Jimmy Hathcock

***** ****** **** *****

Chester, VA 23831

H# 804-***-****

C# 804-***-****

acqs7j@r.postjobfree.com

ENGINEERING EMPLOYMENT

**/**-**/** ******* Electric/Hitachi - Wilmington, N.C. (Contract Assignment)

3D/Design Engineer/Modeler (Concrete, Steel and Plant Layout)

03/12-05/13 Savannah River Remediation - Aiken SC (Contract Assignment)

Sr. Structural Designer. (SRR Pipe Supports and Tank Farms)

11/10-03/11 Progressive Design Inc. - Richmond VA (Contract Assignment)

Sr. Structural Designer.

10/07-12/08 Jacobs Engineering - Charleston SC (Contract Assignment, Office Assignment)

Sr. Civil / Structural Designer / Checker.

05/96-10/07 Day & Zimmermann Int’l - Richmond VA, Greenville SC, Ft. Campbell KY (Direct Assignment) Senior Structural Designer/Field Engineer-Office and Field Assignments.

8/71 - 05/96 Austin Brockenbrough & Associates; Virginia Power; Fluor/Daniel

Construction; Rockwell Hanford Operations; Busby, Inc.; Duke Power; Westinghouse Corporation (HEDL-Laboratories/FFTF); Proctor and Gamble Paper Products; Western Electric; Borg-Warner Chemicals; Inta-Roto Mach. Design Inc.; E.I. DuPont; Wilbur Smith & Associates; Philip Morris - USA; Reynolds Metals Co.; Adtechs Asea Brown Boveri. W.P.P.S.S.; J.A. Jones Construction; Detroit Edison; Exxon Nuclear; Day & Zimmermann Inc.

NON- NUCLEAR EXPERIENCE

PROGRESSIVE DESIGN INC. - Richmond VA (Contract Assignment)

Structural Designer with Field trips for information, AutoCadd 2008 and Microstation V8. Chemical Plants, Paper Plants, Power Plants and Industrial facilities. New and rework for additional capacity and enhanced production capabilities. (11/10-03/12)

JACOBS ENGINEERING - CHARLESTON SC (Contract Assignment)

Office Designer/Checker With Auto-Cadd 2004 (2D), Intergraph Smart Plant (3D), Petro Chem, oil refinery expansion “Tar Sands Project”. Structural design and checking of steel modules for a plant in Canada. Complete plant of “Modular Design”, divided into rectangular modules connected laterally as well as vertically, designed and assembled completely including piping, instrumentation, mechanical equipment and electrical. Then disassembled, transported and re-assembled at a distant site in another country. Checked for Fit-Form and Function as well as Interference Avoidance. Design structure included tanks, walkways, ladders, grating, concrete foundations with steel piles in perma-frost conditions. Pipe supports from floor, overhead, and pipe racks. Connector walkways, metal and concrete steps and multi story stairways. Extensive fireproofing involved. (10/07-12/08)

DAY & ZIMMERMANN INT’L - GREENVILLE, SC (Contract Assignment)

Office Designer Petro-Chem, With Bently Microstation V8 (2D): Concrete and Steel Design including ladders, platforms, grating, foundations, pump pads, building additions, pipe supports, pipe racks (both inside and outside) suspended as well as free standing, tanks, and vessels as well as misc. equipment placement and mounting. (05/07-10/07)

ARMY CORP. OF ENGINEERS - FORT CAMPBELL KY.

Field Engineer, worked in the field for the replacement of the chilled water supply and return piping and the hot water supply and return piping from the Central Energy Plant to two different block area. This involved problem resolution for the constructor as well as making the packages for the Mechanical Turnover of the individual buildings. (8/01-05/07)

PHILLIP MORRIS INC. - RICMMOND VA.

Civil Site Engineer, responsible for all new site earthwork, concrete foundations and floors. All structural aspects of a new 150,000 sq. ft. warehouse facility, including steel erection, roofing systems, and HVAC installation. (11/00-8/01)

DAY AND ZIMMERMANN INT’L - HOPEWELL VA.

Existing chemical plant, concrete pads, floors and wall construction, foundations, pump pads, pipe supports, pipe racks, storage tanks for plant expansions and general “ Keep the plant running” Type of work.(Acadd-12/14)

ABB – RICHMOND, VA. - (Contract Assignment)

Provided design for rebuild of generators (rotor/stator) which required field support during removal and reinstallation of units.

