DAVID BILLOT

**** *. ****** ***. ***. A

West Covina, Ca. 91792

Cell: 909-***-**** E-mail: acqwx5@r.postjobfree.com /

acqwx5@r.postjobfree.com

POSITION PURPOSES:

To be responsible for a wide variety of quality inspections on aerospace

parts and assemblies, and assure compliance to a variety of dimensional

and contractual requirements of products with complex geometry and

configurations. Responsibilities included in-process audits, final

inspection reviews and customer presentations. My positions have also

validated the physical characteristics as well as the processing

requirements and data package requirements imposed by customers.

My ultimate purpose of being in a Quality Organization, is the success of

the company, I believe that I can play a vital role in this success. I

also believe that the foundation of a company’s success is team work. In

addition to my technical skills that were required, the positions

required certain behaviors to support the success of the team. My key

behaviors included Team Work, Trust, Respect for co-workers, Consensus

Building and Integrity. An inspection team succeeds because it embraces

these behaviors. As an inspection team member, I approach challenges

willingly and consider continuous improvement as a daily part of the job.

I believe that all Quality personnel can benefit from a “Can Do” attitude

and I have endeavored to provide an environment of blameless problem

solving and continuous improvement to support the high performance

desired as an Inspection team member.

WORK EXPERIENCE (20+ YEARS)

Ø- PROFICIENT WITH USE OF ALL INSPECTION EQUIPMENT,

Ø- INTERPRET BLUEPRINTS TO ANSI Y14.5M STANDARD

GEOMETRIC DEMENSIONING & TOLERANCING,

Ø- KNOWLEDGE OF MILITARY SPECIFICATION

MIL-I-45208A INSPECTION SYSTEM REQUIREMENTS. MIL-C-45662 CALIBRATION

SYSTEM REQUIREMENTS. MIL-STD-105E DIMENSIONING AND TOLERANCING.

Ø- PROFICIENT WITH BROWN AND SHARP MICROVAL C.M.M. BROWN AND SHARP

VALIDATOR C.M.M.,MITIUTOYO 501 C.M.M. ZEISS (CNC/CMM)WITH CALYPSO SOFTWARE.

Ø-FAMILIAR WITH SEE BREEZ R.O.I. WITH QUADARA CHECK 5000

SOFTWARE, CIMCORE ROMER ARM USING VERISURF SOFTWARE,3D DIMIS SOFTWARE,CALYPSO SOFTWARE.

Ø- FIRST ARTICLE INSPECTION, IN PROCESS AND FINAL INSPECTION OFCOMPLEX MACHINED PARTS.

Ø-ENVIRONMENTAL CLEAN ROOM EXPERIENCE

Ø -KNOWLEDGEABLE WITH SIXSIGMA, SPC, TQM, GMP, LEAN MFG. PRACTICES,KIASAN TRAINING.

Ø- CALIBRATION OF INSPECTION EQUIPMENT USING GAGE TRAX SOFTWARE.

Ø- EXPERIENCED WITH AS9101 DOCUMENTATION, AUDITING AND ABLE TO MAINTAIN LOGS AND DOCUMENTATIONS TO ISO9001:2000 AND AS 9102 WITH INSPECTION EXPERT, I.Q.S.,MICROSOFT WORD AND EXCEL.

Ø- USE OF OPTICAL COMPARITORS WITH OR WITHOUT QUADRA CHECK.

Ø ABLE TO USE THE APPROPRIATE INSTRUMENT FOR INSPECTION OF GEARS SUCH AS RED-LINERS.

Ø- SURFACE PLATE SET-UP INSPECTION(CASTINGS) WITH THE USE OF SINE PLATE OR COMPOUND SINE PLATE.

Ø- INSPECTION EXPERIENCE WITH SURFACE ANALYZERS (OPTICAL FLATS, ROUGHFNESS TESTERS)

Ø- THE HEAT TREATMENT OF METALS: A2, D2, 4340, CASE HARDENING,(etc.) ROCKWELL,BRINELL HARDNESS TESTING, NON-DESTRUCTIVE TESTING.

Ø- EXPERIENCED WITH A VARIETY PLATING SPECS.(TIODIZE,HARD-ANODIZE,CHEMFILM etc.)

Ø- DISTINGUISHED BETWEEN FIXED SAMPLING,100% INSPECTION, ATTRIBUTES AND VARIABLES SAMPLING,(etc.)

Ø- IDENTIFIED SAMPLING CHARACTERISTICS SUCH AS OPERATING CHARACTERISTICS (OC) CURVE, LOT SZE, ACCEPTANCE NUMBER, SWITCHING RULES, etc.

