Ref:

Enclose Curriculum Vitae (* pages) In attendant :

PASCU DAN

ADDRESS: * *** ****** **. **, Bl. C6,

fl. 9, apt. 40, sector 6,

Bucharest- Romania

TELEPHONE: mobile phone: +407**-***-***( from Romania )

E-MAIL: acs1yk@r.postjobfree.com

SKYPE ID darojobs

PERSONAL INFORMATION

AGE: 52

DATE OF BORN : 02.02.1963

MARITAL STATUS: Married, one child

MILITARY SERVICE: Fulfilled

EDUCATION

HIGHER

EDUCATION: 1984 - 1989

(PROFESSIONAL Institute of Oil and Gases-day courses

TRAINING): - Ploiesti

Faculty of Drilling oil Wells and exploitation of oil and gases deposits

Oil&gas engineer – Master in oil &gas

WORK EXPERIENCE

1)PERIOD : March 2015 –up to present

COMPANY : CHEVRON – China, Sichuan Province

EMPLOYER: WORLEYPARSONS - China

POSITION : Commissioning Technical Coordinator

Chuandongbei Project - entails the development of three related sour gas fields in the Sichuan province of China. Overall Development 1 (ODP-1) involves relocating an existing gas purification plant (Xuanhan), installation of a 60 km sour gas gathering system, the design and construction of gathering stations for gas dehydration and well construction. This plant and system capacity is ~ 318 mmscf/day/ and a 1200 tonnes of sulfur.

Lead systems/subsystem punchlist planning, walk-downs, documentation, and close-out as required to systems are completed per project specifications and regulatory requirements.

Responsible for maintaining documented records of daily activities and reporting daily status to Lead.

• Communicates changes of resource and scope of work requirements to Lead Process Engineer.

• Liaise with other disciplines, departments, project personnel, vendor and contractors. Works with CDB Ops Advisor/Team Lead to ensure ops coverage is supplied as needed to support commissioning and/or system operation.

• Serve as technical specialist in all matters relating to commissioning completion and start up of all instrumented systems. Works with Lead Engineer to ensure completion, closeout and handover of system with required signoff of PSSR and handover documentation.

• Provide technical support in the resolution of technical issues during commissioning and initial start up.

• Support in the Handover of all assets to the OTT team at Final Handover in accordance with the Completions and Handover Procedure.

• Support the implementation of safety in design (SID) in the execution of construction activities.

• Work in a cross functional Commissioning Group to perform Commissioning and Start Up activities in the Sulfur Plant.

• Pre commissioning and commissioning activities such as system walk downs, punch list prioritization, PTW, LOTO.

• Reading, interpreting, & editing (Red-lining): P&IDs, PFDs, piping, mechanical, electrical, & control drawings.

• The creation and review of Commissioning Procedures (FTPs, SATs, ) of Sulfur Forming and related Auxiliary Systems such as Fresh Water, WWT, Cooling Water, Air/N2 etc.

• Conducts PTW Audits, manage system interfaces, isolations, incident reporting and documentation.

2)PERIOD : June 2014 –February 2015

COMPANY : EXXON MOBIL ( Mobil Cepu Limited ) - Indonesia

EMPLOYER: KENTECH GLOBAL SERVICES

POSITION : Lead Process System Completion Specialist

• Develop dynamic commissioning procedures needed to execute Project Systems Completion Activities

• Endorse MC & SC Checksheet and Dynamic Commissioning Procedure

• Review Vendor commissioning procedure

• Support to preapre System Completion Schedule

• Support to populate CMS Engineering Data and provide all Design or Field Change updates to CMS Data Base Engineer

• Support to prepare TCP (Turnover and Completion Package)

• To perform system completion activities

• Verify Punch List items completion and update the CMS Data Base

• Coordinates Systems Completion activities within the discipline and ensures that all works are carried out with high quality

• Ensures materials, special services, and resources to successfully execute scope of work are available

• Assists Systems Completion Leads in working with the Start-up Team to achieve successful Turnover and acceptance and ACCEPTANCE to MCL Operations

• Completion verification of all work detailed within the process discipline sections of the Commissioning / integration plan and provides commissioning assistance to the commissioning engineers during the facility commissioning.

