Resume

Customer Service Engineering

Location:

Poland

Posted:

July 17, 2015

Contact this candidate

Resume:

Curriculum Vitae Adam Tralewski

Os. Jana III Sobieskiego 12/185, 60 – 688 Poznan, Poland

+48-605-***-***

acqslb@r.postjobfree.com

Date of birth 11/07/1984 Nationality PL

WORK EXPERIENCE

10.2014 – 09.2015 Academic Lecturer

The State School of Higher Professional Education in Konin, Faculty of Construction, Mechanics and Environmental Engineering, Kard. S. Wyszyńskiego 3c 62-510 Konin, tel. 63 249 72 45, acqslb@r.postjobfree.com Teaching activity:

technical thermodynamics,

heat transfer,

diploma seminary,

promoter of BSc thesis .

Business or sector : Higher education

10.2011 – 09.2015 Academic Lecturer Lectures within doctoral studies Poznan University of Technology, Pl. Marii Sklodowskiej-Curie 5, 60-965 Poznan, Poland tel. +48-61-665-****, e-mail: acqslb@r.postjobfree.com, www.put.poznan.pl Faculty of Working Machines and Transportation

Teaching activity:

pumps,

thermal power generation,

fluid mechanics,

fluids transport.

Business or sector : Higher education

04. 2015 Main Contractor Biogas piping analysis in the Central Wastewater Treatment Plant for the city of Poznan

Turbomachinery Research & Service, Potasze ul. Oczarowa 11, 62-005 Owińska, Polska tel. +48-603-***-***, e-mail: acqslb@r.postjobfree.com, www.turbomach.pl

preparation of the measuring system,

running of measurements,

evaluation and analysis of measurement results,

contact with suppliers of parts of the pipeline from Poland and abroad,

preparation of reports and presentations.

Business or sector: Wastewater treatment

Curriculum Vitae Adam Tralewski

© European Union, 2002-2013 http://europass.cedefop.europa.eu Page 2 / 7 12. 2014 Main Contractor Specification of the blowers for biogas transport system in the Left Bank Wastewater Treatment Plant - Poznań

EKOCENTRUM Sp. z o.o., ul. Budziszyńska 35/1, 54-434 Wrocław, Polska tel. +48-071-***-**-**, e-mail: acqslb@r.postjobfree.com, www.ekocentrum.pl

an overview of the existing situation,

specification of the blowers for biogas transport,

valuation of the system

flow characteristics of the proposed equipment, guidelines for the control and instrumentation system.

assessment of the possibility of installing a new system in the existing zoning,

contact with domestic and foreign suppliers of the system components. Business or sector: Wastewater treatment

10. 2014 Main Contractor Measurements of the thermodynamic and flow parameters and analysis of operation of biogas piping in the Left Bank Wastewater Treatment Plant - Poznań

Poznan University of Technology, Pl. Marii Sklodowskiej-Curie 5, 60-965 Poznan, Poland tel. +48-61-665-****, e-mail: acqslb@r.postjobfree.com, www.put.poznan.pl

preparation of the measurement system on site,

flow and thermodynamic calculation,

preparing reports of calculations and measurements. Business or sector: Wastewater treatment

09. 2014 Main Contractor Measurements of parameters of centrifugal blowers in NOGAT wastewater treatment plant

Poznan University of Technology, Pl. Marii Sklodowskiej-Curie 5, 60-965 Poznan, Poland tel. +48-61-665-****, e-mail: acqslb@r.postjobfree.com, www.put.poznan.pl

piping analysis,

flow and thermodynamic calculation,

preparing reports of calculations and measurements. Business or sector: Wastewater treatment/Machines design 05. 2014 Main Contractor Preparation of the documentation of the genset foundation GEN – SET Serwis, ul. Rumiankowa 18, Poznan, Poland

modeling of the genset frame,

modeling of the vibro insulators distribution,

assembly and detail drawings.