Ø- DETERMINED SAMPLE SIZE(e.g. AQL), SELECTION METHOD, AND ACCEPT/REJECT CRITERIA (e.g., ZERO-DEFECT SAMPLING) IN VARIOUS SITUATIONS.

Ø- HAVE BEEN RESPONSIBLE FOR ORGANIZING AND OR REORGANIZING THE QC/QA DEPT AND THE TRAINING OF PERSONNEL WITH THE USE OF INSPECTION EQUIPMENT AND SETUPS WHICH HAVE LEAD TO BETTER EFFICIENCY AND VERY LOW TO NO REJECTIONS.(99.7% - 100%)

WORK HISTORY:

5/2014 - 7/2015

TOMI ENGINEERING

414 ALTON AVE

SANTA ANA,CA.

Job Duties:

Ø- Inspected incoming, in-process and final parts utilizing inspection equipment (i.e. surface plate, height gage, indicators, comparator ).

Ø-Carry out first off inspections, ensuring that the part is machined to the correct standard before manufacturing

Continues.

Ø Maintain OPC and sample inspection’s to ensure that parts are complying to method specification.

Ø- Reviewed incoming and production quality control activities to ensure compliance with internal procedures, QSR, ISO9001/AS9100 requirements.

Ø Complete receipt inspection where required (validation of parts returning from sub contract locations)

Ø Understand Engineering drawings for the purpose of inspection

Ø Complete visual inspection of parts during the inspection process.

Ø Generate Nonconformance paperwork as applicable.

7/2013 - 3/2014

VACCO INDS.

10350 VACCO ST.

SOUTH El MONTE, CA 91733

(AMTEC STAFFING TEMP CONTRACT)

Job Duties:

Ø- Inspected incoming, in-process and final parts utilizing inspection equipment (i.e. surface plate, height gage, indicators, comparator ).

Ø-Carry out first off inspections, ensuring that the part is machined to the correct standard before manufacturing Continues.

Ø Maintain OPC and sample inspection’s to ensure that parts are complying to method specification.

Ø- Reviewed incoming and production quality control activities to ensure compliance with internal procedures, QSR, ISO9001/AS9100 requirements.

Ø Complete receipt inspection where required (validation of parts returning from sub contract locations)

Ø Understand Engineering drawings for the purpose of inspection

Ø Complete visual inspection of parts during the inspection process.

Ø Generate Nonconformance paperwork as applicable.

Ø Prepare AS9102 F.A.I.R. using inspection expert softwear.

Ø-Performed data entry into database.

1/2013 - 5/2013

METRI-TECH ENGINEERING

5411 OCEANUS DR.

HUNTINGTON BEACH,CA.

QC INSPECTOR (LAY-OFF)

Job Duties:

Ø- Inspected incoming, in-process and final parts utilizing inspection equipment (i.e. surface plate, height gage, indicators, comparator ).

Ø-Carry out first off inspections, ensuring that the part is machined to the correct standard before manufacturing

Continues.

Ø Maintain OPC and sample inspection’s to ensure that parts are complying to method specification.

Ø- Reviewed incoming and production quality control activities to ensure compliance with internal procedures, QSR, ISO9001/AS9100 requirements.

Ø Complete receipt inspection where required (validation of parts returning from sub contract locations)

Ø Understand Engineering drawings for the purpose of inspection

Ø Complete visual inspection of parts during the inspection process.

Ø Generate Nonconformance paperwork as applicable.

7/2012 - 12/2012

SUMMIT MACHINE INC.

2880 E PHILADELPHIA ST.

ONTARIO, CA. 91761

QC INSPECTOR

12/10 - 10/11

GSC / PCC STRUCTUALS

2738 COMMERCE WAY

OGDEN, UT. 84401

Q.C. LAY-OUT INSPECTOR (LAY-OFF)

Job Duties:

Ø- Inspected incoming, in-process and final parts utilizing inspection equipment (i.e. surface plate, height gage, indicators, comparator, CMM).

Ø-Carry out first off inspections, ensuring that the part is machined to the correct standard before manufacturing

Continues.

Ø Maintain OPC and sample inspection’s to ensure that parts are complying to method specification.

Ø- Reviewed incoming and production quality control activities to ensure compliance with internal procedures, QSR, ISO9001/AS9100 requirements.

Ø Complete CMM inspection work as an independent over check for parts

Complete Airflow inspection in line with production requirements.

Ø Complete receipt inspection where required (validation of parts returning from sub contract locations)

Ø Understand Engineering drawings for the purpose of inspection

Ø Complete visual inspection of parts during the inspection process.

