Engineering Piping

RESUME

A.RADHAKRISHNAN

Mobile: +971-*********

Email: acpp4q@r.postjobfree.com

OBJECTIVE

Having 10+ years experience in Piping Drafting/Designing.

Seeking a position as a Piping Designer where I can apply my skills

and knowledge in the field towards the growth and development of the

organization.

KEY SKILLS

* Preparation of Piping Layouts, GA drawings, Piping Fabrication

Drawings, Isometrics, P& ID

* Proficient in 3D modeling on PDMS covering Equipment and Piping

modeling. 3D modeling of Equipment and Piping in Cad-works.

* Detailed Engineering Piping Drawing and process equipment drawing

(Indirect heater, vessel)

* Preparation of detailed drafting and producing fabrication drawings

for pressure vessels.

* Compile the Piping Isometrics & Fabrication drawings for Test Packs.

* Review of Vendor Drawings. Revised PI&D drawing base on comments.

* Preparation piping material takes off requirements in accordance with

Company specification.

* Co-ordination with the clients for their detail engineering and

technical Queries.

* Prepare the Piping & instrumentation diagram and process flow diagram.

* Preparation the line list and valve list as per P & ID diagram.

* Pressure design of pipes and fittings as per B 31.3.

* Preparation Piping Layouts & Isometric drawings for specific system.

* Setup all templates for P&ID drawing base on Client requirement.

* Extraction of Isometrics using ISO-Draft from PDMS.

* Generating isometrics from piping general arrangement & detailed

piping isometrics.

* Preparation the pressure vessel general assembly, detail and nozzle

orientation.

* Proficient with AutoCAD, Plant Design Management System (PDMS) and CAD

Worx.

* To preparation GA drawing by using PDMS DRAFT

CAREER PROGRESSION

1. Concern : GULF PIPING COMPANY W.L.L, ABUDHABI,U.A.E

(Onshore/Offshore Company)

Roll : Piping Designer

Period : 8-Apr-2012 to till date

Projects Involved : Semi Submersible Drilling Rigs, Fixed

Platforms,

Offshore Pipe Rack & Modules,

TDS 2000, Dynamically Positioned Semi-Submersible Drilling Rig

Employed as Dedicated Piping designer for Rig I & Rig II (Dynamically)

Positioned Semi-Submersible Drilling Rig)

* Pontoons and Pontoon Internal Structures like Ballast Tanks, Thrusters

rooms, Pump Rooms Accommodation Modules and Decks.

* Vertical Columns and Horizontal Bracings

* Bulk Heads

* Sub Assemblies

* Mud Tanks, Brine Tanks and Potable Water Tank

DUTIES &

RESPONSIBILITIES

* Preparation piping layout from P&ID, Equipment layout (Pumps, Vessels

& Tanks).

* Modify existing piping discipline drawing as required by discipline

engineers.

* Generate and modify other pipping discipline documents (e.g. line

lists, bill of material, tie-in schedule, etc).

* Prepare as- build final drawing as per site mark up.

* Maintains engineering database information associated with drawings.

* MTO and 3D Model using Intergraph Plant Design Management System

(PDMS)

* The 3D model integrates 3D basic design information of disciplines,

such as equipment, piping and structure.

* Proficient in 3D modeling on PDMS covering Equipment and Piping

modeling.

* Piping study & Preparation of Piping General Arrangement Drawings.

* Coordinate the work of junior engineer. Work completion reports.

* Preparation of weekly Progress Report. Comments compliance & revisions

follow-up.

PROJECTS HANDLING

* UPPER ZAKUM 750K ISLANDS SURFACE FACILITIES PROJECT-EPC2

ZAKUM DEVELOPMENT COMPANY, Abu Dhabi

* National Drilling Company (NDC-AL-YASAT-RIAP)

* Abu Dhabi Marine Operating Company (Addition Of 10 New Wells On

Existing Zakum Wht's

Main Access Deck Extension Details,

* Odebrecht Drilling Oil & Gas TDS2000 plus Semi-Submersible.

* Single buoy moorings INC Marly- Switzerland.

* Escravos Gas to Liquids Project. Escravos-Nigeria.

CAREER PROGRESSION

2. Concern : CONSOLIDATED CONTRACTORS COMPANY

(Under deputed ETA INFOTECH L.L.C)

Roll : Piping designer

Period : 12-Aug-2007 to 29-Feb-2012

* Preparation piping layout from P&ID, Equipment layout (Pumps, Vessels

& Tanks).

* Extracting Piping Isometrics and checking with P&ID.

* Designing and Detail Engineering of Pipe Supports and Interact with

Stress Department.

* Coordinated design criteria with engineering and planning group in

accordance with the contractual specifications.

