Chemist / Lab Tech

Location:

Pearland, TX

Posted:

January 13, 2016

Contact this candidate

Resume:

Resume for Shad Mian.

***** ***** **** *****, *******, Texas 77047

Phone # 832-***-****, Email: acs3pt@r.postjobfree.com

I am applying for Chemist / Laboratory Technician position.

SUMMARY OF QUALIFICATIONS:

I participated in Lab Safety programs and audits, safety of lab techs, equipment and chemical storage.

I have used ASTM, IP, UOP methods.

I have the required education and experience in physical and analytical testing in petrochemical labs.

My computer skills include Microsoft Word, Excel and Power Point.

I am experienced in multi-tasking and time- management while running the samples.

I have performed routine and non routine tests, reported results via LIMS and created COA’S.

I was involved in the development of new methods, writing SOP’S, calibrations and QA/QC.

EMPLOYMENT HISTORY:

2013 – Present: Working as a Chemist / Lab Tech in a Biodiesel lab.

I was involved in the QC testing of biodiesel. I analyzed the samples for acid number, soap, water, sediments, flash point, cloud point, cold soak, mono, di, tri and total glycerides and oxidation stability. Other responsibilities included creating templates and lab worksheets and ordering lab supplies

2011: Worked as a chemist at Intertek, Texas City, TX – (Contract Position)

I was involved in the physical and analytical testing of crude oil, fuel oil, VGO, gasoline, diesel, jet fuel, and bio-diesel samples. I tested the samples as per specifications and issued COA

2010: Worked as a Lab Supervisor at Certispec USA, Texas City, TX -Contract

This was an inspection company with a small laboratory. My responsibility as a lab supervisor was to help the lab techs in their daily activities. I also ordered lab supplies, created work-sheets and issued Certificates of Analysis. My responsibility was to make sure all the samples are analyzed as per specifications. I have analyzed Waste Water Samples for Oil and Grease, Dead Bottoms Samples for Bacteria Check, Total Sediments in Residual fuels, Methanol Wall Wash and many more tests.

2008: Worked as a chemist at Camin Cargo, Pasadena, TX – Contract Position)

I have tested the following products: Gasoline, Diesel, Bio-diesel, Jet Fuels, Crude Oils, & Other Petrochemicals. I have performed the following tests: RVP, Distillation, Cu strip, NACE corrosion, Gums, Doctor test, Mercaptans, Sulfur, Benzene (D3606), Oxygenates (D4815), Aromatics (GC-MS and DCPD D5569), Flash pt, Pour and Cloud pt, CFPP, DuPont, Ash, Carbon residue, Viscosity, Water by Karl Fisher, Water by Distillation, BS&W, Sediments, Salt in crude, Lubricity, Smoke point, Oxidation stability, Freeze point. Entered data in LIMS and produced a Certificate of Analysis.

2000 - 2007: Worked as a lab tech at Inspectorate, Pasadena, Texas – Lab Tech

I was involved in the physical and analytical testing of the following products: Crude oil, fuel oil, VGO, gasoline, diesel, jet fuel, and bio-diesel samples. Tested the samples for copper and silver corrosion, NACE corrosion, viscosities, water by distillation, API, smoke point, sediments, ash, sulfated ash, RVP, distillation, SAYBOLT color, ASTM color, PT_CO color, haze reading, appearance, odor, sulfur, nitrogen, chloride, iodine value, benzene, oxygenates, aromatics. I have used gas chromatographs, HP-5880, Chem. Station and GCMS. Also analyzed Round Robin Samples

I was self employed during May 1997 thru Dec 2000.

A detailed list of the methods, instruments and necessary glass ware needed to perform the tests are listed below

1978 - 1997: Shell Chemical Company, Deer Park, Texas – Sr. Lab Tech

Analyzed C2=, C3=, BB, BD, IP, DCPD, LPG, and water; to make sure the performance of the plant is safe and the environments are clean. Cross trained in Olefins, Environmental, Intermediates and Solvents laboratories to become more adaptable and valuable to the company. I coordinated health and safety issues in the lab to prevent injuries and practice safety at work and home. Also did water, asphalt and GC analysis for olefins samples. I maintained the QC and calibration program for the QC Lab. I was involved in the preparation of ISO audit in 1990.

