JOEL P. MARTINEZ
Address: **A Hamilton road
Hamilton hill WA 6163
Mobile Nos: 044*******
Email: acrxv1@r.postjobfree.com
CAREER OBJECTIVE:
To Apply for Position as a First Class welder where I can fully contribute and utilize my knowledge, experience and capabilities.
PROFICIENCY IN WELDING:
Implement welding rules depends on the standard class required. Perform welding in any position using GMAW(Gas metal arc welding), FCAW(Flux cored arc welding), MIG(Metal inert gas) and SMAW(shielded metal arcwelding). perform testing of butt joint to prove the quality of welding and certify tightness.
WORK EXPERIENCES:
UI PROJECT WA PTY LTD.
Address: 36 stuart drive Henderson WA 6166 po box 4122 business center WA6960 telephone: {08}94105600
Position: first class welder
EMPLOYER: GAY GALATE
From: July 7,2014 up to present company closed
JOB DESCRIPTION: 1}. before work my supervisor to call in our tollbox meeting they said what to do there the defferent designated work area.
2}. before and after work clean the work place
3}.I weld all position using SMAW/FCAW/MIG and metal core
4}.I do everything what they said my supervisor related to my job
5}. I weld shout
6}.I weld the pipe using stick weld and FCAW
7}.I weld the conveyor.
while working in united industries my company to assigned me to the other company EVT-JV WHEATSTONE PROJECTS {LNG}
JOB DESCRIPTION: 1. free start or toll box meeting regarding in our task and safety on job
2} make a start card to what to do in our work place
3]. before start weld make sure the work place you put the barricade to distinguish we have work above.
4}I certified all position using the stick weld or f-_caw
5} I weld the compressor bar
6}. I weld the shell plate side of the tank
7} I weld the roof of the tank
8} I weld the 26 butt joint for x-ray testing then I will pass the test.
Position: first class welder
From: July 8, 2014 up to present
Job Description;
• I weld the box column
• I weld the frame and conveyor, shute
• I perform my task in any position that my supervisor assigns me
MANUELE ENGINEERS PTY LTD
Address: 240-280 Morphett R.d North Plympton SA 5037
PHONE;8414-2000 FAX: 84142050
Contact Person: VINCE MANUELE / Operations Manager
Position: First Class Welder (SMAW/GMAW/FCAW/MIG)
From: September 20, 2012 up to June 2, 2014
Job Description:
• Perform welding in any position using GMAW(Gasmetal arcwelding),FCAW(flux cored arc welding) and SMAW(Shielded metal arc welding)perform testing of butt joint to prove the quality of welding and certify tigthness of structure.
• Full weld steel plates according to sizes.
• To be able to satisfy customer's through everyone's continuous effort in achieving our works and target output.
• Setting up of jig to make more convenient and consistent and accurate the fabricating and assembling of steel assemblies.
• Operate machine apparatus such as gas cutting, grinding, gauging and oxy-acetylene
• To weld the box cullomb parts of adelaide oval.
• To weld the pipe.
• I can weld any possition using SMAW,MIG and FCAW.
• Maintain good housekeeping and organize work for good environment
Notable Client Projects:
• Adelaide oval
• Adelaide electrification
• Liebherr
• Adelaide airport
GADALETTA STEEL FABRICATION (SA) PTY. LTD.
Address: 148 12 Wattle street Port pirie SA 5540
Tel. No: (08)86330996 Fax. No. (08-886******
Contact Person: Mr. Sam Gadaletta /owner
Position: First Class Welder
From: March 23, 2012 to July 12, 2012
Job Description:
Operator of Welding Machine (GMAW) Gas Metal Arc Welding (MIG-FCAW) and SMAW
Fabricating and Assembling various Structural and Mechanical Steel Assemblies such
as columns, beams, truss frames, stair, braces, miscellaneous items based from the
given shop drawings.
Setting-up of jig to make more convenient and consistent and accurate the fabricating
and assembling of Steel Assemblies.
Operate machine apparatus such as gas cutting, grinding, gauging and oxy-acetylene
Quality checking of assemblies done before it is submitted for final checking by the
Fabrication Manager or Quality Control Inspector.
Maintains good housekeeping.
.
SHIN KURUSHIMA TOYOHASHI SHIP BUILDING
Address: 22 Akemi-chu Toyohashi Aichi-ken Japan
Position: Structural and Pipe Welder
From : November 28, 2007 to November 23, 2010
Job Description
• I start my work using the 5's before and after working hours.