PHILIP MORRIS - RICHMOND, VA. - (Contract Assignment)

Designed and provided installation support and as-builts for Filtech Systems at Manufacturing Center/Cabarrus/Louisville. Worked with John Owen, Dave Sharp, Winston Sanders.

AUSTIN BROCKENBROUGH AND ASSOC. INC. - RICHMOND, VA

Inspector for the Varina-Enon I-295 Bridge. Was responsible for the underwater excavation and placement of the armor stone for the two river tower piers. Duties included daily reports and a final report for the project. Attended milestone meetings and various schedule meetings.

PROCTOR AND GAMBLE, INC. - MEHOOPANY, PA (Contract Assignment)

Project Coordinator - Five installations of Measurex Scanners on paper lines, conveyors for a “no touch conveyor” system from machine to warehouse. Installed a 100,000 gal. S.S.S.L. Storage Tank, and numerous other projects in the plant. Maintained time line charts and schedules for the various construction jobs and activities on each job.

WILBUR SMITH AND ASSOC. - RICHMOND, VA

Field Designer - Worked in office for six months and in the field for six months. In the field, I surveyed and assisted the field personal with design and accumulating information for the office personal. I was an Inspector for the construction of bridges, shopping centers, housing developments, highways, intersections and parking.

NUCLEAR EXPERIENCE

GENERAL ELECTRIC/HITACHI – Wilmington, N.C. 3D/Design Engineer/Modeler -3D model of new ESBWR Reactor for Dominion Power- North Anna Unit #3. All 3D drawings as well as all 2D takeout drawings, Structural, Mechanical and Electrical Drawings as well as P&ID’s. 3D smart plant 2011, Autocad 2013, PLM database and control, PDMS control.

(08/13/-07/15)

SAVANNAH RIVER REMEDIATION - Aiken, SC- Pipe Support Design, Plant Layout, General Structural support for facility. This includes ladders, stairways, platforms, foundations, re-bar sizing and placement, revisions and new drawings. MicroStation V7.1 (J), SmartPlant 3D, and some FrameWorks 3D. (01/12-05/13)

PUREX RADWASTE FACILITY - Richland, WA - Pipe Support Design, Dept. Manager. Manager for pipe supports design (Hanging rod type and frames) for new construction facility in a Nuclear Radwaste handling facility for Hanford, Washington. (12/92 - 09/93)

SHEARON HARRIS-1, 2, 3, 4 - Apex, NC - Construction Engineer, Pipe Support design and Installation, This plant was new construction. I was a System Engineer, and was responsible for system completion to support plant start-up activities. I was also a supervisor for the night shift with up to twenty-five Engineers and Designers working for me. One Field Engineer was assigned five to seven crews with six men per crew. Field resolution of interference problems and redesign if necessary. (07/84 - 02/86)

WOLF CREEK-1 - Burlington, KS - Construction Engineer, Pipe Support Design, Nuclear field construction on a new plant. I was Supervisor for the night shift and had up to six Engineers and Designers working for me. I was responsible for resolution of installation problems and redesign (rod and frame types) if needed. One Engineer was assigned five crews which had five men per crew. (06/82 - 07/84)

WPPSS-1, 4 - Richland, WA - Construction Engineer, Pipe Support Design. field support for craft for field interference resolution problems including redesign if needed. This job had one Field Engineer for eleven crews with five men per crew. I was the night shift Hanger Supervisor on this job and I had as many as six other Engineers and Designers working under my supervision. (06/81 - 12/81)

SURRY-1, 2 - Surry, VA - Outage, Steam Generator Replacement, Pipe Support Design, Construction Engineer, Design of various types of supports for nuclear piping systems, installation support for craft including suiting up (live plant environment), assistance included redesign if needed. This job was in a hostile environment, working to a very tight schedule. This job was the first Steam Generator Replacement in the U.S.A. it was completed on time and on budget. (01/80 - 05/80)

McGUIRE-1, 2 - Charlotte, NC - Construction Engineer, Pipe Support Design and Base plate analysis for approx. 40,000 supports. Identification and redesign if needed. Field craft support with rework and /or replacement of base plates. This job had one Field Engineer for eleven crew’s w/five men per crew. (08/79 - 01/80)

OCONEE-1,2,3 - Calmest, SC - N.R.C. Bulletin 79-14, 79-02 Base Plates, Construction Engineer, Nuclear Field assignment for mathematical analysis of rigid vs. flexible base plate.