Ø Generate Nonconformance paperwork as applicable.

Ø Adherence to all company policies and procedures, including SOX, Code of Conduct and Health and Safety.

2/09 - 12/09

SOUTHWESTERN COLLEGE

CHULA VISTA, CA.

THEATER ARTS

11/06 - 9/08

DARMARK CORP.

13225 GREG ST.

POWAY,CA.92064

Q.A./Q.C. INSPECTOR I (LAY-OFF)

Job Duties:

Ø- Read and interpret blue prints to ANSI-Y14.5.

Ø -Inspected incoming, in-process and final parts utilizing inspection equipment (i.e. surface plate, height gage, indicators, comparator, CMM).

Ø- Inspected parts to blueprint, and the interpretation of ANSI-Y-14.5 and other appropriate aerospace and industry standards.

Ø- Performed first article inspections for the manufacturing department processes. Recorded all dimensional information on the appropriate document (First Piece / In-Process Inspection Worksheet or Router).

Ø- Interpreted engineering drawings, diagrams, and/or formulas and confers with management staff when a discrepancy exists.

Ø- Performed complete final inspection, as required, including review of in-process certifications and documentation to customer drawings, customer purchase order requirements, and STR procedures.

Ø- Selected products for inspections at specified stages in production process, and inspected products for a variety of qualities, such as dimensions, performance, and mechanical characteristics. Recorded inspection and test data utilizing statistical quality control procedures.

Ø- Evaluated inspection and statistical test data, and report results to the Quality Manager.

Ø- Reviewed incoming and production quality control activities to ensure compliance with internal procedures, QSR, ISO9001/AS9100 requirements

.

9/06 - 11/06

REYNOLDS-MASON INDS.

7960 STOMESA COURT

SAN DIEGO, CA.

Q.A./Q.C. MGR. (AEROTEK TEMP)

Job Duties:

Ø -Reviewed incoming and production quality control activities to ensure compliance with internal procedures, QSR, ISO9001/AS9100 requirements.

Ø- Supported production and quality control activities to ensure timely inspections and efficient material movement.

Ø-Reviewed and approved production documentation for accuracy and completeness.

Ø-Reviewed and approved printed labeling records.

Ø-Evaluated problems and made initial recommendations for possible corrective actions to supervisor.

Ø-Ensured quality records, production documents, and calibration were accurate and compliant to internal procedures.

Ø-Performed data entry into database.

Ø-Performed other related duties and assignments as required.

Ø- Inspected incoming, in-process and final parts utilizing inspection equipment (i.e. surface plate, height gage, indicators, Romer Arm).

7/06 - 9/06

QUALITY CONTROLLED MFG.

12424 Lakeshore Dr

Lakeside CA 92040

Q.C. INSPECTOR (AEROTEK TEMP)

Job Duties:

Ø- Read and interpret blue prints to ANSI-Y14.5.

Ø- Inspected incoming, in-process and final parts utilizing inspection equipment (i.e. surface plate, height gage, indicators, and comparator).

Ø- Inspected parts to blueprint, and the interpretation of ANSI-Y-14.5 and other appropriate aerospace and industry standards.

Ø- Performed first article inspections for the manufacturing department processes. Recorded all dimensional information on the appropriate document (First Piece / In-Process Inspection Worksheet or Router).

Ø- Interpreted engineering drawings, diagrams, and/or formulas and conferd with management staff when a discrepancy exists.

Ø- Performed complete final inspection, as required, including review of in-process certifications and documentation to customer drawings, customer purchase order requirements, and STR procedures.

Ø- Selected product for inspection at specified stages in production process, and inspected product for a variety of qualities, such as dimensions, performance, and mechanical characteristics. Recorded inspection and test data utilizing statistical quality control procedures.

Ø- Evaluated inspection and statistical test data, reporting results to the Quality Manager.

3/06 - 7/06

METAL MASTERS INC.

4611 Overland Ave

San Diego CA 92123-1233

Q.C. MGR. (AEROTEK TEMP)

Job Duties:

Ø- Read and interpret blue prints to ANSI-Y14.5.

Ø -Inspected incoming, in-process and final parts utilizing inspection equipment (i.e. surface plate, height gage, indicators, and comparator).

Ø- Inspected parts to blueprint, and the interpretation of ANSI-Y-14.5 and other appropriate aerospace and industry standards.

Ø- Performed first article inspections for the manufacturing department processes. Recorded all dimensional information on the appropriate document (First Piece / In-Process Inspection Worksheet or Router).

Ø-Interpreted engineering drawings, diagrams, and/or formulas and confers with management staff when a discrepancy exists.

