Willie P. Davis

***** ****** ****** ****** ** ***42

H: 408-***-**** email: acrt5c@r.postjobfree.com

CAPA-ENGINEERING MANAGER OR CAPA-TEST ENGINEER

CAPA (Corrective Action \ Preventive Action)

* Quality NPI Engineer * SMT 1.0”, 2.5” and 3.5” Manufacturing /Clean Room quality repair

* Box Build Test Engineering * TL9000 \ ISO 9001 \ ISO 13485 \ ISO 14000 Compliance Quality Engineer

* New Product Introduction * OEM System Integration * Support – OEM Customer; Product Field Engineering

* Test Engineer * Logistic International vendor equipment procurement Engineer * CAPA non-conformances

An accomplished CAPA Engineer professional with a focus on product quality development in both manufacturing

And System usage. Self-motivated with the ability to effectively work with others in various coordinate disciplines, on multi-national teams. Recognized by management, peers and customers as a tremendous asset to any organization demonstrating leadership, integrity and a high level of commitment to quality, speed and progress in an attempt to achieve total customer satisfaction.

AREAS OF EXPERTISE:

* Microsoft Project 2000/EXCEL * In-Depth System Test Process * Test System Integration

* Product Clean Room * IPC-A-610D Acceptability of Elect. Assy * SAP Data Management

* TL9000 auditor * Quality Management System Processes * Team PACK certified * Manuf. Process Instructions * ECN/Deviation/RFA release * Agile * Corrective/Preventive Actions (CAPA) Test Plans

PROFESSIONAL EXPERIENCE:

Benchmark Electronics lnc 5505 Hellyer Ave, San Jose, CA

Senior Quality Engineer/Scientist December 2009 to Present

Responsible for measuring and analyzing the quality of the final product, maintaining the control of the process. Informs the customers about the advances and improvements made to the SMT process in order to achieve the full development of the product via a continuous Quality improvement.

Principle Responsilities:

Lead and guide a group of QA Leaders/Inspectors in inspecting and controlling the processes and products

quality during the NPI and mass-production in accordance with the specified TL9000/IPC-A-610D standards.

Ensure the line leaders and inspectors perform quality control activities according to the Quality Plan, and guide

them in the interpretation of process and product quality specifications. Coordinate and enforce engineering

change/production part approval process. Coordinate ESD requirements and review ESD compliance

with customer/internal staff. Coordinate and execute Manufacturing System Verification Daily Audit and

maintaining the system conformity to exceed customer requirement . Review and compile the trend/improvement

analysis and report the status to Quality Account Manager. Ensure product meets Safety Regulatory

Requirements. Supervise and initiate Corrective/Preventive actions plans for out of control situations and

implement continuous Quality improvement activities. Identify, develop, and report QMS metrics. Ensure

product/material nonconformity, including that suspected product/material is disposed in a timely manner.

Conduct System test, RAS test and quality training using Engineering released documentation and maps.

Page 1 of 3

Willie P. Davis

CAPA-ENGINEERING MANAGER OR CAPA-TEST ENGINEER

Flextronics International 2243 Lundy Ave, San Jose, CA

Staff Quality Engineer/Scientist January 2007 to August 2008

Responsible for measuring and analyzing the quality of the final product, maintaining the control of the process. Informs the customers about the advances and improvements made to the SMT process in order to achieve the full development of the product via a continuous Quality improvement.

Principle Responsilities:

Lead and guide a group of QA Leaders/Inspectors in inspecting and controlling the processes and products

quality during the NPI and mass-production in accordance with the specified TL9000/IPC-A-610D standards.

Ensure the line leaders and inspectors perform quality control activities according to the Quality Plan, and guide

them in the interpretation of process and product quality specifications. Coordinate and enforce engineering

change/production part approval process. Coordinate ESD requirements and review ESD compliance

with customer/internal staff. Coordinate and execute Manufacturing System Verification Daily Audit and

maintaining the system conformity to exceed customer requirement . Review and compile the trend/improvement

analysis and report the status to Quality Account Manager. Ensure product meets Safety Regulatory

Requirements. Supervise and initiate Corrective/Preventive actions plans for out of control situations and

implement continuous Quality improvement activities. Identify, develop, and report QMS metrics. Ensure

product/material nonconformity, including that suspected product/material is disposed in a timely manner.

Conduct System test, RAS test and quality training using Engineering released documentation and maps.

IBM Storage System Division 5600 Cottle Road, San Jose, CA

Product Test Engineer -Advisory Engineer/Scientist January 1996 to December 2006 Retired

World Wide – Mobile, Server, Desktop, Enterprise

Establish general Test systems and RAS test cases to evaluate performance and system diagnostics. To also

detect, solve and prevent problems on the production processes. Establish continuous improvement programs,

focusing on customer requirements. Develop test plans covering performance goals from engineering and RAS

specifications. Establish Corrective/Preventive actions (CAPA), analyzing the results of previous actions to verify

functionality, keeping the management and engineering informed about the results . Monitor quality certifications

in order to exceed customer requirements.