Business or sector: Power generation

Curriculum Vitae Adam Tralewski

NAVIC Engineering Polska sp. z o.o., ul. Sw. Michala 100, 61-005 Poznan, Poland tel: +48-61-652-**-**, e-mail: acqslb@r.postjobfree.com, www.polska.navicgroup.com

piping stress analysis, selection of pipe supports type,

flow loss calculation,

making P&ID drawings and isometric drawings for piping,

preparing reports of calculations.

Business or sector: Power generation/Metallurgical industry 10. 2012 Main contractor: Measurements of parameters of screw compressor cooling fan Airpol Compressors Manufacturing Company ltd., ul. Krancowa 24, 61-037 Poznan, Poland tel: +48-61-650-**-**, e-mail: acqslb@r.postjobfree.com, www.airpol.com.pl

preparation of the test station,

running of measurements,

evaluation and analysis of measurement results.

Business or sector: Compressors manufacturing

05. 2012 Main contractor: Design calculations of the test stand for the measurements of the efficiency of screw compressors

Airpol Compressors Manufacturing Company ltd., ul. Krancowa 24, 61-037 Poznan, Poland tel: +48-61-650-**-**, e-mail: acqslb@r.postjobfree.com, www.airpol.com.pl

design calculations of the test stand for the measurements of the efficiency of screw compressors. Business or sector: Compressors manufacturing

10. 2011 Main contractor: The measurement of volumetric flow of an air in the Copper Smelter

"Legnica"

NAVIC Engineering Polska sp. z o.o., ul. Sw. Michala 100, 61-005 Poznan, Poland tel: +48-61-652-**-**, e-mail: acqslb@r.postjobfree.com, www.polska.navicgroup.com

preparation of the measuring system in copper smelter,

running of measurements,

evaluation and analysis of measurement results,

preparation of reports.

Business or sector: Metallurgical industry

Curriculum Vitae Adam Tralewski

© European Union, 2002-2013 http://europass.cedefop.europa.eu Page 4 / 7 09. 2009 - 12.2011 Main contractor: R&D project - "Developing a range of optimal design of multistage blowers" No. PR 56-405/09 WALCZAK

Poznan University of Technology, Pl. Marii Sklodowskiej-Curie 5, 60-965 Poznan, Poland tel. +48-61-665-****, e-mail: acqslb@r.postjobfree.com, www.put.poznan.pl

one-dimensional design of blowers stage,

the design and construction of the test stand,

measurements of parameters of machines,

evaluation and analysis of measurement results,

preparation of reports.

Business or sector: R&D/Machines design

09. 2009 - 09. 2011 Main contractor: R&D project - "Development of optimal design of series of types of high power centrifugal compressors and blowers"

No. UDA-POIG.01.03.01-30-148/09-00

Poznan University of Technology, Pl. Marii Sklodowskiej-Curie 5, 60-965 Poznan, Poland tel. +48-61-665-****, e-mail: acqslb@r.postjobfree.com, www.put.poznan.pl

design and construction of elements of the test stand,

measurements of machines parameters,

velocity measurements using a laser anemometer (LDA),

evaluation and analysis of measurement results.

Business or sector: R&D/Machines design

07. 2010 - 08. 2010 Apprenticeship: Assessment of the impact of thermal insulation on the efficiency of the blower

Poznan University of Technology/Faculty of Machines and Transportation/ Chair of Thermal Engineering/Laboratory of Turbomachinery

preparation of the test stand,

measurements of parameters of the radial blower,

evaluation and analysis of test results,

assessment of the impact isolation on the value of the efficiency of the machine. Business or sector: R&D/Machines design

01. 2009 - 06. 2009 Semestral project: Work assessment of reciprocating compressor based on the indicator diagram

Poznan University of Technology/Faculty of Machines and Transportation/ Chair of Thermal Engineering/Laboratory of Turbomachinery

preparation of the test stand,

measurements of parameters of the radial blower,

evaluation and analysis of test results,

assessment of the impact isolation on the value of the efficiency of the machine. Business or sector: R&D/Machines design

Curriculum Vitae Adam Tralewski

PERSONAL SKILLS

2011 – 2015 Ph.D. in Technical Sciences in the field of Mechanical Engineering Thesis entitled: "Analysis of the flow in the return channel of centrifugal multistage blower based on numerical calculations and experimental tests" Supervisor: professor J. Walczak

