Yonis.M.Yonis Buswig (+**) – ** – ******* acry83@r.postjobfree.com

Dear Sir/Madam,

APPLICATION FOR ELECTRICAL ENGINEER,

I am interested in applying for the post of an electrical engineer in your company. I believe that my abilities and experiences will enable me to be a creative and innovative lecturer. I ask for this opportunity because my professional experience and skills closely parallel with the needs of your company, in particular, electrical engineering department.

I have a good background in simulation and hardware designing in both fields of Power electronic and Energy conversion applications. Apart from being a proactive learner, I was actively involved in extracurricular activities during my studies. Furthermore, during my Master’s degree, I gained great experiences of renewable energy and power converter control techniques and management by working on the topic of Development of a DC-AC power conditioner for wind generator by using neural network.

I started my Ph.D under the supervision of Dr. Wahyu Mulyo Utomo in November 2011. I have successfully completed my thesis with the title of “Development of A Double-Input Interleaved Boost DC-DC Converter Using Neural Network Control” .I have successfully studied and developed a method to solve the problems of high current ripples and output voltage regulation based on interleaved technique and neural network control. These are among the most significant contributions of my Ph.D study.

My enthusiastic involvement in many activities outside of the academic circle has served me well in nurturing my leadership and communication skills, which are essential to succeed in the working world. I believe that you will find additional information in the attached CV that further demonstrates my capability as a candidate for this position. Please consider me as a person who is looking for a chance to show his ability. If you require more information, please do not hesitate to contact me. I look forward to hear from you.

Yours faithfully,

Yonis.M.Yonis Buswig

Researcher

Personal Details

Yonis.M.Yonis Buswig

Address

Address

: Number 9- jalan limau 9- Taman Sedap- Parit Raja.

City

: johor-86400 Parit Raja

State

: Johor

Country

: Malaysia

Tel (Mobile, Malaysia)

: 006-017-6048510

Emails

: acry83@r.postjobfree.com

Personal Particulars

Age/Gender

: 30 years / Male

Nationality

: Libyan

Marital Status

: Single

Passport No

: 355369

Educational Background

1. Level

: Doctor of Philosophy (Electrical Engineering)

Major

: Electrical Power Engineering (power electronics & Energy Conversion System)

Duration

: 2011-2015 (currently the final thesis has been submit)

Project Title

: Development of A Double-Input Interleaved Boost DC-DC Converter Using Neural

Network Control.

Name of Institution

: Universiti Tun Hussein Onn Malaysia (UHTM)

Location

: Parit Raja, Johor, Malaysia

2. Level

: Master of Electrical Engineering

Major

CGPA

: Electrical Engineering (Power)

: 3.63

Duration

: 2009-2011

Final project

: Development Of A Dc-Ac Power Conditioner For Wind Generator By Using Neural

Network

Name of Institution

: Universiti Tun Hussein Onn Malaysia (UTHM)

Location

: Parit Raja, Batu Pahat- Johor, Malaysia

3. Level

: Bachelor of Electrical Engineering

Major

: Electrical Engineering (Power)

Duration

: 2003-2008

Subjects

: Fundamental of Electrical Engineering, Electronics(1,2,3), English for Academic, Computer Programming, Electromagnetic (1,2), Communication Engineering, Mathematics (1,2,3,4) Electrical Circuits (1,2), Electrical Measurements, Thermal Dynamics & Power Station, Electromechanical Energy Conversion, Digital Systems, Electrical Machines (1,2), Power Engineering(1,2), Numerical Analysis, Thermal Engines, Control Systems (1,2), Power System Analysis (1,2), Microprocessors, Fluid Mechanics, Advanced Power Electronics, Power System Protection, High Voltage Engineering, Computer Application in Power Systems.

Final project

: A water pumping control system with a programmable logic controller (PLC)

Name of Institution

: Omar Al-Mukhtar University

Location

: Al-Bida – Libya

Teaching Experience

2012 Teaching Assistant (TA), Prof. Madya Dr Zainal Alam Bin Haron “Power Electronics Lab “,Universiti Tun Hussein Onn Malaysia, 2012.

2013 Teaching Assistant (TA), Dr. Wahyu Mulyo Utomo " Advanced Machine Lab", Universiti Tun Hussein Onn Malaysia, 2013.

2014 Teaching Assistant (TA), Dr. Wahyu Mulyo Utomo “Advanced digital signal processing (DSP) Lab", Universiti Tun Hussein Onn Malaysia, 2014.

Working Experiences

Engineer

Research Assistant

Full-time Lecturer

Part-time Lecturer

Noon Engineering Bureau Consulting Engineers (2007 – 2009) Al-bida, Libya

Department of Electrical Power Engineering, Faculty of Electrical Engineering Omar Al-Mukhtar University, Al- Bida, Libya. (2009-2010).