• Provide the start-up assistance to the Company as necessary.

3)PERIOD : September 2013 –June 2014

COMPANY : Hyundai Engineering & Construction-Kuwait

POSITION : Process & Commissioning Operations Engineer

-Coordinating commissioning activities for ‘’Installation of Low Sulphur Fuel Oil (LSFO),Fuel Gas and Fuel Oil of 48 inches pipelines from Mina-Al Ahmadi Refinery to Sabiya and Doha Power Stations’’ in northern part of Kuwait.

• Coordinating SAT completion and FAT procedures for FMC fiscal metering skids at MAA and power stations and BS-180 checking ultrasonically sound for each transducer of each flow element on flowing streams.

•Elaborating, checking and revising Site Mechanical Running & Performance Test ( SMR & PT ) for compressors, methanol injection system, biocide injection system,oil drain systems and other equipments.

•Checking and revising SAT and FAT, according vendor suggestions, procedures and datasheets

•Supporting the project control team for turnover and completion package

•Verify punch list items for the equipment on site and adapt on MRT according commissioning procedures

•Performing writing and reviewing Procedure documents related to Pre-Commissioning and Commissioning activities, Instrumentation Function test, create and implement Inspection test report for Pre-commissioning and Commissioning activities,etc.

•Maintaining record and update the Instrument Index Instrumentation SPI data base.

•Corrective action implemented in project design, solutions and report updated to engineering department involved .

•Site Inspection on Mina-Al Ahmadi refinery of the KOC Project for Module inspection and Preservation scope.

•Prepare document related to Commissioning phase as per procedure, documenting inspection, Construction Pre-commissioning Application, managing completion process and acceptance of systems, monitoring and controlling loop checking process, C&E testing, function dynamic testing and commissioning, managing pre-commissioning processes and acceptance of pre-commissioned systems

•Coordination of process simulation illustrating thermo-dynamical changes that occurred during flow for Compressor Anti Surge Control valve with IN 24 inch OUT 30 inch according PRO II software

•PFD, UFD & P&ID Development for projects at Basic engineering as well as at Detailed engineering stage for various EPC projects. Also participated in project kick-off and P&ID review meetings.

•Design & adequacy check of Shell & Tube Heat Exchangers using HTRI.

•Sizing of equipment like Vessels, Tanks, Tray towers, etc.

•Single & Two phase hydraulic system design including Pumps, Compressors, Control valves and Flow elements.

•Relief system design i.e. Scenario development, Relief load calculations, Safety valve selection & sizing, inlet line and Flare header sizing as per API standard.

•Venting, Breathing and emergency venting calculations for atmospheric and low pressure tanks as per API 2000.

•Development of Heat & Material Balance. (Process Simulation using Aspen HYSYS and PRO-II.)

•Preparation of Material Selection Diagram (MSD), Design Pressure & Design Temperature (DPDT) Map, and Utility Distribution Diagrams.

•Settle out pressure calculations to set design pressure of compressor suction system.

4) PERIOD : August 2007 – August 2012

COMPANY : Messer Group –Bucharest –Romania

POSITION : Process Operations & Commissioning Engineer

PROFESSIONAL

ACTIVITY:

Messer Romania Gas is the branch in Romania of German company Messer Group GmbH

I have coordinated all operations necessary for built-up air separation factories for different customers in Romania.

