Peter A. Rock

** ***** ******

Cohoes, NY

Cell telephone: 518-***-****

E-mail address: acsez2@r.postjobfree.com

I am looking to find a contract or direct full time employment opportunity with a company that has a position available for someone with my background and work experience.

Experience:

5/12/12-Present - Engineering Designer - AMTech Solutions, Malta, NY.

Continued my duties fron M+W Group. Working closely with the customer client (Globalfoundries), I develop and maintain both the Fab and Sub Fab layouts in alignment with Industrial Engineering and Wafer Operations requirements, provide overall Auto CAD drawing modifications to support all Fab Facilities groups (Process Systems, Electric/IC, UPW/IWT, Central Utilities/HVAC, Tool Install/Hookup/PLS, Special Services, Budgeting and Projects) for the fab including Process Flow Diagrams, Piping and Instrument Diagrams, Floor Plans and Plant Maps. I work directly with the tool owners, tool OEMs, contractors, facilities engineering staff, construction management team, and others to ensure correct information is properly captured and included in design packages and data bases. I complete as-built drawings at the completion of projects. Also, revise building drawings for concrete/structural steel modifications. I am the CADD Coordinator for project setup. The responsibilities include obtaining client specific requirements, be the point of contact between disciplines relating to design drawings. This includes Base Plan, Model file and Sheet file set-up. I develop and enforce drafting standards and engineering specifications. All files are generated on the AutoDesk AutoCad 2012 software platform.

9/19/10-5/11/12 - Engineering Designer/Tech/CADD Op- M+W Group, Malta, NY.

Working closely with the customer client (Globalfoundries), I develop and maintain both the Fab and Sub Fab layouts in alignment with Industrial Engineering and Wafer Operations requirements, provide overall Auto CAD drawing modifications to support all Fab Facilities groups (Process Systems, Electric/IC, UPW/IWT, Central Utilities/HVAC, Tool Install/Hookup/PLS, Special Services, Budgeting and Projects) for the fab including Process Flow Diagrams, Piping and Instrument Diagrams, Floor Plans and Plant Maps. I work directly with the tool owners, tool OEMs, contractors, facilities engineering staff, construction management team, and others to ensure correct information is properly captured and included in design packages and data bases. I complete as-built drawings at the completion of projects. Also, revise building drawings for concrete/structural steel modifications. I am the CADD Coordinator for project setup. The responsibilities include obtaining client specific requirements, be the point of contact between disciplines relating to design drawings. This includes Base Plan, Model file and Sheet file set-up. I develop and enforce drafting standards and engineering specifications. All files are generated on the AutoDesk AutoCad 2008 software platform.

2/02/09-06/11/09 - Engineering Designer/Tech/CADD Op- CHA Companies, Albany, NY.

I am responsible for Mechanical Design of new and existing HVAC, Plumbing and Fire Protection. Also, revise building drawings for concrete/structural steel modifications. I am also CADD Coordinator for projects. The responsibilities include obtaining client specific requirements, be the point of contact between disciplines relating to design drawings. This includes Base Plan, Model file and Sheet file set-up. All files are generated on the AutoDesk AutoCad 2008 software platform.

12/15/08-1/30/09 - Mechanical Designer- International Electronic Machines Corp., Albany, NY

I primarily resumed my duties on the projects I was responsible for when I was previously employed with this company. I used the Co-Create software program to develop the CAD layouts and drawings.

7/28/08-11/26/08 - Mechanical Designer- Lockheed Martin @ the Michoud Assembly Facility, NASA, New Orleans, LA

- Contract thru Total Technical Services

I am working on setting up Engineering Schematic drawings, P&ID drawings, Instrumentation drawings as well as Facilities Maintenance drawings Also, revise building drawings for concrete/structural steel modifications. The drawings are generated on the Auto Desk Building Systems 2008 and CADWorx P&ID 2008 software platform.

6/19/05-7/25/08 - Mechanical Designer- TEL Technology Center Albany, NY

- Contract thru Kelly Engineering Resources

I worked on setting up Mechanical part models, assemblies and drawings, migrating parasolids and .step files. I supported Engineers in the re-design of the 300mm Wafer Insulation Module. These Modules were made of a high temp aluminum alloy, beryllium copper and brass for cryogenic purposes. They had to keep their mechanical properties and strength under very low atmospheric pump-downs and then very high bake-outs. I worked with vendors choosing purchased parts, fabricated machined and welded parts. I designed sheet metal enclosures and modified existing ones to accompany enclosure upgrades, and wrote the bills of materials. I did part drawing checking of other Designers and Engineers for correct dimensions, fits, tolerance stack-up and standard note callout. I was responsible for concept creation, product design, product development, project management, product improvement, releasing files created from Autodesk Inventor and stored with the Vault software or Solid Edge Rev17 software.

10/25/04-6/16/05 - Mechanical Designer- Stantec Corp., Albany, NY

- Contract thru ATS Reliance

I worked on setting up Engineering Schematic drawings, P&ID drawings, Instrumentation and Electronic Cabinet drawings. Also, revise building drawings for concrete/structural steel modifications. I did drawing checking of other Designers for correct standard callouts as well as overall appearance. The drawings are generated on the AutoDesk Building Systems 2005 software platform.

9/20/04-10/22/04 - Mechanical Designer- International Electronic Machines Corp., Albany, NY

I primarily resumed my duties on the projects I was responsible for when I was previously employed with this company.

