Project Engineer

MANIVEL YESAIYAN

PMP, FS Eng (TÜV Rheinland, #***6/ 14, SIS)

acryms@r.postjobfree.com

Cell : +919********* / +919*********

Overview A well presented and pro active Senior Project Engineer who has a relentless drive to have a broad impact rather than just deliver results. Possessing vast experience of coordinating and managing project activity, providing clear guidance and leadership to a team and ensuring that all legislative requirements are fully met. A competent Master Degree professional with 11 years of work experience in which 7 years of work experience in Automation, Control and Safety Instrumentation System in oil and Gas sector (extensively worked on DeltaV SIS and DeltaV DCS, Project Management, Detail Engineering, Commissioning, Start up and Site Support) Skilled in a variety of areas from estimation through to design completion, including conducting FAT, SAT, SIT and commissioning and Start up.

Skill Summary Technical:

Review of Technical/Commercial offer and prepare table of compliance.

Review of P & ID, Logic Diagrams and preparing I/O database and SIF tables.

Preparation of Functional Design Specifications.

Experience in DeltaV DCS version 9.3, 10.3 and 11.3.

Application Software Development for Sequence Control, Close Loop Control, Process Graphics, Shutdown System, Fire and Gas System, Interlocks and protection systems.

Vendor support and co ordination with the procurement team.

Preparation of Instrument data sheets, I/O wiring diagrams, Cabinet GA, IA drawings, System Architecture, Cable schedule, BOM etc.

Hands on experience in OPC, Ethernet, TCP/IP and Asset Management System.

Hands on experience in Foundation fieldbus, HART protocols, Profibus and serial communication.

Fisher Control valves, Actuators and Valve positioners (DVC).

Preparation of project test procedures as per the validation need of the project.

Testing of the configuration against validation documents for each loop and module.

Hands on experience in conducting FAT, SAT and SIT.

Commissioning DeltaV PAS and SIS system and Start up of the plant.

Hands on experience in OMNI Flow computer based metering Skid.

Knowledge on HAZOP and SIL determination

Knowledge on IEC61508 & IEC 61511, ISA84 standards.

SIS verification and validation as per SRS.

Project Management:

PMI Practitioner

Participate in project kick off meetings during project define phase.

Preparing scope of work, Project Execution Plan, Quality Plan and scheduling of activities.

Resource Planning, forecasting and hours tracking.

Project coordination between resources, customers/clients/project management & team.

Assist PM in MOC.

Project closeout and handover activities.

Career

AOS Orwell Ltd Nigeria. Nov 2011 – Oct 2014

Senior Project Engineer

Responsible for estimating the work to be done, identify dependencies, critical path activities, & the resources needed for each project.

Define project scope, objectives, milestones and deliverables.

Pro actively manage project risks and issues and minimize their impact on the project.

Regularly communicate project expectations to team members and use their feedback to optimize progress.

Coordinate & manage project reporting, reviews and project steering meetings. BONNY RIVER TERMINAL metering system upgrade Project Customer: Mobil Producing Nigeria Unlimited

Involved in Project Initiation, Kick Off meeting etc.

Created Project Planning, Schedule and WBS creation.

Involved in Project Execution like conceptual design of System Architecture, Cabinet Layout, System Sizing etc.,

DeltaV 6.3 to DeltaV 11.3 up gradation

Graphics and Logic development for the metering system.

Configured and programmed OMNI flow computer.

ADIBAWA AG Project

Customer: Shell Petroleum Development Company (SPDC)

Involved in Project Initiation, Kick Off meeting etc.

Created Project Planning, Schedule and WBS creation.

Involved in Project Execution like conceptual design of System Architecture, Cabinet Layout, System Sizing etc.,

Conducted FAT.

BONNY Associated Gas Plant Project – Nigeria.

Customer: Shell Petroleum Development Company (SPDC)

Involved in Project Execution, Monitoring & Control and Project Closure.

Developed Library Class based modules & Developed Faceplates and Displays

Generate Technical Quires.

Developed IO database

Developed PAS and SIS logic in DeltaV ver 11.3

Reviewed System Architecture, FDS and loop drawing.

Preparation of Change of Scope document and BOM

Conducted FAT, IFAT, and Commissioned DeltaV PAS and SIS hardware.

Loop checking and Functional testing of all the open loop and closed loop in PAS and Shutdown logic functional test.

Plant commissioning, Start up and Handover of the Project. ALAKIRI Associated Gas Plant Project – Nigeria.

Customer: Shell Petroleum Development Company (SPDC)

Involved in Project Planning, Execution, Monitoring & Control and Project Closure.

Developed Library Class based modules and Developed Faceplates and Displays

Generate Technical Quires.

Developed IO database

Developed PAS and SIS logic in DeltaV ver 11.3

Reviewed System Architecture, FDS and loop drawing.

Cause and Effect for SIS and FGS review.

UTOROGU Non Associated Gas (NAG2) Plant Project – Nigeria. Customer: Shell Petroleum Development Company (SPDC)

Involved in Project Planning, Execution, Monitoring & Control and Project Closure.

Developed Library Class based modules & Developed Faceplates and Displays

Generate Technical Quires.

