Mechanical Engineer
Resume:
Lord Nicho B. Carcido
Al Khor, Qatar
+974-******** (Vodafone Qatar Number)
+639********* (Roaming Globe Number)
****************@**********.***
** ***** *** ******** **, 1988
Single Filipino
Eligibility
Passed Mechanical Engineering Board Exam September 2010
oLicense Registration Number 0075374
Educational Attainment
College: Bachelor of Science in Mechanical Engineering Graduate March 2010
Xavier University - Ateneo de Cagayan
Cagayan de Oro City, Misamis Oriental
Skills
Experienced in Handling People Relations
Computer Literate (MS Office: Word, Excel, PowerPoint)
Proficient in AutoCAD 2D and AutoCAD 3D
OSA4 Microlab Oil Analysis
Asset Management Operating System (AMOS-D)
Good Workshop and Machine Shop Practice
Good Maintenance and Project Planning/Scheduling Practice
Good oral and written communication skills
Hardworking and can work with minimal supervision
Work/Training Experience
PMV Junior Mechanical Engineer - Oil Analysis
Al Jaber Engineering L.L.C.
Construction (Plant Machineries and Vehicles, PMV)
Al Khor, Qatar
November 2014 – Present
Duties and Responsibilities
oOperated and Maintained the OSA4 Microlab On-Site Oil Analyzer.
oDeveloped the oil analysis sampling frequency schedules (oil analysis program) for Heavy Equipment, Heavy Vehicles, and Auxiliary Equipment.
oReceived and Analyzed Oil and Coolant Samples taken from Heavy Equipment, Heavy Vehicles, and Auxiliary Equipment, depending on the SOS (Scheduled Oil Sampling).
oCondition monitored all Heavy Equipment, Heavy Vehicles, and Auxiliary Equipment using Oil Analysis Trending Report. Monitoring the amount of Wear and Contaminant Metals, Additives, Contaminants, Physical Properties, and Particle Count if it is still acceptable.
oCondition monitored coolants if it is within normal working condition.
oNotified responsible Foreman/Supervisor/Engineer in-charge of the machine if found any abnormal or critical condition of the oil such as oil from the Engine, Transmission, Differential, and other Gearboxes that requires either Corrective or Preventive Action.
oDeveloped and monitored the oil replacement frequency for all Heavy Equipment, Heavy Vehicles, and Auxiliary Equipment which are not covered under oil analysis program.
oStandardized the lubrication requirement across the plants by suggesting equivalent lubricant availability.
oMaintained a consolidated lubrication oil chart detailing equipment Number, the type of lubricant, quantity of lubricant and the frequency of replacement. Modify the list to include new equipment / delete the out of use equipment.
Additional Responsibilities:
oDrafted the Al Khor PMV Workshop using AutoCad 2D/3D.
oVerified the Preventive Maintenance Schedule-Lubrication Oil Use and Change-Out.
PMV Junior Engineer
Al Jaber Engineering L.L.C.
Construction (Plant Machineries and Vehicles, PMV)
Al Khor, Qatar
May 2014 – October 2014
Duties and Responsibilities
oAssisted on the day-to-day activity of the PMV Service Manager.
oReceived Daily Reports from the PMV Service Group and updates regularly for manager review of the following:
Daily Tire Damage Report
Daily Hydraulic Rock Breaker Broken Chisel Report
Daily Trencher Teeth Consumption Report
oUpdated the Organization of the Service Department, Main and Site workshops
Mechanical Fitter (Maintenance Department)
Aboitiz Power Corporation-Therma Marine, Inc. Mobile 2
Barge-Mounted 100 MW Bunker-Fired Diesel Power Plant
Nasipit, Agusan del Norte, Philippines
August 2012-April 2014
Duties and Responsibilities:
oReceived the preventive maintenance schedule on a weekly, monthly, quarterly and yearly base, which is also reported to the mechanical foreman upon completion by the end of the day.
oInspected areas indicated in report submitted by the operations department and the mechanical foreman regarding the internal or external problems of the following equipment:
Two (2) units 12K90MC-S, 51240KW @102.9 RPM, low speed, MAN B & W Diesel Engine
Waste Heat Recovery System
Auxiliary Boilers
Steam Turbine
Pumps
Separators
Other Mechanical Equipment
oCollected identified problems as a result of inspection upon approval of the mechanical foreman.
oCarried out maintenance jobs, troubleshooting, repair and overhaul of the following:
Two (2) units 12K90MC-S, 51240KW @102.9 RPM, low speed, MAN B & W Diesel Engine
Waste Heat Recovery System
Auxiliary Boilers
Steam Turbine
Pumps
Separators
Other Mechanical Equipment
oCondition Monitored two (2) units 12K90MC-S, 51240KW @102.9 RPM, low speed, MAN B & W Diesel Engine by performing the following:
Quarterly measured Piston ring coating using the Ultrasonic Thickness Tester.