Ø- Performed complete final inspection, as required, including review of in-process certifications and documentation to customer drawings, customer purchase order requirements, and STR procedures.

Ø- Selected product for inspection at specified stages in production process, and inspected product for a variety of qualities, such as dimensions, performance, and mechanical characteristics. Recorded inspection and test data utilizing statistical quality control procedures.

Ø- Evaluated inspection and statistical test data.

4/00 - 3/06

G.T.R. ENTERPRISES

6235-C CORTE DEL ABETO

CARLSBAD, CA.

MACHINED PARTS INSPECTOR

OWNER-CONTRACTED/ACCURATE LINEAR SPECIALTIES

Job Duties:

Ø- Read and interpreted blue prints to ANSI-Y14.5.

Ø- Inspected incoming, in-process and final parts utilizing inspection equipment (i.e. surface plate, height gage, indicators, comparator, CMM).

Ø- Inspected parts to blueprint, and the interpretation of ANSI-Y-14.5 and other appropriate aerospace and industry standards.

Ø- Performed first article inspection for the manufacturing department processes. Recorded all dimensional information on the appropriate document (First Piece / In-Process Inspection Worksheet or Router).

Ø- Interpreted engineering drawings, diagrams, and/or formulas and confers with management staff when a discrepancy exists.

Ø- Performed complete final inspections, as required, including review of in-process certifications and documentation to customer drawings, customer purchase order requirements, and STR procedures.

Ø- Selected product for inspection at specified stages in production process, and inspect product for a variety of qualities, such as dimensions, performance, and mechanical characteristics. Recorded inspection and test data utilizing statistical quality control procedures.

Ø- Evaluated inspection and statistical test data, reporting results to the Quality Manager.

10/98-9/99

K. A. K. MACHINE INC.

6584 RUCH RD.

BETHLEHEM, PA

QUALITY CONTROL MANAGER (LAY-OFF/ RELOCATED)

Job Duties:

Ø- Reviewed incoming and production quality control activities to ensure compliance with internal procedures.

Ø- Supported production and quality control activities to ensure timely inspections and efficient material movement.

Ø- Reviewed and approved production documentation for accuracy and completeness.

Ø- Evaluated problems and made initial recommendations for possible corrective actions to C.E.O.

Ø- Ensured quality records, production documents, and calibration were accurate and compliant to internal procedures.

Ø- Performed other related duties and assignments as required.

Ø- Inspected incoming, in-process and final parts utilizing inspection equipment (i.e. surface plate, height gage, indicators).

2/95-10/98

BLESS PRECISION TOOL

80 PACIFIC DRIVE

QUAKERTOWN, PA

QUALITY CONTROL MANAGER (LAY-OFF)

Job Duties:

Ø- Read and interpret blue prints to ANSI-Y14.5.

Ø- Inspected incoming, in-process and final parts utilizing inspection equipment (i.e. surface plate, height gage, indicators, comparator, CMM).

Ø- Inspected parts to blueprint, and the interpretation of ANSI-Y-14.5 and other appropriate aerospace and industry standards.

Ø- Performed first article inspections for the manufacturing department processes. Record all dimensional information on the appropriate document (First Piece / In-Process Inspection Worksheet or Router).

Ø- Interpreted engineering drawings, diagrams, and/or formulas and confers with management staff when a discrepancy exists.

Ø- Performed complete final inspection, as required, including review of in-process certifications and documentation to customer drawings, customer purchase order requirements, and STR procedures.

Ø- Selected product for inspections at specified stages in production process, and inspect product for a variety of qualities, such as dimensions, performance, and mechanical characteristics. Recorded inspection and test data utilizing statistical quality control procedures.

Ø- Evaluated inspection and statistical test data.

2/76-3/77

U.S. NAVY

USS SAN JOSE (AFS-7)

SAN FRANCISCO, CA

(BOSENS MATE, HONORABLE DISCHARGE)

EDUCATION:

TEXAS INSTRUMENTS: CERTIFICATE FOR 6 MONTHS TRAINING

COURSE IN MACHINE PARTS INSPECTION

MCDONNELL DOUGLAS AIRCRAFT COMPANY: COMPLETE 6 MONTHS

TRAINING IN BLUEPRINTS, MATH, MACHINE OPERATION, MACHINING OF METALS.

CERTIFICATE OF ACHIEVEMENT, PRIVATE INDUSTRY COUNCIL OF LEHIGH VALLEY, INC.

FREEDOM HIGH SCHOOL, BETHLEHEM, PA GRADUATE.

LANGUAGES: ENGLISH / SPANISH

Contact this candidate