Electrical Engineer

Resume: ANTHONY (TONY) GLENN ERBE

Current Address: **/** ***.*, ** Village 2,

Soi Siam Country Club,

Nongprue,

Banglamung,

Chonburi 20150 Thailand

Home Address: Bunbury Western Australia

TELEPHONE: + (66-899**-**** (mobile)

E-MAIL: *******@*******.***

NATIONALITY: Australian

INTRODUCTION

Having initially completed two apprenticeships in Electrical and Instrumentation over seven

years, then completing a host of training courses to bring my qualifications to the equivalent of

diploma level, I have since gained 30 years’ experience in these disciplines. These skills were

initially developed in the mining and chemical industries, and have been nurtured and refined in the

oil and gas industry across several countries. Covering the engineering, construction,

commissioning and operations phases of the project lifecycle, I have gained a broad range of skills

which I am able to bring to an organization to fulfill the role and responsibilities as assigned and

provide assistance in any area as required.

My can do, and approachable attitude, combined with the broad range of skills and

experience, along with my understanding of project and operational processes and procedures

enable a valuable contribution to be provided to any organization as can be seen in my work

history following.

-1-

EDUCATION & TRAINING

2013

Moxi Hazardous area Certificate IV

•

2010

• High Voltage Switching Procedures, PTS Training. Western Australia.

Hazardous Area Inspection Course, Inlec Engineering

•

2007

Hazardous Area Inspection Refresher Course, Moxi Australia.

•

2005

Certificate IV in Business Management, QTC Consulting Perth Western Australia.

•

Hazardous Areas Installation Maintenance and Design, MOXi Australia

•

• Micro station Version 7, CAD Education Center Perth

• AutoCAD 2005 Advanced, CAD Education Center Perth

2003

• Introduction to SAP, System fundamentals and Architecture, Conoco Phillips Pty Ltd.

2000

• AutoCAD 2000 Fundamentals, Cad Education Center Perth

• Electrical Contractors License, State Electrical Commission of Western Australia

• High Voltage Switching Procedures, Optec Training Consultants Victoria, Australia.

• Subsea Control Systems Operation and Maintenance course, Kvaerner FSSL

• Triconex Emergency Shutdown & Fire and Gas System Design, Implementation and

Maintenance.

1993

• Train the Trainer, CSBP Training Consultants

• Fisher Control Valves Selection and Maintenance, Western Process Controls

• Instrumentation and Controls Engineering Certificate, West Australian Dept. of Education &

Training

• Taylor Control Systems Mod 30, and Mod 300 Systems design, Implementation and

Maintenance.

1988

• Instrumentation and Control Practices Certificate, West Australian TAFE.

• High Power Electronics Certificate, West Australian TAFE.

• Electronic Soft Starters Certificate, West Australian TAFE.

• Electronic Variable Speed Drives Certificate, West Australian TAFE.

• Electrical “A” Grade Workers License, State Electrical Commission of Western Australia

1985

• Electrical Trade Certificate, West Australian TAFE.

1984

• Electrical Trade Practices Certificate, West Australian TAFE.

-2-

EMPLOYMENT HISTORY

April 13- Present

JKC Ichthys Project Module fabrication Yard

Laem Chabang, Thailand

EPCM Senior E&I Construction Engineer

Ensure Project Safety Compliance and participate in the IIF culture.

•

Ensure Fabrication workshops electrical safety standards compliance.

•

Ensure Module Fabricator construction drawings content complies with project

•

requirements.

Review contractor PDMS Modelling of field run cable trays.

•

Liaise with Engineering for effective prioritisation and closeout of site and technical

•

queries.

Participate with engineering in technical bid evaluation of contractor supplied bulk

•

materials, including junction boxes, electrical fittings, cable tray and ladder, instrument manifold

etc.

Develop effective schedules and organisation charts.

•

Develop contractor work method statements.

•

Develop hazardous area inspection requirements.

•

Participate in development of ITP’s.

•

Dec 09- Feb 13

KJV-G Gorgon Project

Barrow Island Western Australia

EPCM Electrical & Instrument Superintendent & Senior Authorised Electrical Person (SAEP)

• Ensure compliance with HSE, Australian and Client regulations and standards.

• Manage all electrical contractors. Up to six at one time

• Write Permit to work and electrical isolation procedures

• Senior Electrical Isolation Authority (SAEP) for permit to work system.

• Authorisation of HV Switching procedures.

• Ensure contractors complete works as per project schedules.

• Ensure Electrical, Instrument and telecoms installation as per design.

• Resolve early works technical queries, site instructions with support engineers.

