Lisa C.Webb
Westminster,S.C. **693
acqdt1@r.postjobfree.com
Objective: An interesting permanent postion with a growing company to use my skills and knowledge and learn new skills as well as gain knowledge and grow as an employee.
Experience:
Parkway Products Shannon Smith
1642 Blue Ridge Blvd. Quality Manager
Seneca,S.C. 29693 864-***-****
ext - 453
Position: Manufacturing Inspector
Oct. 2014 thru May 2015
Responsibilities:
- Process set up verification
-In Process dimensional and visual inspections
- documentation of In Process checks in " JDP"
-Color verification by customer supplied sample
-Retrieved material from commercial molding machine dryers for the purpose of running a "moisture analysis" as required by customers
- Generated specific labels for each work order,by using nice pro label system by entering reqired information. Example being customer part number,parkway part number,week number,qty in box,tote or skid,etc.
- Prepared "TMM" documents required by Parkway for each work order. This process is used for "the end of production" report.
- Prepared Process Logs for each work order,this is part of the set up verification process.
- Updated the Process Logs as required by manufacturing inspector instructions also if a significant change was made to process during the initial run.
- Recorded machine data on process log once per shift
- Generated "On Hold" tickets for any and all non conforming product upon finding the non conformance
- End Of Shift Production report
Tools used to perform job duties:
- CMM measuring machine
- Micro - Vu visual measuring system
- Digital / Dial Calipers
- Digital Micrometers
- Digital Indicators
- Digital scales for weight
- Microscope
- Gage Pins and Gage Blocks
- Mating parts supplied by customer to ensure product is correct
- other measuring devices and tools as required by specific products and customer expectations
Mastercorp Housekeeping Inc Shyanne Riley
U.S. Hwy. 64-828-***-****
Sapphire, North Carolina
Position: Guest Room Attendant
March 2014 thru Oct. 2014
Resposibilities:
- served as Primary cleaner for the resort
- Complete any and all request that the guest wishes
- Departure cleans upon guest check out
-Performed Deep Cleans of units at the resort upon completion of any and all maintenance issues
- Full cleans of resort units
-Room move cleans as needed
- Clean and tidies for guest who stay over intial booking days
- Replaced inventory in each unit as needed
- Restocked with Clean Linens, Bath Towels,Hand Towels,Wash cloths,Kitchen Linens. Restocked items in an extreme neat and organized fashion
- Restocked any and all amenities that the resort furnished and was required to be in unit
- Performed Pre Arrival inspections on villas cleaned and restocked by an associate guest room attendant to ensure quality,cleanliness and a complete inventory of all bed linens,bath towels,etc and guest amenities supplied by the resort as well as kitchen dishes, utencils,pots and pans etc.
- Completed a Pre Arrival Inspection form which is used as a "score card" for the guest room attendant responsible for cleaning that resort unit these get turned in to the housekeeping coordinator
- Performed the above listed job duties in an extreme precise timely and efficient manner per company expectations and policies
Eagle Media Christopher Johnson
west north first street 864-***-****
Seneca, S.C. 29678
January 2000 thru March 2014
Position: Independant Contractor ; delivery specialist
Responsibilities:
- Delivered numerous printed copies of newspapers, Upstate Living Magazines, Golden Corner Shoppers Guides and any and all other publishings printed by The Edwards Group that required delivery to local businesses as well as home deliveries
- Performed this service with very minimal supervision, in a timely fashion while focusing on complete 100 percent customer satisfaction.
- My goal being no less than "ZERO" customer complaints
U S Engine Valve Bryan Sheehan or
7039 South Hwy. 11 Mary Ann Craft
Westminster, S.C. 29693 864-***-****
Position: Product Technician
April 2012 thru Sept. 2012
Responsibilities:
- Grind seat on intake and exhaust valves
- Gage each valve to ensure parts are being produced to to comply with the customer supplied specifications indicated on each blueprint dimensionally as well as visually
- Pack valves in customer supplied packaging, label the product and proceed to shipping
-Dress grinding wheels as needed
-Clean the diamond that dresses the wheel as needed
-Change wheel on seat grinder when the machine automatically backs it out and or wheel starts "loading up" repeatedly in short incriments of time
Tools used to complete my job duties:
- Digital Calipers
- Digital Micrometers
- Microscope
- Tip Hardener
-Seat Grinder
- Used undersized and oversized "pokey yokes" to determine if parts were coming off line as conforming product in the final machine process on the finish end process
American Services @ Whitney Franks
Southeastern Machining Dan Cash
Pelzer, S.C 864-***-**** or
Position: CNC milling
Machine Operator October 2011 thru April2012
Responsibilities:
- Operated a Fadal milling machine
-Operated an OKK milling machine
- Measured and Inspected parts to ensure they are in spec according to the blueprint
Tools used to perform job requirements:
- Digital Calipers
- Digital Micrometers
- Optical Comparator
Blue Ridge Tool & Machine Allen Marcengill
114 Hollow Oaks Lane Quality Manager
Easley, S.C. 29642 864-***-****
Position: Quality Assurance Tech January 2009 thru
February 2011
Responsibilities:
-Performed First Artical Piece inspection on all machine set ups to verify product and process
- Generated inspection documentation and records from customer supplied blueprints
- Assured compliance with established procedures were maintained
- Communicated all quality issues and concerns with the quality manager
- Generated, maintained,updated and filed all inspection data per my work instructions
- Assured all product was properly identified and indicated the proper inspection status (accept, rejectt, on hold)
- Received all incoming product, raw material,office supplies etc.
- Assisted with internal audits as well as ISO audits
- Assisted in calibration of measuring tools as required by ISO
- Maintained all calibration records for measuring tools used whether company owned or employee owned, by dates, vendor calibrated or in house calibrated
- Documented all Non-Conformance issues on the proper NMR form follered up with a CAR (corrective action request)
Tools Used:
- Hand Tools - Calipers, Micrometers, Linear scales, etc.
- Gages - Gage Pins, Gage Blocks,Thread Gages, Custom Gages and Go - No Go Gages
- Optical Tools - Optical Comparator, Microscope and an Optical Gaging Visual Measuring Machine
- Weights, Balances and Scales
- Hardness Tester - Rockwell
- Surface Profilometer
- Force Measurement Tools - Torque wrenches
- Angle measurement Tools - Protractors, Sine Bars, Angle Bars, etc.
Sandvik Dwight Martin
2424 Sandifer Blvd. 864-***-****
Westminster, S.C. 29693 February 12,1996 thru
July 13,2007
Position: Grinder Operator Responsibilities:
- Operated Multiaxis Numerical Control Grinding Machines,used to produce Carbide Cutting Tools
- Compared Numerical Data with specifications on the operations sheet
- Assembled and Preset Tooling for next operation during automated cycle in an effort to reduce machine down time
- Set up and Operated manual and robotic ER (edge roundness) machines to achieve proper hone size as specified on customer supplied blueprint
- 100 % visual inspect inserts as they came off machine as I was placing them in tray
- Plotted data on SPC charting system to ensure machine capabilities to produce acceptable product
Tools Used:
- Calipers, micrometers, optical comparator, microscope, etc.
Education: GED
Oconee Adult Education August 2008
Tri County Technical College Commercial Truck Driving
Certificate : October 2007 - January 2008
Obtained Class "A" CDL from Department of Motor Vehicle
Greenville Tech Business Training Excel 2007 Level 1
Certificate March 2010
Greenville Tech Business Training Excel 2007 Level 2
Certificate April 2010
Greenville Tech Business Training Excel 2007 Level 3
References:
Professional and Personal References available upon request