• Process management & optimization of a 55-tonne per day, Liquid Oxygen (LOX), 2-tonne per day Liquid Argon (LAr) cryogenic Air Separation Process plant. Responsible for minor process design (simple technical change) & improvements;

• Process management & optimization of a 70-tonne per day Liquefied Nitrogen (LN) Process Plant;

•Selection of Rotary Machinery (Pumps, Compressor) and associated calculations including NPSH (a), Max. Suction/ discharge pressures, Settle-out pressure etc.

•Preparation of process data sheets of Pumps/ Compressors/ Vessels/ Storage Tanks/ PSVs/ Pressure Vacuum Relief Valve & Emergency vents/ CV/ FE/ RO/ Instruments etc.

•Preparation of process specifications of packaged items like Gas Turbine/ Air Cooled Heat Exchanger / Thermal P&ID’s, Process design philosophies for Fuel Gas, Oil Gas and Rich Gas, Control philosophies, Sizing and selection of process equipment, designing /writing specifications for pumps, vessels, compressors, Instruments & control valves, Choke valves, pressure safety valves and other packaged equipment (Thermal Oxidizer / Incinerator, Flare system and vent stacks, Instrument Air Package, Hot Oil Package, Potable Water Package, Methanol and Corrosion Inhibitor Injection Package, Nitrogen Generation

• Ensuring contract pipeline gas supply at pressure, flow and compositional specification to pipeline customers;

* Participation & assistance in facility shutdowns as required. Preparing of Instrumentation, Piping components, Special Part, Equipment List.

Preparing Equipment and Instrument Process Data Sheets. Safety Valve sizing (Relieving Capacity, Sizing of Valve, Inlet & Outlet Piping, Rated Capacity).

Preparing Control Valve process data.

Preparing Line List (Line Schedule)

Pump calculations (NPSH), Hydraulic Calculations, Line sizing

5) PERIOD : January 2005- July 2007

COMPANY : ENI –AGIP ROMANIA

AGIP is the branch in Romania of ENI-ITALY, one of the biggest oil company in the Europe.The main activity consist in, distribution of gasoline and diesel oil by gas station.

POSITION: Commissioning Engineer

PROFESSIONAL

ACTIVITY:

Coordination, supervision and check out the operations consists in built up of gas station.I coordinate directly the construction of 3 filling station in 2006 such as:Agip Timisoara, Agip Pitesti and Agip Braila .

-Lead various projects in the field of construction works and to assist the management to introduce modern projects coordination techniques.

Sets up and coordinates the implementation of new investment and maintenance projects.

- Controls and coordinates the activity of subcontractors.

-Supervising activity of technical maintenance made for good function of pumps, car-wash, refrigerating plant, different electrical machine, and other equipment.

The main responsibilities consist in:

-Coordination of existence in the field of technological project signed by the designer and follow up to keep in order of bench mark from layout and put in practice in the field.

Involved in solving daily technical problems on following equipment:

- PLC Allen - Bradley (Basic Software : Windows NT) within the Automatic filling station

In charge of start-up, repairs, maintenance and operating of the control loops of flow, temperature, level and pressure. Checking and start-up measuring and control loops interlocking system. Checking transmitters, recorders, controllers and control valve how they are working in field and how are sent from the field to central control room. Troubleshooting of computer and auxiliary network equipment, control file and signal conditioning cards for DCS. Knowledge in assembling and disassembling the equipment according to specifications. Extensive knowledge of workshop practices and facilities. Extensive knowledge of protective system, start-up logic, vibrations and governing system reciprocating centrifugal machines. Knowledge in repairing and maintenance of intelligent transmitters, recorders and controllers such as Foxboro, Yokogawa, Barber-Coleman, Bentley-Nevada,

6) PERIOD : June 2003 – January 2005

COMPANY : S.C.ROMCONTROL S.A.

First Romanian Survey company accreditted by RENAR, with 50 years of activities in quality and quantity determination of fuel,oil&products,petrochemicals and others products.