5S is a reference to five Japanese words that describes standard cleanup. Seiri means tidiness, Seiton means orderliness, Seiso means cleanliness, Seiketsu means standards and Shitsuke means sustaining discipline.
• Work in unfinished pipes and stainless pipes in the fabrications.
• Doing welding jobs following japan welding standards (Nippon Kaiji Kyokai)
• I always check the pitter before starting welding.
• I used ceramic especially to groove joint welding.
• To weld the bracket .To weld the black iron.To weld the galvanized iron.
• Focuses on elminating unnescesarry items from the working place.
• To concentrate on standard and quality weldding with standards and specifications.
• From my experience working in japan i learned handling semi automatic welding machines.
KEPPEL BATANGAS SHIPYARD
Address: San Miguel Batangas Philippines
Position: Welder ( FCAW MIG and SMAW welding machine)
Date : November 13, 2006 to June 17, 2007
Job Description:
• I can be placed in any position to weld the starboard
• To weld the brackets 10mm x 300cm x 570 cm
• I can be placed in any position inside and outside the board.
• Before welding the butt joint I use the ceramic.
• Before welding the head cheel I used the heating pod measuring 2 inches thic
SAN TIMOTEO MOTOR WORKS
Address : Brgy. Isabang Lucena City
Position: Welder
Date: February 26, 2005 to September 23, 2006
JOB DESCRIPTION:
• To fabricate the underchases.
• To fabricate the steel trusses
• To fabricate the steel window.
• Measure correctly for exact layout.
• Can supervise and coordinates to the implementation of welding works.
• To be able to check the mechanical trouble of the welding machine.
• To be able to understand the proper handling of tools.
• Prepare the equipment and layout of particular motor and steel product.
• To be able to satisfy the customer’s through everyone’s continuous effort in achieving our works and target output.
• San Timoteo Motor Works are commited to be the manufacturer that is worth getting all customer gratitude. All staff members of San Timoteo Motor Works are committed in unity to provide the customer with dwelling space through continuous improvement in industrial technology and quality management system.
Wukung(s) PTE LT D.
Address: Rosario Cavite Epza
Position: Full Welder Date: June 10, 2003 to August 17, 2004
JOB DESCRIPTION:
• To weld the I Beam.
• To assemble the footing.
• To fabricate the special project.
• To cut the square pipes.
• To assemble the frame.
• To fabricate the sample product.
• To fabricate beam
• Maintain the machines good condition and to minimize the breakdown of machine as to production.
• Correct measure and exact layout completion of preventive non destructive weld.
• To meet their target output.
• The production SV/TL will sign the completion of preventive welding check-up of work.
• As an employee of Wukong (s) PTE LTD. I had an opportunity to coordinate and interact with the various people working on the said company.
• I had also given a responsibility of analyzing simple plans and blue prints pertaining to welding and fabrication and assist in the inspection and testing of welded structure using non destructive test.
• I was also tasked to do various welding, and fabrication of welding standard and specification.
Materials/Tools/Equipment Used:
• SMAW (Shielded Metal Arc Welding)
• MIG ( Metal Inert Gas )
• FCAW ( Flux Cord Arc Welding)
• GMAW ( Gas Metal Arc Welding )
• Gas cutting
Seminar/ Training / Achievements / Certification Information
October 11, 2004 : Boiler Tubes Protection using thermal spray
Conducted by Philippine Society Lucena
Chapter, held at city Antigua Lucena City.
March 6-7 2004 : Basic Hydraulics and Pneumatics conducted
By Southern Luzon Polytechnic College new Lucena
City Hall Annex Lucena City
November 20, 2009 : 2nd Placer during welding contest in japan
Educational Attainment
Education Yr – To School/Address Course
College
Vocational
2001-2005
Southern Luzon Polytechnic College
Lucena City
3 year Diploma of Technology
Major in Welding and fabrication technology
High School
1997-2001
Quezon National High School Brgy. I Ibabang Iyam
Elementary
1989-1995
West IV Elementary School Brgy. V Lucena City
LICENSES/CERTIFICATION
License/Certification License/Certification No. Date
3rd Class National Certificate: Certificate no. 030*********
For electric Arc Welder
Welder’s Qualification For Carbon Steel Certificate No. W E 09NG 20
Welder and Welding Operator Qualification test Record PER ASME IX