JAYSON SY VILLALUZ

** ******* ****** **** ********** Village

Lucena City, Philippines 4301

Email: acs161@r.postjobfree.com

Mobile: +63-930*******/ 63-906*******

Skype I.D: jaslucas1001

POSITION DESIRED:

MECHANICAL ENGINEER

Any mechanical Eng’g Related Jobs

OBJECTIVE:

To gain employment in which my leadership, expertise, experience, comprehension and proficiency will be an utmost input to the company especially in the area of Mechanical Inspection/ Maintenance Rotating & Static Equipment.

AREA OF INTEREST: ENGINEERING SKILL:

Reliability Center Maintenance Permit to Work System (LOTO)

Rotating Equipment Maintenance Plant Operations (Start-up & shutdown)

Predictive Monitoring Techniques Safety Equipment Installations & Operations

Static equipment Maintenance Pre-Commissioning/Commissioning Plant

Mechanical Equipment Installation Field / Site Acceptance Test& Solo RUN test

Qc/Qa Mechanical Inspection Mechanical Equipment Safety

I have solid experienced in operation, startup & shutdown and commissioning in oil & gas and petrochemical facilities, Utilities and balance of plant BOP. Perform a wide range of duties relating to the mechanical installation, repair &maintenance of machinery, equipment and fixtures to ensure their efficient operation at minimum downtime complying with EHS Guidelines with a focus on continuous improvement. Coordination with various discipline during commissioning& project executions. Familiarized with the conveyor operation and maintenance plusrelevant skills in Mechanical Equipment Preventive Maintenance/ Rotating Equipment/ Alignment.Strong Analytical & Foundation of mechanical Engineering. Eng’g drawing/ Hydraulics &Pneumatics / Automotive and HVAC system. Machine Design / Stress calculations & design. Precisions Tools Measurement, Basic Instrumentations and Basic Electricity. PFD, P&ID, as BUILT Drawing Interpretation and line/ system checking/ tracing and tagging, PTW-LOTO.Familiarized with SAP Interface/ Maximo Software Interface.

GOVERNMENT ELIGIBILTY:

Completed Thermal Power Plant Operations & Maintenance Apprenticeship (968hrs)

TESDA Accredited Training Program (500MW Coal Fired, Single Reheat Boiler)

Pearl Energy Phil. Operating Inc. / Quezon Power Plant Ltd. Co.

Quezon Power Plant, Bgry. Cagsiay I Mauban Quezon Phil.

June 2012 – Dec. 2012

Mechanical Engineering Licensure Examination(September 28 & 29, 2011)

Ratings: 83.35 % PASSED, Mechanical Engineer

Professional Regulation Commission (PRC), Manila, Philippines

PROFESSIONAL EXPERIENCES:

Company: AL JUBAIL FERTILIZER (ALBAYRONI) SABIC COMPANY

Jal International Co. Ltd (global manpower)

Position: Field Operation Technician / Assistant Mechanical Engineer

Date Employed: 12/1/2014 t0 12/10/2015

Address: P.O Box 10046 Jubail 31961 KSA

A SABIC Affiliate, Jubail Saudi Arabic

● Follow Safety Health & Environment Management (SHEM) of the company policy at all times.

● Identify Maintenance and other requirements for Plant Operation and communicate with shift Leader/Supervisor.

● Assist and Execute pre-commissioning / commissioning activities together with Commissioning Team as necessary.

● Monitor, Operate and Control continuous operations of Utility and Offsite Facilities consisting of(Water, Steam Boiler, Demineralized Water, Air, Nitrogen, Diesel oil/Fuel oil, Cooling Tower, Cooling Tower, Generators, ETP, in shift from DCS and Field as per written and verbal instructions given by the shift Leader and Superiors.

● Monitor, directs and control all Rotating Equipment Maintenance activities in shop/field as assigned

● Responsible for monitoring all maintenance, testing, modification & project activities especially in complex nature.

