSS. No: 01-1544536-9
TIN No. : 926-864-953
Passport No. : XX5710154
Driver’s License : A01-11-000443
CHARACTER REFERENCES
Laarni Lumibao
Quality Control Manager
MOOG Controls Corp. Philippine Branch
Dante Tejero
Quality Process Development Manager
MOOG Controls Corp. Philippine Branch
Eleuterio Palis, Jr.
CMM Progammer
MOOG Controls Corp. Philippine Branch
Contact this candidate