Developed IO database

Developed PAS and SIS logic in DeltaV ver 11.3

Reviewed System Architecture, FDS and loop drawing.

Cause and Effect for SIS and FGS review.

SIS Logic development for SIS and FGS.

Previous Employers

Almeer Technical Services Co W.L.L Chennai. India Jun 2008 – Oct 2011 Control System Engineer

Worked as Control System Engineer responsible for Control Systems (DCS) / SCADA related activities such as project execution, configuration and engineering services and project site support services activities for “System & Solution Division”. Coromandel International Ltd (Fertilizer plant)

Involved in Project Initiation, Planning, Execution, Monitoring & Control and Project Closure.

Detail Design and Commissioning activities for SAP 1,SAP 2, APS and PAP plant.

Logic and Graphics Development

Loop checking, SAT and commissioning activities & Startup of the plant. Reliance India Limited Dahej Gujarat

Logic and Graphics Development

Loop checking.

Conducted SAT and commissioning activities.

Startup of the plant.

TOTAL E&P PORT HARCORT NIGERIA POWER GENERATION

Review of P&ID, IO List preparation, IO channel and Card allocation

Preparation of BOM, System Architecture, FDS, ICS, Instrument Datasheet

Logic and Graphics Development

SIS Implementation with DeltaV DCS and Knowledge on IEC 61508 & IEC 61511

Commissioning and Startup of the plant.

NTPC Simhadri Station 2x500 MW . (Ovation DDCMIS)

Experience in installation & configuration of Ovation DCS server & Engineering stations

Experience in Ovation Hardware (Controllers, I/O Modules, Server, Historian station)

I/O channel Allocation, ICS preparation, according to ICS Marshaling Schedule preparation.

Heat and Power calculation for Ovation system

Relay and Marshaling Panel Allocation for Ovation system

Preparation of BOM

ISPAT – 125MW Power Plant

Preparation of IO lists & System Configuration based on P&ID.

Developed logics based upon Control philosophy.

Generated typical graphic elements by analyzing P&ID.

Conducted Hardware FAT by installing Engineering Station, Operator Stations and performed Loop checks for Deltav10.3 System.

Generated Loop Sheets.

Report generation using DeltaV History reporter. Estimation and Proposals Prepared for DCS portion

LGMS1, 2, 3&4 for Kuwait Oil Company.

Installation of New compressor at GC 7, 8 & 21 for Kuwait Oil Company. Shanmuganathan Engineering College, INDIA June 2004 – May2006 Lecturer

Worked as Lecturer in Electrical and Electronics Engineering Department. Eddy Current Controls (I) Limited Coimbatore. India. June 2002 – April2004 Graduate Engineer Trainee

Worked as Electrical engineer responsible for the design and implementation of eddy current clutch for the variable speed drive requirement. Fully involved in the design, installation and commissioning based on the client requirement.

Academic

Anna University Chennai, Madras Institute of Technology 2006 2008 ME in Instrumentation Engineering. Grade: 8.0 CGPA Madurai Kamaraj University, PSNA College of Engineering & 1999 2002 Technology Grade: 72.31%

BE in Electrical and Electronics Engineering

Maruthi Polytechnic College, Attur, Tamilnadu, India 1996 1999 Diploma in Electrical and Electronics Engineering Grade: 90.63% Safety Training

Helicopter Underwater Escape Training HUET and Survival at SEA. Certifications

TUV Functional Safety Engineer

PMI Project Management Professional

Membership

ISA Member

PMI Member

Computer Skills

Languages : C, VB

Databases : MS ACCESS

Operating system : Windows7/Server2008/Server2003/XP Packages : MSOFFICE2010, MSProject2010, MS Visio 2010, ACAD 2010 Personal Details

Nationality : INDIAN

Date of Birth : 28 March 1980

Sex & Status : Male & Married

Languages : Tamil, English, Hindi

Passport No. : H1751063 Valid up to 27/11/2018

Communication : 5 /79A, Sindhu Nagar,

Address Ramasamy Nagar East,

Udumalpet, Tamil Nadu, India 642126

DECLARATION

I hereby declare that all the above given information are true to the best of my knowledge. Place: India Y.Manivel

Date:

Certificate

FS Eng (TÜV Rheinland)

Functional Safety Engineer (TÜV Rheinland)

Application Area Safety Instrumented Systems

ID-No. # 9546/ 14

Certificate Owner Manivel Yesaiyan

India

Course Provider Yokogawa Europe B.V.

Training Contents Process Safety Risk / Layers of Protection International Safety Standards, Regulations, Enforcement Safety Integrity Level (SIL) Assignment Methodologies Safety Requirement Specifications (SRS) Development Safety Integrity Level (SIL) Verification Methodologies Management of Functional Safety

SIS Design and Good Engineering Practices

Issue Date December 2014

Expiry Date December 2019

Validity This certificate is valid for 5 years.

Cologne, December 2014 Dipl.-Ing. Heinz Gall

TÜV Rheinland

Industrie Service GmbH

Automation and Functional Safety

Am Grauen Stein

51105 Cologne - Germany

Head of TÜV Rheinland Functional Safety Program

Contact this candidate