● Review and Check on design / drawings / specifications. Recommending improvements in operating conditions and work procedures / standards.

● Executing maintenance activities in coordination with Operations and other departments.

● Participate for PTW for process plant maintenance activities & implementing corrective/preventive actions for smooth/reliable operation of plant and punch clearing work within operation area.

●Personally monitoring maintenance jobs on critical rotating equipment’s & auxiliaries and carry out special / non routine assignments.

● FamiliarizedUsing the computerized maintenance system (SAP / Maximo), orders the spare parts from warehouse and maintains records of all maintenance work completed

● Participate in Start-up & shutdowns, and Turnarounds yearly schedule of the company as per SABIC procedures.

● Performance monitoring of all related equipment & critical process and during Turnaround activities.

● Issue recommendations for ensuring integrity of rotating equipment and static equipment.

● Monitor Inspection schedules and follow-up for compliance of inspection requirements as per relevant company and international standards and procedures.

● Monitor & Maintain Housekeeping at all times and safety & health compliance.

Achievements: DECOMMISSIONING Project of Ammonia Tank Phase 3 & 4, Draining, Inspection and Re-commissioning activities.

●Executing maintenance activities in coordination with operations and other Department.

● Supervises and direct all mechanical jobs and rotating equipment maintenance activities in field / shop as assigned.

● Responsible in supervision and control of all maintenance, testing, pre-commissioning and modification & project activities especially in complex nature,

●Review and commenting on drawings/specification/designedand recommend improvements in operating conditions and work procedures / standards.

Company: PEARL ENERGY PHILIPPINES OPERATING INC.

(Formerly: COVANTA PHILIPPINES OPERATING INC.)

500 MW-GROSS, COAL-FIRED THERMAL POWER PLANT

Operator of QUEZON POWER (PHILIPPINES), LTD. CO.

A 460MW Coal Fired Electric Generating Facility

Brgy. Cagsiay I, Mauban, Quezon, Philippines 4330

Tel. No.:632-***-**** loc. 229/ Fax No.:632-***-****

Reason for Leaving: GREENER PASTURES

Position: Field Operation Technician

Date Employed 26/07/2012 to 15/11/2014

Address: Cagsiay I, Mauban Quezon Phil.

EQUIPMENT HANDLED/AREAS OF RESPONSIBILITY

Water Treatment System (4 Stage MED-Desalination Plant, Mixed Bed Demineralizer, and Condenser Polisher).

1 Tandem-Compound, Single Reheat, Condensing Type GE steam-turbine/generator rated 460MW net.

1 Balanced draft, natural circulation, coal-fired FOSTER WHEELER steam Generator with rated capacity of 3200kpph, 2400psi, 1005 deg Fahrenheit main steam, with single Reheater, and 3-stages of superheaters.

Turbine Lubrication and Hydraulic System.

Generator Gas and Liquid Cooling System.

Condensing System, Feed water and Plant Cooling System.

Air removal/ vacuum System.

Pulverized Coal and Igniter Firing System, Air and Gas System.

Electrical System (Transformer, Circuit Breaker, MCC, load center, Switchyard).

Continuous Emission Monitoring System (CEMS).

Continuous Opacity Monitoring System (COMS).

ABB FLY Ash and Bottom Ash Removal Equipment (ESP & FGD).

2x1.2 MW Diesel-Engine Generator for Emergency Power Source.

Contribute to the achievement of Department objectives of Plant equipment.

Work Details:

Carry out routine preventive maintenance, fault finding, repairs and replacement of Static & Rotating equipment according to schedules, defect reports and check lists for specific equipment requirements.

Assist in planning annual shut down and major equipment turnarounds and carry out complete overhaul of Static & Rotating equipment reassembles and tests equipment in accordance with requirements or tests schedules.

Assist in monitoring and maintenance of Static & Rotating equipment for its healthiness. Adhere strictly to plant safety protocols and proper housekeeping.