Poznan University of Technology, Faculty of Machines and Transportation, Poznan, Poland

CFD calculations,

LDA measurements,

test stand preparation,

experience at giving presentations of work results,

arranging and conducting of thermodynamic measurements,

solving theoretical and practical problems in machines design. 2010 – 2011 Master of Science in Mechanical Engineering/Thermal Engineering Thesis entitled: "Analysis of the flow structure in centrifugal blowers stage using LDA" Grade: Very good (A)

Poznan University of Technology, Poland

arranging and conducting of LDA measurements.

2006 – 2010 Bachelor of Science in Mechanical Engineering/Thermal Engineering Thesis entitled: "Design of centrifugal blowers stage" Poznan University of Technology, Poland

designing of centrifugal blowers stage,

1D thermodynamic and flow calculations.

2003 – 2006 Faculty of Technical Physics

Poznan University of Technology, Poland

Mother tongue(s) Polish

Other language(s) UNDERSTANDING SPEAKING WRITING

Listening Reading Spoken interaction Spoken production English C1 C1 B2 B2 B2

German A1 A1 A1 A1 A1

Russian A1 A1 A1 A1 A1

Levels: A1/2: Basic user - B1/2: Independent user - C1/2 Proficient user Common European Framework of Reference for Languages Curriculum Vitae Adam Tralewski

customer service: experience gained working as a cinema staff and Squash Club staff (job during first years of studies),

experience at giving presentations of work results gained during masters studies and doctoral seminaries.

Organisational / managerial skills good organizational skills gained in R&D projects and during making measurements for industry Job-related skills proactive and creative researcher,

experienced in working independently,

04.2010 – 03.2015 entitlement for the operation and maintenance for gas networks, boilers, heating networks and installations, industrial devices receiving steam, ventilation and air conditioning devices, pumps, ejectors, fans and blowers with a power above 50 kW compressor with a power above 20 kW, the compressed air and technical gases installations, equipment, installations and networks with a voltage of 1 kV - course organized by Polish Society of Mechanical Engineers and Technicians,

proficiency in operation of Laser Doppler Anemometer,

flow and heat transfer calculations and measurements,

turbomachinery design, research, exploitation and service,

piping design according to EU standards,

piping stress analysis,

teaching experience with students and some PhD informal supervision. Computer skills Software knowledge gained in college and professional career:

Microsoft Office™ tools,

AutoCAD,

Autodesk Inventor,

Bentley AutoPIPE,

Ansys TurboGrid,

Ansys CFX,

MS VISIO.

Other skills enjoy sports particularly football (soccer) and running (2 half marathons), reading books, traveling. Driving licence B

Curriculum Vitae Adam Tralewski

Publications Pałucki Z., Tralewski A. - "Analysis of the flow in the vaned return channel on the basis of computational fluid dynamics (CFD) calculations",

Turbomachinery No.140, International Symposium Symkom 2011, Łódź 2011,

Walczak J., Grzelczak M., Pałucki Z., Tralewski A. - "Multistage radial blowers", Turbomachinery No.140, International symposium Symkom 2011, Łódź 2011,

Grzelczak M., Grudziński M., Pałucki Z., Tralewski A., Bździel J., Dembski G., Zozuliński S. -

"The concepts of construction and series of types of radial compressors", II Congress of Polish Mechanics, 29 - 31 August, 2011, Poznan,

Grzelczak M., Pałucki Z., Tralewski A. - "Analysis of flow structure and performance of the centrifugal compressor impellers applicable in flue gas desulphurisation systems", Archive of Energetics, 2013.

ANNEXES

Conferences

Participation in conferences:

ASME TURBO EXPO, June 14-18, 2010, Glasgow, Scotland,

SYMKOM 2011: 10th International Symposium on Compressor & Turbine Flow Systems - Theory & Applications Areas : Łódź, 26 - 28 October, 2011,

II Congress of Polish Mechanics, 29 - 31 August, 2011, Poznan,

copy of diplomas on request

Contact this candidate