• Conduct inspections and sign off of ITP’s and field inspection records.

• Materials callout and inspections.

• Co-ordination of vendor site visits and scope requirements

• Supervise Vendors and Third party contractors

• Conduct System completions, walk down’s and punch listing.

• Commissioning of early works HV and LV electrical generation, Reverse Osmosis and

Waste water instrument and electrical systems.

• Mentoring of Horizon engineers.

Feb 09- July 09

Aker-Clough-Murray & Roberts Joint Venture

Boddington Gold Expansion

EPCM Completions and Turnover Co-ordinator

• Liase with the client to develop requirements of turnover/handover packages of Systems

Completions Folders.

• Write Turnover Execution Procedure

• Develop multi-disciplined System Construction Completion Folders and contents.

• Re-direct construction focus towards completions of Systems.

-3-

Assist with defining system boundaries.

•

Initiate a review and cleanup of Completions database with engineering.

•

Introduce Database Control Management Procedure.

•

Develop Completions database reports

•

Sep 08- Jan 09

Clough Ltd

Varanus Island Repair project (post pipeline explosion)

EPCM Site E&I Superintendent - QA/QC Inspection Coordinator

• Ensure compliance with HSE, Australian and Client regulations and standards.

• Manage and Control contractor inspections and repair of plant & Equipment for Fire

Damage.

• Write ITP’s and Procedures to support Inspection and Repair workscope.

• Liaise with engineering regarding repair and replacement equipment.

• Manage a register of inspections and repairs conducted.

• Manage materials purchases and arrivals inspections.

• Supervise development of repair work scope work packs.

• Schedule and plan work pack implementation.

• Manage contractor workscope execution.

• Co-ordinate workpack completion inspection, punchlist and sign-off.

• Manage Site instruction, design change registers and closeout.

• Prepare system completion and handover dossiers.

Mar 08- September 08

Petromin Engineering Consultants

Electrical Engineering Designer

Pipeline Compressor Stations.

• Develop feasibility engineering design and budget estimates.

• Electrical design of switchgear, cabling and control circuits for various projects.

• Mentoring of Graduate engineers

• AutoCAD design drafting.

• Electrical and instrument equipment selection.

• Cable size and fault current calculations.

• Writing of equipment specifications and datasheets.

• Earthing design.

• Lightning Protection design.

• Develop System ITR’s

• Writing system commissioning procedures

Aug 07- Jan 08

Foster Wheeler Worley Parsons

EPCM Electrical and Instrument Supervisor

Woodside Train 5 LNG

Karratha WA

• Ensure contractors complete works as per project schedules.

• Ensure electrical, instrument and telecoms installation as per design.

• Ensure compliance with HSE, Australian and Client regulations and standards.

• Conduct inspections and sign off of ITP’s and field inspection records.

• Co-ordinate System completions and walk down’s and handovers to commissioning.

• Conduct Instrument Loop checks

-4-

Sep 05- Jan 07

Woodside Energy Ltd

Otway Gas Project Offshore platform and Onshore LNG Plant

This project work covered several project sites:

MMHE Fabrication Yard, Pasur Guadang, Johor Bahru, Malaysia

1.

Client site E&I Engineer

Platform Substructure and Topsides construction and commissioning

2. Toll Port, Geelong, Victoria

Client Site Representative

Platform Remedial works and Removal of Equipment for Installation.

3. Offshore, Bass straight, Australia

Client Representative

Platform Installation and Hookup Company representative

4. Onshore Gas Plant

Port Campbell Victoria

Client Site E&I Engineer

Duties included

• Ensure contractor compliance to Company HSE policy and procedures.

• Review contractor design for BOD specification conformance and functionality and design

appropriate solutions where required.

• Resolve site technical queries and Liaise with Engineering where necessary.

• Accept and attend electrical, instrument and telecoms equipment FAT procedures

• Review and Acceptance of Electrical, instrument and telecoms QA/QC procedures.

• Review and monitor Contractor installation standards and materials for BOD Conformance.

• Monitor electrical, instrument and telecoms installation and commissioning works and

suggest alternatives to achieve best possible outcomes.

• Perform QA/QC auditing functions and manage NCR database.

• Assist in the development of project schedule and budget monitoring.

• Review, comment and accept Commissioning procedures for all electrical, instrument (F&G,

ESD and PCS), process and telecoms systems.

• HAZOB and SIMOPS Reviews

• Review construction/ commissioning schedules and reporting via WINPCS.

• Witness and accept execution of commissioning procedures.

• Review installation engineering procedures, expediting closeout of engineering for

operational readiness

May 05 to Sept 05

Aker Clough Australia

Conoco Phillips Darwin LNG Plant, Australian

E&I Maintenance Engineer

• Development of maintenance strategies.