POSITION : Quantity Surveyor

PROFESSIONAL ACTIVITY :

Inspection of general condition of the means of transport including tightnes and/or cleanliness test,supervision at loading/unloading&monitoring of distribution of oil products.Coordination of sampling,preparation of average composite samples,inspection of tests/analysis in accredited fuly-owned laboratories,running and accuracy tests .

Coordination and inspection of draft survey,ullage and volumetric measurement for our importants clients such as: SNP-PETROM, LUKOIL DOWNSTREAM, GLENCORE INTERNATIONAL, VITOL SA, COTECNA Gmbh and more others.

Conduct site measures as required, and take-offs from drawings leading to the preparation of bill of quantities.

Responsible for Steel Structure, Piping,Electrical & Instrumentation quantity surveying deliverables being prepared correctly as required by the contract and internal requirements.

Check & Approved Subcontract Claims & Issued Invoices.

Controlling/ Monitoring/Updating Daily, Weekly, Monthly Progress.

Interfacing with the client quantity-surveying representative with regards to agreements to measured quantities and associated estimated values of work completed.

Experience in progress measurement, tracking installed quantities, interpreting construction drawings, and invoicing based on unit rates as a constructing job site

7) PERIOD : February 2002 – June 2003

COMPANY: S.C.BUTAN GAS ROMANIA S.A

This company is the representation in Bucharest of the biggest distributor of liquefied petroleum gas (L.P.G.),in Europe: BUTAN GAS S.P.A.- MILANO.We have branches all over in Europe,for example: PETROGAZ S.A.-ATENA,PROPANGAS A.G.-VIENA,DRACHEN PROPANGAS GmbH-FRANKFURT,DRAGON-GAS S.A.-MADRID and more others.

POSITION : Senior/Lead Process LPG Engineer

PROFESSIONAL ACTIVITY

I was responsible with the unloading of L.P.G. from barge tank,tanks and storage them in pressure reservoirs.I have 5 reservoirs for propan of 200m3 each,and 5 reservoirs for butan of 200m3 each.I supervise the distribution of L.P.G. from reservoirs to autotanks and gas cylinder by pipe-line.Also I supervise and check the good function of the compressors,centrifugal pumps in the warehouse.All the equipment is automatized and he was installed by CRISPLANT-Denmark.

Corelation with the density of the gas to established technical caracteristics making after technical safety data of combustible gases and vapours.Carring out controllers fine tuning skilled diagnosis and defect repair for equipment in accordance with the maintenance plan or response to failure of equipment Checks the equipment to locate the fault,decides on appropiate method of repair and carrying out the job.

In the same period I work with my team in infield (6 manifold for recived the propane and butane from tanks by railway ) .

Provide input to the development and implementation schedule for all shutdowns and turnarounds in my area of responsibility.

Lead constructability reviews with other stakeholders during the detailed planning phase of shutdowns and turnarounds.

Develop shutdowns execution safety and quality plans for my assigned area of responsibility and ensure full compliance.

Coordinates the safe execution of assigned shutdown or turnaround, within safety, quality, cost and schedule targets.

Ensures full compliance to agreed work list and gain approval from any scope deviation.

Coordinates the site mobilization of contractor personnel and facilities in compliance with Client’s Safety Policies and Procedures.

Ensures that project execution and contractors work areas comply with Client’s housekeeping standards.

All task and responsabilities for a instrument foreman

Work with Fire&Gas and Fire Fighting device,and put all this in function . ...

Working in comissioning,and precomisioning activities in intrumental department

8)PERIOD: June 1998 – February 2002

COMPANY: OMV- PETROM – Ploiesti

POSITION: CDU Unit Process Supervisor

PROFESSIONAL ACTIVITY

Detached by CONPET,for coordinate and supervise the delivery by pipelines of the crude oil from the extraction oil fields to the CDU distillation unit from PETROBRAZI Refinery.