1973 – 1978: ARAMCO

Worked in the PVT lab. Responsibilities were to collect and analyze samples from water wells, gas oil separator plants and crude oil wells from both on shore and off shore.

Education: BS in Chemistry and I am a USA Citizen

I am familiar with the following methods, the instruments and necessary glassware used to perform the tests.

Flash Point Closed Cup (Jet Fuel)

Distillation

Flash Point Closed Cup, Procedure A & B

Water by Distillation

Pour Point

130

Copper Strip - Corrosiveness to copper from Petroleum Products

156

Saybolt Color of Petroleum Products

287

API Gravity (Hydrometer)

381

Motor Gases Unwashed & Washed Gums

445

Kinematic Viscosity of Transparent and Opaque Liquids

473

Sediments (Thimble) in Crude and Fuel Oils by Extraction Method

482

Ash from Petroleum Products

524

Ramsbottom Carbon Residue of Petroleum Products

525

Oxidation Stability - Induction Period

611

Aniline Point

848

Acid Wash Color of Industrial Aromatic hydrocarbons

849

Copper Corrosion in Benzene

850

Distillation

852

Solidification Point of Benzene

853

H2S & SO2

974

Acid and Base Number by Color Indicator Titration

976

Cetane Index (Calculation)

1078

Distillation

1125

Conductivity

1209

Color of Clear Liquids (PT-CO Scale)

1293

1296

Odor of Volitile Solvents and Dilutents

1322

Smoke Point of Kerosene and Aviation Turbine Fuel

1353

Non Volatile Matter in Solvents

1363

Permanganate Time of Acetone and Methanol - Wall wash samples

1364

Water (KF)

1401

Water Separability of Petroleum Oils and Synthetic Fuels

1464

Water (KF)

1493

Solidification Point - Industrial Organic Chemicals

1500

ASTM Color of Petroleum Products

1613

Acidity in Volatile Solvents and Chemical Intermediates

1722

Hydrocarbon / Water Miscibility of water soluble Solvents - Methanol wall wash

1796

Water and Sediments in Fuel Oil by Centrifuge Method.

2090

Appearance

2109

Non Volatile Matter in Halogenated Organic Solvents and Ad Mixtures

2110

2163

Analysis of LPG and Propane by GC

2274

Oxidation Stability

2306

C8 Hydrocarbon Analysis - GC

2386

Freezing Point

2500

Cloud Point

2622

Sulfur by X-Ray Spectrometry

2624

Electrical Conductivity of Aviation and Distillate Fuel

2709

BS&W - Water and Sediments in Middle Distillate Fuels.

2989

Acidity - Alkalinity of Halogenated Solvents - Acetone

3120

Sulfur - Trace Quantities of Sulfur using a micro coulometer

3227

Mercaptan Sulfur

3230

Salt in Crude Oil

3240

Undissolved water in Aviation Turbine Fuels

3241

Oxidation Stability JFTOT

3242

Acidity in Aviation Fuels

3246

Total Sulfur

3338

Heat of Combustion

4006

Water in Crude by Distillation

4007

Water and Sediments in Crude Oil by Centrifuge Method.

4052

Density and Relative Density of Liquids by Digital Density Meter

4176

Water and Particulate Contamination in Distilled Fuels (Haze Reading)

4294

Sulfur - by X-Ray

4530

Determination of Carbon Residue (Micro Method) & 10% Bottom

4737

Cetane Index (Calculation)

4740

Compatibility / Cleanliness

4790

Acid Wash Color

4807

Sediments in Crude by Membrane Filters.

4814

Drivability Index (V/L Ratio - Calculations)

4860

Free water and Particulate Contamination in Mid Distillate Fuels.

4952

Doctor Test

5002

Density and Relative Density of Crude Oils by Digital Density Meter

5191

RVP Mini Method

5386

Color - Hunter. PT-Co

5452

Particulate Contamination (Filtration)

5453

Sulfur by Antex

5571

Cloud Point (Auto)

5705

Measurement of Hydrogen Sulfide in the Vapor Phase (Draeger Tube)

5972

Freeze Point (Automatic Phase Method)

6217

Particulate Contamination (Filtration)

6304

Water by Karl Fisher (Coulometric)

6371

Cold Filter Plugging Point (CFPP)

Contact this candidate