• Development of Equipment SIL Classifications.

• Participate in Equipment Criticality Reviews.

Jan 05 to May 05

Tanis IPS

Kewdale, Perth

Lead E&I Designer, Ravensthorpe Nickel Water Treatment Plant.

-5-

Design of Electrical drives schematics and switchboards, including ABB M102 Motor

•

Starters and tagging.

Design of site earthing system.

•

Design of Electrical and instrument cable ladder systems

•

Design and selection of Fieldbus instrument systems and integrated signal cabling.

•

Develop E&I cable schedules.

•

Develop and compile MTO’s (material Take offs)

•

Develop QA/QC procedures and records.

•

Jul 04 – Sep 04

Azerbaijan International Oil Company

Baku, Azerbaijan

Drilling Platform Lead Completions and Turnover

PIMS Completion database Management.

• Development and compilation of Handover Dossier requirements in consultation with the

Client.

• Develop and management of all disciplines for:

o As-built drawings registers and compilation.

o Site design change request procedures and closeout.

o Site Software change request closeout procedures.

o Certification registers and acceptance.

o Ensure conformance to project QA/QC Requirements.

Mar 03- Jun 04

Bayu Undan TIGA JV

Perth Office, Phillips Petroleum Bayu Undan Development in the Timor Sea

2x 20 000t platforms, remote operated wellhead platform and FSO

Hook-up Engineer

• Develop job cards and schedule tasks for all base scope hook-up work in SAP database.

• Travel to Korea for transfer of multidiscipline carry over work into database and assign man-

hours.

• Assist with cataloging of inventory stock

• Make up required spares inventory with minimum and maximum levels.

• Receive and review DCN’s and develop job cards, input into the plan (WINPCS) and

allocate materials, man-hours and required documentation and QA/QC inspection ITR’s.

• Check design changes for operability and execution on a hot platform.

• Develop instrument Index for marine installation.

• Carry out Budget estimates and Engineering for modifications and upgrades to various

systems on the FSO vessel.

• Design major modifications to the Ballast and Cargo control system for the FSO vessel.

• Design modifications to production platform during initial start up to maintain operational

integrity.

• Introduction and working knowledge of Intools database.

Apr 02- Dec 02

Crestclough Engineering Pty Ltd

Bangkok office, Thailand and offshore Myanmar.

Premier Oil, Yetagun Platform in the Andaman Sea.

-6-

6000T Gas & Condensate platform with FSO vessel. Solar turbines & compressors with Siemens SLC5000 control

system

Instrument & Electrical Commissioning Engineer/Superintendent.

Phase 2 upgrade of platform to increase production from 200 to 300 mmscfd Brown fields Project.

• Develop Inspection and Test Records (ITR’s), and associated Procedures.

• Control contractor work activities in line with operators’ operational requirements.

• Accept Mechanical Completion Inspection and Certification.

• Define Phase 2 Upgrade Commissioning Boundaries.

• Witness factory Acceptance tests.

• Check design for functionality and implement design changes where required

• Write Commissioning Procedures for all systems upgraded for Phase 11. Major items

included Taurus 60 4.2MW Turbine Generator, and Mars 100 Turbine with a MAN TURBO

Compressor, along with various utilities equipment to improve availability / redundancy.

• Develop Commissioning Schedules, Plans and Procedures.

• Supervise offshore Commissioning of all Systems with Vendors, Local and expatriate labor.

• Co-ordinate and liaise with Operations and Vendors

• Training of local technicians.

Sep 00- Jan 02

Brown and Root Energy Services Pte Ltd

Malampaya Topsides Gas to Power Project.

9000T CGS platform with condensate storage and 2xRB11 export compressors.

Fisher Fieldview PCS with Triconex Fire and gas control System.

Sembawang Shipyard Singapore and Offshore Palawan Island, Philippines

Instrument Construction / Commissioning Superintendent

• Define and manage contractors’ installation of telecoms’, Instrumentation & Fire and Gas

Field Devices.

• Design interface connections where required via intools database.

• Target critical systems for commissioning and co-ordinate mechanical completion and

inspection.

• Co-ordinate and Supervise Vendors onsite installation and commissioning. Subsea control

Systems package, Condition Based monitoring Package. Reciprocating Compressors

Package.

• Carry out Instrument commissioning tests and support plant Start-up.

• Training of local technicians in trade practices and fault finding.

Mar 00- Jun 00:

Marine Offshore Survey and Commissioning Pty. Ltd.