Crude oil was delivery to the refinery in the following quantities:

10 inches diameter - 600 tones/day

12 inches diameter -1200 tones/day

14 inches diameter -3500 tones/day

Responsible for independent operation of crude and vacuum distillation unit. Key responsibilities included production planning of crude and vacuum distillation unit, manpower management, and maintenance activity for the equipments.

Fully managed the first major turnaround of 6 MMTPA crude and vacuum distillation unit. Was completely in-charge of the CDU section and also responsible for the implementation of the new modifications and carried out more than 500 tag jobs during the shutdown with other shutdown activities.

Handled emergency shutdowns such as from power failure, pump failure, vacuum lost in vacuum column and also handled the startup activities.

Troubleshooting, modifications such as to modify the existing lineup of the desalter with new valves so that de-sludging of one desalter can be done keeping the other desalter in line,

Technical core member of decontamination of crude and vacuum distillation unit and assisted in making the decontamination strategies and the temporary modifications for the decontamination and was in-charge of the CDU section.

Member of annual turnaround planning team and assisted in preparing the shutdown manual with all the modification drawings and list of all equipments for maintenance, list of tag jobs.

Responsible for optimizing the steam consumption in the crude and vacuum distillation unit by doing the steam consumption survey.

9) PERIOD: August 1989 – June 1998

COMPANY: S.C. CONPET – Ploiesti

POSITION:

Commissioning Engineer (Crude Oil /Refinery Terminals)

Pipeline Reability Supervisor

PROFESSIONAL ACTIVITY

Coordination of commissioning activities of crude oil by main pipe lines of 10”, 12’ and 14” between the production oil wells and the oil refineries (Ploiesti, Pitesti, Constanta).

-Operations & maintenance tank farms (about 20 tanks of 3.500 mc each) & lot of process piping, 5 pump stations, primary laboratory analysis of crude oil by centrifugal method, ASTM method,removing water from crude, the suspended solids and quantity measurement of crude oil levels in tanks before pumping to the refineries.

-Coordinating the desalter unit to remove water and magnesium chloride from crude using an low electric field

-Perform scheduled and requested checks and acceptance of all stage of pipeline reliability works (earth works, excavations, trenching, pile driving, concrete pouring of foundations,, construction of different types of buildings, erection of structural steel, roads construction, fit-up, dimensional checks, weld joint checks, NDT results check, checks of equipment installation, piping and tanks installation/erection, painting and covering, sand blasting and insulation),

-Coordinating the pre-commissioning and commissioning activities, which consist of: Water Flushing, Air Blowing, Chemical Cleaning, Vacuum Drying, Chemical loading, Oil Flushing, Motor Run In, Pumps Run in, Blowers And Vacuum Pumps Run In, Air coolers Run In, Compressors Run In, Tightness Test, Leak Test, Service Test, Water run, Systems Inertization With Nitrogen.

Overseeing the Inspection activities for witness inspection for Hydrostatic Test, Pneumatic Test, for Final line check/ Reinstatement check

Coordinating the checking Piping Test Block Status (TB) and participating in Air Blowing activities an pigging operations for pipelines during almost 500 km.

Blending & Storage

Preparing normal start-up, normal operation, normal SD procedures.

Training and assessment of shift supervisors and field operators.

Coordinating of all blending operations for petroleum products, loading, unloading

of crude oil.

FOREIGN LANGUAGES: English (spoken, written) - very well

French (spoken, written) – well

Italian (written, spoken) – not so well

COMPUTER SKILLS:

HYSYS \ PRO-II (Process Simulation).

HTRI (Heat exchanger design).

Aspen FLARENET.

TRAY 2000 (Tray-Tower design).

PIPESIM.

BEST PIPE (Hydraulics Analysis).

CHEMPRO.

AutoCAD.

BEST PRV (PSV Sizing Tool).

BEST RO (RO Sizing Tool).

MS VISIO Technical.

InstruCalc 5.1 Plus

OTHER ABILITIES: B Driving license since 1997, passport.

Contact this candidate