Vicki J. Lopez

*** ** ****** **** ***

Apt. C

Hillsboro, OR 97124

503-***-****

Cell 503-***-****

OBJECTIVE: I have done Ciba for boards, SMT Soldering and thru - hole Soldering for 5 years. Various computers programs also different web sites for the computer. Calibrated printers for 3 years. Test Wafers for 2 years. Worked under microscopes, inspecting repaired boards. Have worked in Class 100, 10,000 clean rooms 8 years off and on. Worked with die also after cut with a computer machine those on a die attach machine. I fill I would be a good employee for any company.

EDUCATION

1985-1986 Electronics I & II, Algebra I Tektronix Inc.

1995 blue print class. Merix Inc.

2005 blue print class Texas Instrument

Graduated Collage – Remington Collage – May 2010 – Medical Assistant

EMPLOYMENT:

Solarworld/Randstad

Work on CVD tools, keep all wafers going through the tool, making sure wafers are good in the boats

when there going in tubes, also when they come out making sure good quality of wafers

are there before going in carrier

April/2013 – April 2015

Kelly Services/Tonka Electronics

Soldering leads from the ribbions to the circuit boards under microscope, .prep material,

Measuring cutting ribbions, test clean, final assembly doing housing, labels. Ship out.

Jen Bull Kelly Staffing Manager 503-***-**** May 2012 – April 2013

Express Employment Professionals;

TEMP JOB AT Beaverton Foods

Nov 2011 - May 2012

Kristi Sweeney Phone -503-***-****

Senior Staffing Consultant

Aerotek/Keisha Johnson 469-***-****

Contract jobs start up line and proto call product in Nov 2010 & Feb 2011

TriQuint Texas

Oct 2008 – July 2009 Suprv. Martin Dowen 214-***-**** ex 5695

Area - Cleanup D2

Certified on Convac, Semi tools, Scrubber SS008A, Almost Certified on Tape Lift off, Asher.

Also learning Xelene on HD040A, also running SVC 12 . Will be inspecting more. Doing Quals.

TriQuint Oregon

Temp to hire 2/7/08 - Aug. 2008 Suprv. acqejo@r.postjobfree.com Hillsboro OR

Hired 6/30/08

Fab operator II

I been working in Clean tunnel. Certified in EMS Training, Fab Documentation, Matrix, Matrix Qual,

Plasmo, Solvent Photoresist strip 1 & 2, SPC, SPC Q1 Analyst Training, Surfsane/6200 Tencor, Wet

Station Bettcher,Yieldup.

The reason I am having to move is my in law’s have both taken ill at the same time. To which they no

longer can take care of there self’s any more. My mother in law memory is going fast and also she has a

broken back. Father in law health has gotten really bad to where they say he has around 6 months to live .

To where is can’t really walk any more and needs almost 24 hour care now.

Employers Overload/Squires Electronics

11/29/07 - Still working there

Assembler Solder -Nicole St. Claire 503-***-****

All day soldering part to wires for medical equipment

Sometimes 2 wires or there is also 4 wires. .

April 30th 2007 - Nov 14th 2007 Volt/SEH

Volt Cassie Farris 503-***-****

Sr. Operator Alkaline Etch

We used MES to find material coming into etch. Pulled from there. Verified each ingot then scan in each

cassette to log in to area. Making sure we log it in on other computer so machine knows which one will

be in each order to go through machine. We then also measured each first cassette, the first wafer and

the last cassette and the last wafer on each ingot. After all staged for machine we then start up machine up

After chemical changed is ready and the monitor wafer has gone through and measured. We then run

cassettes in the port of the front of machine. Which then we filled out paper work and log sheet, then take

it to back side of machine where it waits for them to come out. Also did wash baths on machine when it

finished. Where you then clean all around the 3 baths. Also inspect wafers when they came off of

machine to see if there was any rejects, which we would put them in a bag to seal them in and put

information from each cassette from which lapper machine, if it was front side or back side, then log it

through, put what kind of rejects also.

Oct 2006- April 2007 PMO Operator Nike Inc. Manager Jerry Walker HRSC Customer Service Phone 503-***-**** Make sure machine is all set up right at begin of shift troubleshoot

When needed. Your in charge of the partner you have to make sure machine running

good. watch end of machine make sure you don’t run out of film. Do test check on parts every 2 hours. Make sure you get cycle count each 1 hour what is set for each product. So the company is making money. make sure cutting out parts is cutting out good and no scrap as possible like miss cuts.

Feb 2006 -Oct 2006 Shipping Clerk Sauer Danfoss Manager Raul Ramirez 503-***-****

Had to data log in all orders going all over and out of USA. Make labels for the orders and put them on the boxes. Make sure all information was right on the orders. Did extra papers for Fed ex. UPS. Made sure the boxes were made up right to be shipped out.

Oct 2003 - Oct 2005 Manufacturing specialist (Texas Instruments) Volt Services Supr. Charity Stonestreet 972-***-**** e-mail cstonestreet -volt @ti.com Probe Testing wafers, Setting up Hi - tech equipment. Various computer programs used in testing of semiconductors. Resolves issues with equipment failures & low yield process. Uses heavy troubleshooting ability to detect and correct misprocess & set - up issues using different web sites from computer to find information for each lot every day.

Moved to Texas 2002 after divorce Started work later Oct 2003.

Feb, 1998- Sept, 2000 Production worker, Temp Services Employment Trends-- manager at MaxTex Judy Watland

Set-up Pick & Place epoxy machine. Repaired dies. Put dies on mount machine. Had to read blue prints and drawings everyday. Made sure there was no new changes to that order.

At another company short time ran the Rayonic machine which your stuffing boards with the computer which makes it faster to get orders to get done. Also SMT Soldering boards and repairs them if needed.

Took time off after 2nd child was born From Sept 1997 - Feb 2000

Sept. 1994 - Sept 1997 Utilities Person / Assemblers II Technician Merix Inc.

Supply people with what was needed, worked with computer to log out orders being shipped out . Worked in Ciba clean room for photo print machines. Ran developer machine, made ink for screen printers at times. Helped out in other areas when slow in are.

Manager Jim Sims/Rick Jenkins- 503-***-****

Jan, 1991- Sept 1994 Final Assembler III Manager Bob Meadows 503-***-**** Tektronix Inc.

Phaser III Printer Line Set-up area, Built metal frames/metal drums . Worked in Pre - ship, Calibrated Printers, Calibrated Laminators that needed repair for the printers. Used computer to calibrated the printers. Worked assembly’s

Tektronix Inc. worked 1978 - 1994 Merix Inc. (was part of Tektronix Inc.) 1994 -1997

Contact this candidate