* Responsible for Site run isometrics. Preparation of Piping Supports &

BOQ.

* Preparation of weekly Progress Report. Comments compliance & revisions

follow-up.

PROJECTS HANDLING

* Abu Dhabi company for onshore oil operations( ADCO) Bu Hasa Shuaiba

Unit "H"

Water Injection Enhancement.

* Dolphin Energy Ltd, Eastern Gas Distribution System (EGDS).

EGDS Upgrade EPC Works for East and West Systems.

3. Concern : BS& B TECHNOLOGY PRIVATE LIMITED, CHENNAI

Roll : Piping designer

Period : 10-Sep-2005 - 15-Jun-2007

Projects Involved : Indirect Heater, Tank Pipe Rack & Modules,

and Jackets.

DUTIES &

RESPONSIBILITIES

* Preparation of Piping Layouts, GA drawings, Piping Fabrication

Drawings, Isometrics, P& ID

* Detailed Engineering Piping Drawing and process equipment drawing

(Indirect heater, Separator, tank)

* Preparation of detailed drafting and producing fabrication drawings

for pressure vessels.

* Compile the Piping Isometrics & Fabrication drawings for Test Packs.

* Review of Vendor Drawings.

* Co-ordination with the clients for their detail engineering and

technical Queries.

PROJECTS HANDLING

* 500000&1000000 Btu / hr Indirect Heater for BS&B (Stock), Canada.

* Two Phase Horizontal, Separator for M/s Tridyne projects Corporation.

* Three Phase Horizontal Separator for M/s Chesapeake Engineering Ltd,

* Amine Contactor for Millenia Resources, Canada.

* Replacement Heater for SAIPEM, Canada.

4. Concern : SHIMI DESIGNS AND CONSULTING PVT LTD, CHENNAI.

Roll : Piping Draftsman

Period : 7-Jun-2003 - 13-Aug-2005

SHIMI Designs and Consulting Engineers Pvt. Ltd. Chennai (India)

is a Private Limited Company Registered under Indian Companies Act

1956. Our company holds a wealth of Skilled, well trained, Quality

Professionals Engineers, for the Purpose of providing Engineering

design and drafting Services to the Petrochemical industries.

DUTIES &

RESPONSIBILITIES

* Preparation of Piping Layouts, GA drawings, Piping Fabrication

Drawings, Isometrics, Piping & instrumentation drawing.

* Detailed Engineering Piping Drawing along with material takes off.

* Preparation of pipe support drawing and pipe rack drawing.

* Preparation the pressure vessel general assembly, detail and nozzle

orientation.

* Responsible for Site run isometrics as per QC mark up.

* Review of Piping layout and isometrics drawing.

* Co-ordination with the clients for their detail engineering and

technical Queries.

* Conduct meeting with client to coordinate the site issues.

* Preparation of weekly Progress Report. Work completion reports.

PROJECTS HANDLING

M/s SHREE SHYAM PULP & BOARD MILLS LTD..,

Inter Connection piping layout for 6MW, Steam Turbo Generator.

M/s EURO CERAMICS LTD..,

Inter Connection piping layout for 10MW, Steam Turbo Generator.

KMS POWER (PVT) LIMITED.

Sattenpally, Andhra Pradesh.

5. Concern : RANE (MADRAS) LIMITED, CHENNAI

Roll : Apprentice trainee

Period : Oct 2001 - Apr 2003

Projects Involved : Diesel engine, gear box, breaks,

Breaks India limited

TVS Lucas limited

ACADEMIC

CREDENTIALS

Diploma of Engineering (D.M.E) in Mechanical Eng 1998-2001

Government College of Polytechnic, Tamil Nadu, India 85.92%

H.S.C (10+2) 1997-1998

Little flower Higher Secondary School, Tamil Nadu 80.33%

COMPUTER SKILLS

. Drafting Packs : AutoCAD 2013, SpoolGEN- V5.

. Modeling Packs : PDMS 12.0, CADWORX 2007, NAVIS WORKS,

PERSONAL DETAILS

Father's Name : Mr.S.Arumugam

Date of Birth : 27th July 1983

Marital Status : married

Nationality : Indian

Languages Known : English, Tamil (Speaking, Reading and

Writing)

Permanent Address : 2/93, Nakkambadi,

Ariyalur (Dist),

Tamil Nadu, India.

Passport No : L7871147

Place of Issue : Abu Dhabi

Date of Issue : 16.04.2014

Date of Expiry : 15.04.2024

Visa Status : Employment

Visa Expire : 16.04.2016

I, hereby declare that the information given is correct to the best

of my knowledge and belief and that I have not withheld any information

that might affect my suitability for employment.

Radhakrishnan

[pic]

Contact this candidate