Contribute to the continuous improvement by providing suggestions, initiate modifications to improve reliability of equipment process, improve safety, improve maintainability and reduce cost.

Participate actively in major development projects.

Maintain/update the job completion records. Maintain history cards for the Static & Rotating equipment.

Perform technical investigation to determine the root cause of failure. Interact closely with the Shutdown Planning Team and ensure smooth operation.

Responsible for supporting Safety, Environment and Quality policies and programs, and carry out specific duties.

Internal customer satisfaction. No incidents during the performance of maintenance work to people or environment.

Execution of shutdowns within schedule as planned. Maintenance of equipment

Safe attitude at all times and execution of any work performed within Company.

Knowledge sharing with peers and trainees. Continuous improvement driven.

Problems solver& Investigate or fact finding in order to fully understand the issue and consider the most appropriate response.

Achievements: after the completion of one year, I was promoted to Field Operation Tech. from Auxiliary Operation Tech. and become Member of HOUSEKEEPING COMMITTEE.

Company: PORTAVAGA SHIP MANAGEMENT INC.

SHOGUN SHIP COMPANY INC.

Position: Mechanical Engineer (Technical Specialist)

Date Employed: 05/11/2011 to 30/06/2012

Address: Pier 5, South Harbor Metro Manila, Phil.

Work Details

“Dry-dock Conversion of Mt Alysa Isabelfrom LPG to Chemical Tankers”.

Assist in the Project: “Conversion of MT Aliyah from LPG to Oil Tanker”.

Dry-dock of OilTanker Mt Daniella and Tugboats Repair & Overhauled.

● Develop and Implement Rotating Equipment Preventive Maintenance or PMS and discussed proposed changes with the technical manager /group leader.

● Monitoring all Mechanical works of Contractor, Subcontractor in Project Conversion of Vessels: Oil tanker, Chemical Tanker LPG etc.

● Lead Installation, commissioning and startup of the specific rotating machinery as per company policies.

● Carries out site investigation work as assigned by the Sr. Engineer /Group leader and report’s finding to the group leader.

●Ensures that all maintenance work is carried out in accordance with the safety procedures and plant operational requirements.

● Monitor implementation of safe maintenance works at all times. Inspect quality ESHat all times. Supervise Engine products Discharging Parameters during product unloading to oil tank farm.

● Line checking and Punch listing as per P&ID and Isometric Drawing before the pressure test on completed pipe lines.

● Witnessed Pressure testing (Hydro /Pneumatic) activities. Line checking / calibrations and testing of equipment’s.

● Completion of QC site instructions and coordinate their closure of Punch list and box up.

● Verification of closed punch items and conduct walk through for each completed piping system (test package) prior to pressure testing activities.

● Check Piping / Supports Installation, Gallery Steel / Structural Damage, Tripping hazards etc..

● Check, Inspect gaskets, supports, valves prior to line reinstatement acceptance as per latest isometric drawings for construction, code and specification standards.

● Assist the concerned marine superintendents in determining the Performance of the complement of all vessels. (Oil tankers, LGP tankers and crude Oil Tankers and Chemical tankers)

● Assist the Marine & Technical Managers in preparing all vessels, officers, and crew for Oil Terminal Inspection, Sire as well as ISPM/ISPS Inspections and Audit.

● Facilitate the Operational and Administrative requirements of the vessels particularly all vessel requisitions, SIRE Inspection requisites, Rectifications on SIRE findings and Conduct necessary emergency repairs.

Company: PEARL ENERGY PHILIPPINES OPERATING INC.

QUEZON POWER PHILIPPINES LIMITED CO.

500 MW-GROSS, COAL-FIRED THERMAL POWER PLANT

Position: Preventive Maintenance(CONDITION MONITORING MAINTENANCE)

Date Employed 04/2010 to 06/2010 (300HRS)

Address: Cagsiay I, Mauban Quezon Phil.

● Follow Safety Health & Environment Management of the company policy at all times.