IBM Corp. 5600 Cottle Road, San Jose, CA

IBM Sales Manager - Advisory Engineer/Scientist June 1995 to January 1996

Project Engineering Manager – Sales of GMR heads and Head Stack Assemblies

Provided technical and product launch for OEM i.e. Western Digital sales of GMR heads, Head

Stack Assemblies (HSA) and Disk by gathering customer requirements, engaging in customer evaluations,

Providing complete customer clean room qualification support and following the product through delivery to

customer. Provided ESD / Contamination controls and product information and training to customer

engineering staff teams. Maintained strong partnership with development, test and Customer Engineering

teams.

Second Line Manager - Advisory Engineer/Scientist April 1989 to June 1995

Compliance Quality System Level Test, Integration, Workload Stress, Performance Manager

* Exercised control over Temperature / Humidity / Altitude operational, functional and performance phases of tests associated with Subsystems i.e. Shark, Coral in a System level environment (AIX, NT)

* Employed latest industry tools to assist problem isolation, debug and resolution.

* Quality compliance - Conferred with scientific, engineering and technical personnel (Internal and External to IBM) to resolve qualification issues i.e. compatibility issues.

SCSI Functional Microcode Verification, Device Interface/Logic

* Employed Xyratex Test Tools, FCL language, SCSI Bus and Microcode Analyzers as the Driver/owner of the Classical and Microcode test plans for Server HDD programs.

* Validated Functionality of logic and microcode during Hardware, Microcode Integration for IBM 3990 Model 3, 9 and DASD Arrays (RAMAC I/II subsystems

Test Tools/Automation

Accomplishments included identification, implementation, planning and relocation of test cell hardware and tools

to the Integrated Test Facility to support all aspects of tests associated w/ RAS (Reliability, Availability &

Serviceability)

Page 2 of 3

Willie P. Davis

CAPA-ENGINEERING MANAGER OR CAPA-TEST ENGINEER

Previously held IBM positions June 1976 to April 1989: Ink Jet printer product test manager; Failure

Analysis Engineer; Field Application Engineer and Quality Assurance Project Manager.

EDUCATION: GEORGE WASHINGTON UNIVERSITY WASHINGTON, DC

MASTER’S PROJECT MANAGEMENT JUNE 2000

Curriculum Vitae: Budget planning, Resource, Task planning, Team building, Scheduling.

University of California – West Coast Los Angeles, California

Bachelor of Science in Electrical Engineering/minor Mathematics June 1977

Curriculum Vitae: Computer Organization, DASD, Modern Digital and Analog, Control

Systems, Communication Systems, Analog & Digital Circuits, Switching Theory & Logic

Design, IC/Silicon Process Technology, Basic, Pascal, Assembler code, Basic C Prog.

TRAINING AND INTERNAL EDUCATION:

* Microsoft EXCEL, PowerPoint & Word * Windows Vista * SAP Data Management * CAPA non-conformances

* TL9000 Certified * IPC-A-610D Certified * Comprehensive Quality Assurance process certification – Manufacturing lines

* IDE interface certified * Designing Storage Area Networks * In-depth Exploration of SCSI / ATA, S-ATA (Introduction)

* PC Level Support Notebook, Desktop, Server * Project Management Certification – IBM classes

* ESD product and packaging Certification * C Programming * Intermediate AIX Basic * Advanced System Administration

* Web site Warranty Development * LAN Network Management * IBM Mainframe DASD and Storage Control Products

* VM – MVS Operation Token Ring Troubleshooting * PCI System Architecture * Hardware platforms i.e. OS/2, LINUX, etc.

PUBLICATIONS:

IBM 1.0”, 2.5” and 3.5” REWORK PROCESS QUALITY MANAGEMENT PLAN Partnership with vendor for document development for repair all 1.0”, 2.5” and 3.5” at several INTERNATIONAL Repair vendors covering from Device Electronic clean room repair and Mix and Match process.

IBM GLOBAL STORAGE TECHNOLOGIES WARRANTY WEB SITE JUNE 2003

Owner of technical document providing DASD details and specifications of IBM Global Storage Tech.

and IBM Storage Subsystem used by Worldwide Customers, Product Engineering, Sales and Marketing.

AWARDS:

* CTS \ Benchmark Electronics – Quality Achievment Award for SMT line Quality process improvement – 5DX

Software enhancement for medical PCBA inspecting. 10/2013

* CTS Electronics – Customer Satisfaction Award for Top product Quality deliveries. 06/2011

* Flextronics International - Achievment Award for SMT line Quality process improvement – 5DX

Software enhancement for medical PCBA inspecting. 06/2007

* IBM Suggestion Award for HDD End of Life Pricing – Reduce HDD EOL credits to reflex current

HDD market price. Average savings $ 30 Million per year i.e. 25K returns/week. (01/2003 thru 05/2006)

* Outstanding Contribution Achievement Award for IBM 1.0”/ 2.5”/3.5” Rework process Quality

Management Plan. (04/2001)

Page 3 of 3

Contact this candidate