(07/79 - 08/79)

FERMI-2 - Monroe, MI - Construction Engineer, Pipe Support Design Pipe support design(rod and frame type) and installation, working w/craft to resolve installation interference problems including redesign. This job had one Field Engineer for up to eleven crews w/five men per crew.

(02/79 - 05/79)

FFTF - Richland, WA - Construction Engineer, Pipe Support Design(rod and frame type), Mechanical Equipment Pipe support design and installation, working w/craft to resolve installation interference problems including redesign if necessary and Mechanical Design doing Jigs and Fixtures to ANSI 115B drafting stds. And Y14.5 (04/78 - 01/79)

SUMMARY OF INDUSTRY EXPERIENCE:

Civil Design - waste treatment facilities, aerators, lagoons, settling ponds, dikes, head walls, bridge abutments, parking lots and decks, curbs and gutter, drainage design including overland flow. Streets, roads, Interstate highway. Design, cut and fill to final grade. Knowledgeable in surveying practices, Extensive checking of constructability requirements.

Structural Design - piping systems support, up to 55" diameter piping to NRC codes, ASME Section III, Subsection N.F. ANSI B31.1, platforms (steel and concrete), catwalks, ladders, towers, handrails, rebar placement, parking lots & decks, building sections, pump foundations, pipe support piers, drainage support, and extensive welding and weldment designs. Hand calculations for structural adequacy and weld sizing and designations. Field Engineer, Construction Engineer and Project Coordinator, Site Civil Engineer, Checking 2-D & 3-D Drawings, Resolving clash report item resolutions, Modular steel frame construction, Petro-Chem Industry.

Facilities Design - plant layout for equipment location and required services including HVAC, piping, wire ways and cable trays, electrical and personnel considerations including light, heat, A/C and safety guards. Designed chemical & nuclear, reactor supports with associated tie-ins. OSHA/ANSI/ASME codes as well as state, fed., and local.

Machine Design - conveyor system design, including belt, table top and overhead cable types, bulk powder conveying systems, case packaging, palletizers; hands-on auto blade stops, product merge sections, etc. Design of cargo containers, shipping containers, truck bodies, trailers, waste storage tanks. Design of inspection device installation (Measurex) for paper handling, (Filtec) for product filling confirmation. Remote handling devices for nuclear fuel enrichment processes and inspection devices. Updating spinning machines and associated equipment required for synthetic string line. ANSI B31.1 and Y14.5 Geometric Tolerancing and Y115B Drafting stds. Extensive checking of construction drawings and procedures, as well as conceptual design and drafting with Acad. & Micro-Station.

Field Engineer-foundation installation, concrete floors, building erection, enclosure and associated interior facilities for a complete manufacturing facility, plant layout, inspection and supervisory capacity for various construction projects. Extensive Nuclear Field Engineering for construction. Replacement of heating and cooling piping for the Army Corp. of Engineers at Ft. Campbell KY. Construction Site Civil Engineer for warehouse facility, Phillip Morris U.S.A.

EDUCATION

J. Sergeant Reynolds Community College - A.A.S. Civil Engineering

VCU - Two year Engineering Transfer Program

Daniel Construction - Certified Welding Seminar, Field Leadership Seminar for Managers

Westinghouse - ANSI Y14.5 Geometric Tolerancing Seminar

Virginia Power – AutoCAD Rel. 10

J.T.C.C. - AutoCAD (10) summer 1991

Philip Morris - INTERGRAPH 3.3 and 4.0.2 MICRO-STATION

Reynolds Metals Co. - AutoCAD Rel. 10, 11

ABB-AUTOCAD Rel. 12, Pro-Engineer

Day & Zimmermann Inc. - AutoCAD Rel. 12, & 14, Pro-Engineer

B E & K – AutoCAD 2002

D & Z - MicroStation V8, Frameworks

Jacobs Engineering- AutoCAD Rel.2004, SmartPlant 3D, Pro-Engineer.

Progressive Design Inc.-AutoCad 2008, Microstation V8

G.E.-AutoCad 2013, 3DSmartPlant 2011, PLM, PDMS, DOORS.

Contact this candidate