● Actual Inspection as per schedules for compliance of inspection requirements as per company and international code & standards procedures

● Participate in day to day monitoring and inspection of the predictive maintenance.

● Participate in the Plant Maintenance activities & implementing corrective/preventive actions for smooth/reliable operation of plant.

● Ensuring stand by equip. availability by good monitoring techniques implementations.

●Hands-on checking and participate in the analyzing of data from field. Like vibrations, thermal temp.data, oil analysis sample collections and thickness gauging etc.

EDUCATION:

COLLEGE: (2006-2011) Bachelor of Science in Mechanical Engineering. (BSME)

Southern Luzon State University (SLSU), Brgy.Kulapi, Lucban Quezon

SECONDARY: (2001-2005) MAUBAN SCIENCE ORIENTED HIGH SCHOOL, 5THHonorable Mention

Brgy. Bagong Bayan Mauban, Quezon Philippines

ELEMENTARY: (1996-2001) MAUBAN NORTH ELEMENTARY SCHOOL II (Grade 1-6), 5TH Honor

Enverga Boulevard St. Mauban, Quezon Philippines

TECHNICAL TRAININGS & CERTIFICATION:

Company: Quezon Power Philippines Lim. Co.

Pearl Energy Philippines Operating Inc

● Seven Habits of Highly Effective People, Seminar and Training (Franklin Covey)

● Basic Occupational Safety and Health (BOSH-40 hrs.)

● Basic Oil Spill Training & Drill Refresher

● Fire Brigade Basic Training & Drill

● First Aide Basic training & Drill

Company: PetroEra One Workshop Center

● Shaft Alignment of Mechanical Plant Equipment,

Covered the ff; Shaft alignment of mechanical rotating equipment, importance and safety

Basic shaft alignment system, set-up & simulated hands-on in real time using the rim & face and reverse dial indicator method were practiced using tools and actual set of equipment.

Company: Lucena Manpower Skills Training Center (Accredited by TESDA)

● Auto-Diesel& Gasoline Mechanic- (200hrs)

● Refrigeration & Air-conditioning - (200hrs)

TECHNICAL SEMINARS ATTENDED:

● “Central Lubrication System, Erosion Wear Protection, Application Wear Protection, Safety Engineering Equipment”

● “Splicing and Jointing of Conveyor Belt, Re-Aligning of conveyor belt, Proper Attitude is a key to success”

● “Hydro-electric Power Plant and M.E Board Exam Orientation”

● “Bearing Technology, Permit to Work System”

● “Mechanical Engineer: Profession for Local and Abroad”

Sex

:

Male

Date of Birth

:

October 10,

Civil Status

:

Single

Place of Birth :

Lucena City

Citizenship

:

Filipino

Height

:

172 cm.

Passport No. :

EB5197268

Weight

:

65 kg.

License (PRC Reg. No.)

:

RME -0077678

Father’s Name

:

ELIZARDO PARAY VILLALUZ (Security Guard)

Mother’s Name

:

CHITA SY VILLALUZ (Housewife)

PERSONAL DATA:

Languages/Dialects:English (proficient, oral &written)

Arabic (basic, oral)

Filipino, (Native Dialects)

REFERENCES:

AYED D. AL-QAHTANI

Shift Manager-Utility

Al-Jubail Fertilizer Company A SABIC Affiliate

P.O Box 10046, Jubail 31961 Saudi Arabia

acs161@r.postjobfree.com

EDUARDO GOMEZ NAVALES

Unit 2925, Tower 3, MEZZA Residences 8005 Guirayon St.

Aurora Blvd, Brgy. Dona Imelda 1113 Quezon City, Philippines

+669-********* (@ Saudi Arabia.)

acs161@r.postjobfree.com

ENGR. RENE DELES

Safety Training Manager Quezon Power Plant Ltd. Co.

Cagsiay I, Mauban Quezon Phil.

+639*********

Contact this candidate