Annually measured Pressure Vessels such as Steam Boilers, Air Tanks, Fuel Tanks, and Sludge Tanks.
Quarterly measured Cylinder liner Wear using the Electronic Liner Diameter Measuring (LDM) Tool.
oProject works.
Prepared plans and drafting works using AutoCAD 2D and 3D.
Prepared Bill of Materials
Project implementation, control and monitoring
o Updated the Mechanical Preventive Maintenance Scheduled using AMOS-D asset management program.
o Data Collection from Asset Management Operating System (AMOS-D) to IBM EAM – Maximo CMMS Specifically on Preventive, Corrective, and Inspection/conditioned-based Maintenance.
Technical Engineer - Mechanical (Engineering Department)
Fresh Fruit Ingredients, Inc. - Fiesta Brands
Food Manufacturing Plant – Coconut Products
Medina, Misamis Oriental, Philippines
March 2011- July 2012
Duties and Responsibilities:
oAssisted supervisors for the technical and documented engineering works.
oDeveloped and implemented the Preventive Maintenance Program of the plant.
oRepair and maintenance of the plant, scheduled and implemented of repair and maintenance jobs. Monitored and controlled the 3 M’s (Manpower, Materials, and Machinery).
oProject works. Prepared plans and drafting works using AutoCAD (2D and 3D). Prepared the Bill of Materials and Labor Cost (BLMC). Implemented, controlled and monitored of the 3 M’s. Planning, scheduling, and monitoring of project using Gantt chart.
oMade summary reports and submit to superior the equipment performance indexes such as: Equipment breakdown or downtime hours.
Appointed for Inventory (Engineering Projects Dept.)
Nestle Philippines, Inc.
Food Manufacturing Plant
Cagayan de Oro City, Misamis Oriental, Philippines
November 2009 - March 2010
oCompleted inventory for equipment or machines in the Engineering Department (e.g. Electric motors, forklifts, hand pallets, stacks and hoists).
oDaily/weekly checked radiation emitted by X-Ray machines in the Coffee and MILKs Filling and Packing Area.
On the Job Trainee (Milks Department)
Nestle Philippines, Inc.
Food Manufacturing Plant
Cagayan de Oro City, Misamis Oriental, Philippines
April – May 2009
oProvide assistance in the MILK’s processing Department.
oMonitor and study for more efficient ways to heat up the glucose heating room.
oDaily checking of MILK’s process waste water pH level.
Organizations/Affiliations
Philippine Society of Mechanical Engineers
oMember Sept. 2010-Present
Junior Philippine Society of Mechanical Engineers:
oTreasurer S.Y. 2008-2009
oMember S.Y. 2005-2010
Seminars/Trainings Attended
On-Site Analysis, Inc. Course for Proper Administration, November 01, 2014
Maintenance and Operation of the OSA4 Analyzer
Al Jaber Engineering L.L.C. - PMV
Al Khor, Qatar
Boiler Operations: Unit Process, Operations and Safety January 23, 2014
Aboitiz Power – Therma Marine, Inc. Mobile - 2
Nasipit, Agusan Del Norte, Philippines
Welding Safety Procedures and Metal Identification Seminar May 23, 2012
Fresh Fruits Ingredients Inc. Conference Room
Medina, Misamis Oriental, Philippines
Automated Boiler Water Treatment Seminar August 11, 2011
Fresh Fruits Ingredients Inc. Conference Room
Medina, Misamis Oriental, Philippines
National Training-Workshop on Energy Efficiency and March 30-31, 2011
Conservation
Department of Energy
Almont Inland Resort, Butuan City, Agusan Del Norte, Philippines
Steam Boiler Operation and Maintenance And December 04, 2010
Basic of Air Dispersion Modeling
Philippine Society of Mechanical Engineers – CDO Chapter
Bufallo Grill and Restaurant, Cagayan do Oro City, Misamis Oriental, Philippines
Thesis/Project/Feasibility Study
Pilot-Static Steering Mechanism for a Single-Seater, Solar Powered-Electric Vehicle
References
Available upon request
Contact this candidate