Department of Electrical Power Engineering, Faculty of Electrical Engineering Omar Al-Mukhtar University, Al- Bida, Libya (2009-2010).

Higher Institute Of Electrical And Electronics Al Bidaa, Libya (2008-2010)

Responsibilities

Senior Researcher.

Software Designer.

Teacher.

Administrative Duty.

Language

: Arabic ( Mother Tongue )

English ( Fluent )

Skills

Knowledge in computer programming and hardware microcontroller devices such as:

• MATLAB Simulink software

• LabVIEW Software

• PSCAD – The Electromagnetic Transients Software

• dSPACE - DS1103 PPC Controller Board

• eZdsp F2808 microcontroller c - C2000 DSP Development Tools

• TMS320F28335 Delfino Microcontroller DSP Development Tools

• Arduino Uno microcontroller

• Fuzzy Logic control technique

• Neural Network control technique

• PID control technique

• C++ programming language

• Experience with all equipment in lab such as( Tektronix Digital Oscilloscopes all

types, digital voltmeter, voltage and current measurements)

• PROTEUS PCB design software

• MULTISIM PCB design software

• Printed Circuit Board (PCB) development

• Microsoft Office

Strengths

Professional at algorithm making, Time management skills, Independent, Sense of

Responsibility, Adaptable to new environment, Willing to learn and able to cooperate

well.

Extracurricular Activities

• Member of the University Football Team (2009-2015)

• President of the sports activities for the international students (2011-2015)

• Committee Member of Graduate Student Association in Universiti Tun Hussein Onn

Malaysia (2011-2015)

Publications

All the proceeding papers have been published related to this research are stated as follow:

[1]- National Conference on Electrical and Electronics Engineering (NCEEE 2012), 2012, Batu Pahat, Malaysia “Development of Single DC-AC Power Conditioner for Wind Generator by Using Neural Network”

[2]- 5th International Conference on Postgraduate Education ( ICPE ), 2012, Johor, Malaysia “Multi-Input Interleaved Converter for Hybrid Renewable Energy System”

[3]- Malaysian Technical Universities Conference on Engineering and Technology (MUCET), 2012, Perlis, Malaysia “Averaged Modeling of An Interleaved Boost Converter in Continuous Conduction Mode”

[4]- Malaysian Technical Universities Conference on Engineering & Technology (MUCET) 3-4 December 2013, Kuantan, Pahang “Derivation of New Multi-Input Converter Using H-Bridge Cells”

[5]- International Conference on Nanoscience, Engineering and Management-BOND21 (August, 2013) “New Multi-Input Converter for Hybrid PV and Wind Generator Systems”

[6]- The 2nd Power and Energy Conversion Symposium (PECS 2014), 12 May 2014, Universiti Teknikal Malaysia,Melaka “State-Space Derivation of an Interleaved Boost converter”

[7]- The 3rd International Conference on Computer Engineering & Mathematical Sciences (ICCEMS 2014) “Modeling of A New Modified Multi-Input Interleaved Boost DC-DC Converter”

All the journals papers have been published related to this research are stated as follow:

[1]- International Journal of Computer Technology and Electronics Engineering (IJCTEE), Vol 1, Iss 3, Pp 108-113 (2011) “Voltage Tracking of a DC-DC Buck-Boost Converter Using Neural Network Control”

[2]- International Journal of Power Electronics and Drive System (IJPEDS), Vol 2, No 1, March 2012 “Voltage Tracking of a DC-DC Flyback Converter Using Neural Network Control”

[3]- Advanced Materials Research VoL 923 (2014) pp 619-624 Online available since 2014 April ’17 at www.scicntiflc. Net C (2014) Tran Tech Ththlications. Switzerland “Multi-Input Boost Converter for Hybrid PV and Wind Generator Systems”

The journal papers waiting for acceptance:

[1]- “Modeling of A New Modified Multi-Input Interleaved Boost DC-DC Converter” ScienceAsia, Journal of The Science Society of Thailand (first revision)

[2]- “ANN Power Sharing Controller for A New Multi-Input Cascaded H-Bridge Based Interleaved Boost Converter” Journal of Mathematics and Computers in Simulation

References

Prof. Madya Dr Zainal Alam Bin Haron

Department of Electrical Power Engineering,

Faculty of Electrical Engineering,

Universiti Tun Hussein Onn Malaysia,

Parit raga, Johor Darul Takzim

Tel: 0060-111-0618287

e-mail: acry83@r.postjobfree.com

Dr. Wahyu Mulyo Utomo

Department of Electrical Power Engineering,

University Tun Hussein Onn Malaysia.

Parit raga, Johor Darul Takzim

Tel: 006*-**-*******

acry83@r.postjobfree.com

Contact this candidate