7/08/04-9/17/04 - Security Service Assistant, New York State Police – Empire State Police, Albany, N.Y.

My primary duties were to patrol and safeguard the building that make up the Plaza – the 1 thru 4 Agency Buildings, the Department of Motor Vehicle Buildings, the Corning Tower, the Egg, the Legislative Building, the Justice Building, the Concourse Plaza as well as the Capital Building.

4/21/04-6/28/04 - Mechanical Designer- Magnum Integrated Technology, Westbrook, Maine

- Contract thru CadStar International Agency.

My duties included creating solid model parts as well as assemblies, along with the detailing of the parts and the setup and writing of bills of materials for the assembly drawings using ISO Dimension and Tolerance standards as well as other established mechanical drafting practices. I worked with Mechanical Desktop 2004.

9/14/03-2/26/04 - Mechanical Designer- International Electronic Machines Corp., Albany, NY

- Contract thru Addecco Technical.

I worked on enclosure packaging design and development. This enclosure had mechanical and electrical as well as pneumatic parts and assemblies. I designed sheet metal enclosures as well as welded plate enclosures. I designed pre-cast, pre-stressed bays with structural steel to house the instrumentation packages housed within. I made detail drawings for the shop to do the prototype parts. I set up drawing formats and checked drawings for correct callouts and notes.With Excel I set up a form for writing the bills of materials to accompany the assembly drawings.

10/21/02-6/20/03 - Mechanical Designer- Wizard Works Product Development Company, Albany, NY

I worked with the President and Vice President of Manufacturing in the development of new and existing products for the water park industry. The main focus was on water guns,

blasters and tipping buckets of varying concepts. My main focus was to finalize new

concept design. I designed sheet metal enclosures for the power distribution and pneumatic instrumentation hidden into the modular platforms, readied drawings for fabricators as well as worked with the customers in making sure that they had working drawings, and 3D models if necessary, to incorporate into their drawings and other literature as they needed.

1/15/99-10/18/02 - Mechanical Designer- Intermagnetics General Corp., Latham, NY

- Contract thru various Employment Agencies.

My duties included creating solid model parts, as well as assemblies, along with the detailing of the parts, sheet metal housings and aluminum weldments. Also the setup and writing of bills of materials for the assembly drawings. I wrote, and kept track of the product structure, and completed engineering changes that arose from either new design concepts or manufacturing changes. I have been trained in, and have extensive knowledge of, the ANSI Y14.5 Dimension and Tolerance standard, as well as other established mechanical drafting practices. I have received certificates in training completion for the AutoDesk Mechanical Desktop 4 and Inventor 5.3 (both 3-D design packages) and I am applying that training on a daily basis at my present location. I work with AutoCAD 2000 in producing 2D drawings for Mechanical Desktop, and AutoCAD 2002 with the Inventor software.

9/20/98-1/12/99 - Mechanical Designer- ESPEY Mfg. & Electronics Corp., Saratoga, NY

Responsibilities included the design and implementation of new electronic power supplies. I designed sheet metal enclosures for the power distribution instrumentation. I finalized new concept designs, produced detail part and assembly drawings and wrote the bills of materials. All of the layouts were created from AutoCad Rev. 13 to produce the final mechanical and assembly drawings. The Bills of Materials were generated on Microsoft Excel.

2/2/98-5/26/98 - Product Engineer- Comfortex Window Fashions, Maplewood, NY

My responsibility here was to design and implement new products. I finalized concept designs, produced detail part and assembly drawings and wrote up the bills of materials. I developed fabrication techniques, published specification manuals and trained technicians. I gained working knowledge of Corel 6.0 software and worked from AutoCAD Rev. 13 to produce the mechanical drawings and layouts.

4/5/94-1/30/98 - Lead Machine Designer- Rupprecht & Patashnick Co., Inc. Albany, NY

Under the guidance of the Project Engineer, I completed concept designs and produced final design layouts. I modified Hoffman enclosures for the mining environment, and designed sheet metal enclosures for the power distribution and pneumatic instrumentation. After final review, I produced the part and assembly drawings. Also, I assigned part numbers to the parts and assembly drawings as well as completed the bill of materials. I was in charge of the procurement of all fabricated and purchased parts. I assisted the assembly technicians in the first time build of the units. To generate the drawing layouts, detail and assembly drawings, I used the Cad software AutoCAD Rev. 14 with Toolbox support. I used Microsoft Excel to help in the tracking of parts, and used Microsoft Word in the writing of the quotes and faxes for the fabricated parts.

Previous Employment;

6/1989-3/1994 – Mechanical Designer/Drafter

Atlas Copco, Inc. Voorheesville, NY

8/1987-6/1989 – Mechanical Designer/Drafter

Contracted with various Albany area businesses.

7/1987-6/1981 – Senior Draftsman

GTE/Sylvania, Ipswich, Mass

Layout Draftsman

Eaton-Nova Corp. Danvers, Mass

Ion Beam Tech. Beverly, Mass.

Union Carbide Corp. Bennington, Vt.

Detail Draftsman

Union Carbide Corp. Bennington. Vt.

(Contracting thru TAD Tech. Services, Schen., NY)

Education:

Hudson Valley Community College, Troy, NY.

Associates Degree – Applied Science, 1978 – 1980, 1983

Cohoes High School, Cohoes, NY

1974 – 1978 - Regents Diploma

References:

Professional and personal references will be provided at your request.

Contact this candidate