Transocean, Sedco-Energy Express Series Semi-Submersible Drilling Units, Construction Site.

Brest Naval Shipyard, Brest, France

Electrical Inspector

• Carry out construction inspections and make installation recommendations.

• Mud pumps Systems, Air Distribution packages.

• Review Operating procedures for optimum availability of equipment.

• Maintain Excel database of inspections and recommendations.

-7-

Nov 97- Dec 99:

Crest Commissioning Pty. Ltd.

Woodside Energy, Northern Endeavour FPSO

This project work covered several project sites:

Samsung Shipyard, Koje Island, South Korea.

Instrument Commissioning Superintendent, Marine Systems.

• Source and review vendor documentation for BOD conformity.

• Check design for specification conformity and correct where required.

• Inspection of installation for mechanical completion.

• Develop and implement commissioning test procedures for Cargo and Ballast System,

Cathodic Protection Systems, Inert Gas systems, Reverse Osmosis- Potable water systems,

and Emergency Generation system.

• Manage Y2K testing of all Microprocessor date based controllers for integrity over specific

dates.

2. Sembawang Shipyard, Singapore.

Honeywell TDC 3000 control System, Triconex Fire & Gas/ ESD system

Instrument Construction Superintendent

• Develop and write site instrument calibration procedures.

• Manage materials arrival and inspections.

• Manage contractor’s installation of telecoms, process Instrumentation, ESD & Fire

and Gas Devices.

Manage Design of Instrument and telecommunications supports.

•

Review and correct package interfaces for offtake metering system, Inert gas system,

•

Cathodic Protection System, Subsea Control System, Fire water Pumps, Cargo and Ballast

System.

Instigate fire and Gas system review and make recommendations for equipment

•

coverage.

Develop and co-ordinate Commissioning systems boundaries for mechanical

•

completion and inspection.

Training of local technicians in trade practices and fault finding.

•

Co-ordinate and Supervise Packages Vendor callout.

•

3. Offshore, Laminaria field, Timor Sea.

Instrument / Electrical Acceptance Engineer

• Carry out final Systems Inspection and Punch listing.

Carry out Systems Acceptance on behalf of Operations.

•

Sep 96- Jan 97

Crest Commissioning Pty. Ltd.

Ampolex, Wandoo B Concrete Gravity Substructure Oilfield Development

Perth office and on-site FEL’s Shipyard, Singapore.

Instrument & Electrical Inspector.

• Review offshore hookups scope and write job cards for implementation.

Carry out onsite job card verification.

•

Carry out onsite inspection and acceptance of test records.

•

Validate and Supervise correction of punch list items.

•

-8-

Aug 95- Nov 97

Woodside Energy’s Cossack Pioneer FPSO

Keppel Shipyard, Singapore and offshore Western Australia.

Instrument / Electrical Specialist

Supervise calibration and installation of instruments, displacer levels, valves, etc.

•

Co-ordinate inspection and compilation of test reports.

•

Carry out pre-commissioning tests and compile status and fault reports and field

•

instrumentation.

Develop commissioning and start-up procedures.

•

Supervision of vendors for installation and commissioning of Cargo Control System,

•

HVAC System, Rigid Arm Swivel Installation and commissioning of Hydraulics systems.

Carry out commissioning and start-up procedures.

•

Develop and write maintenance procedures and validate.

•

Engineer maintenance and breakdown repairs as required.

•

• Write and validate maintenance procedures.

Write and validate shutdown and fire & gas critical function testing procedures.

•

HV Motor driven Export Compressor with CCC Controls systems.

•

Air Start Solar Turbine driven generators.

•

Corrective works for Kvaerner FSSL Subsea controls system operations and controls.

•

Carry out planning for maintenance and shutdown activities.

•

Honeywell TDC3000 series control System

•

Apr 95- Jul 95

Swispec Electrical and Instruments Pty. Ltd.

Simcoa Silicon Smelter at Kemerton, West Australia.

Instrument / Electrical Technician.

Provide holidays and shift coverage for maintenance and breakdowns.

•

Maintain HV reticulation and associated capacitance banks for power factor

•

correction.

DC molten arc chamber.

•

SCADA PLC Control Systems

•

Jun 94- Jan 95

AOC Australia Pty. Ltd.

Woodside Energy’s Goodwin A gas platform offshore Karratha.

Instrument Technician.

Installation and calibration of offshore plant instrumentation.

•

Inspection and test reports on instrument and fire & gas devices function and

•

calibration

Carry out cold at hot loop checks on instrument and fire & gas devices.

•

Carry out Operational Test Procedures.

•

Bailey Network 90 Control System.

•

-9-

Contact this candidate