Engineer Process

Laurentiu Badea

** ********** ******,

Vaughan, Ontario, L4H1T5, Canada

Phone: 647-***-****

E-mail: acpmfq@r.postjobfree.com

May 2015

Ref: Process/Project/Commissioning Engineering opportunities

Dear Madam/Sir;

I am an experienced process and facilities engineer with more than 25 years

experience in FEED, detail design, supervision, commissioning, start-up and

routine operations.

Canadian and EU citizenships.

The following highlights of my background maybe helpful in scrutinizing my

application:

. Managed process and plant operations for upstream oil facilities (H2S

content), gas treatment and processing, heavy petrochemical, fertilizers

and utilities plants

. Conceptual and feasibility studies, FEED and detail design experience for

upstream and utilities, sulphur forming, storage and loading facilities

and gas plants (with H2S content); Involved in budget and cost analyses

for various projects.

. Working experience with the relevant international codes (API, ASME,

ASTM, NACE, NFPA, Shell DEPs, (including RoK standards)

. Provide PHA Leadership; organized and lead HAZOP, Design Review and SIL

analysis.

. Hands-on and supervision experience with the Process and Pipe-network

simulators as well as with preparation of all Process deliverables

including CTR and EDSR.

. Pre-commissioning, commissioning, start-up and normal operations of

utilities, off-sites, gas plants and waste management systems

. Experience with state-of-the-art control equipment (DCS, Honeywell TDC,

PLC)

. Very good computer skills (process simulators, project management,

drafting, etc.)

. Working experience was gained in ex-Russian Federation countries

(Kazakhstan, Uzbekistan, and Azerbaijan), Libya, Canada, Romania and

Nigeria in different positions like: lead, principal and senior process

engineer, commissioning specialist, operation supervisor, field support

engineer, etc.

. Demonstrate reliability, adaptability and constant improvement in

projects across a broad range of geographic, technical and cultural

differences.

I hope a review of my enclosed resume will identify my suitability for your

company. I would welcome the opportunity to discuss in person my CV and to

explore how my experience could be beneficial to your client. I look

forward to hearing from you.

Sincerely,

Laurentiu Badea

Laurentiu Badea

96 Montebello Avenue, Vaughan

Ontario, L4H 1T5, Canada

Phone: 647-***-****; E-mail: acpmfq@r.postjobfree.com

SUMMARY

Over 25 years experienced Process Engineer in Oil and Gas / Petrochemical

industry with highly competitive technical and team management experience,

and in-depth experience of process design, development, regulatory

compliance, manufacturing integration, technology and strategic planning.

Provide all the Process Engineering inputs and deliverables for a range of

projects (ranging from feasibility and concept studies through to FEED,

detail engineering and process optimization of existing assets) and ensure

timely completion to the required quality, and to the defined client

technical specifications/ codes & standards.

PROFESSIONAL PROFILE

Process / Commissioning / Facilities Engineer with FEED and Detail

Engineering experience:

. Managing process and plant operations for upstream oil facilities, gas

treatment and processing, heavy petrochemical, fertilizers and utilities

plants

. Conceptual, feasibility and VIP studies experience; FEED and detail

design experience for upstream oil and gas processing and utilities

facilities

. Commissioning, start-up and routine operation of large utility and gas

processing systems (water and waste water treatment, air separations,

steam producing and distribution, gas treatment, compressing and

sweetening systems); experience in design and operation of high H2S

content facilities with stringent HSE requirements

. Perform/review technical analysis and recommend best option (technically

and economically) for surface facilities design and FDP.

. Hands-on experience with the process plant simulators (HYSYS, PROII,

ChemCad, Design II, HTFS/HTRI) and pipe-network simulators(PipeSim

Schlumberger, PipePhase)

. Plants revamping, field engineering, material requisition, feasibility

and bottleneck analysis

. Hand-on experience with the relevant international codes (API, ASME,

ASTM, NACE, NFPA, Shell DEPs, RoK, etc.)

. PHA leadership; preparation and governance for HAZOP, Design Review, SIL

reviews.

. Engineering supervision of process improvements, troubleshooting and

design enhancements; Identify & pursue opportunities to optimize

utilization or debottleneck existing assets as appropriate.

. Technical interfaced between management, constructor and vendors

. Dealing with routine monitoring of the technical aspects of plant

operations: process pre-commissioning, commissioning, start-up and

normal running

. Experience with state-of-the-art control equipment (DCS, Honeywell TDC,

PLC)

. Training of technical staff and operating personnel

PROFESIONAL EXPERIENCE

OMV/Petrom Romania - Bucharest Sep.2012 - current

Surface Facilities Team Leader

FRD (Field Re-development) Phoenix Project

. Manages surface facilities project work, engineering changes,

improvements and enhancement activities.

. Accountable for completion of surface facilities project's work in

conformance with Statement of Requirements, in a safe manner and within

approved budget.

. Assigns the relevant engineering work packages to the engineering team

members.

. Make sure that Company's HSEQ policies and procedures are implemented in

all re-development projects activities.

. Liaises / coordinates planning of engineering activities with Development

Manager, liaises with functional departments (HSEQ, etc.), manages all

engineering interfaces.

. Proposes improvements in design, operation & maintenance modes in

accordance with the applicable safety & engineering standards.

. Controls and coordinate performance of engineering contractors.

Worley Parsons Kazakhstan - Atyrau Dec. 2007 -

Aug.2012

Principal / Lead Process Engineer

. Provide governance and supervision of process related activities for FEED

and detail design phases on Flared Sour Gas recovery and Sulphur

Expansion projects for Tenghiz field (Chevron)

. Prepare Process Engineering Cost, Time and Resource (CTR) catalogue.

. Lead the Process Engineering team assigned to the EWRP (Eskene West Rail

project) AGIP - Utilities and Sulphur Remelting facilities.

. Maintain and monitor Process Engineering deliverables and progress

against plan.

. Supervise the completion of deliverables (including block diagrams, PFDs,

UFDs, P&ID's, H&MB's, data sheets and utilities reports), ensuring

adequate QA/QC is applied and that an auditable comment close-out trail

is maintained;

. Ensure that necessary process design philosophies are developed and

maintained in FEED, according with the relevant Codes and Standards;

. Interface with other disciplines to ensure integration of activities and

final provide Process inputs during detail design phase.

. As Lead Discipline organize, prepare HAZOP and Design Review and SIL

analysis.

. Perform and check Process simulations and Heat & Mass Balance as

required. Perform and check Equipment sizing calculations; check PFDs,

P&IDs, Process data sheets, and other Process deliverables.

Eni Oil Libya (AGIP) - Onshore Projects Division Dec. 2006 -

Nov.2007

Lead/Senior Process Engineer

A/100 Low Pressure Facilities project - 150mil. Euros

. During tendering stage, review enquiry documentation from client together

with Scope of Work; raise queries where there is lack of clarity;

interface with other disciplines to ensure integration of activities and

final provide Process inputs during bid preparation.

. Coordinate the technical bid evaluation process and prepare report for

Tender committee.

. Participate in preparing FEED package. Develop Process Design Basis based

on scope of work, and subsequent handle bidders' clarifications.

. Participate in VAR for the project and provide the necessary process

engineering support.

. Organize and lead HAZOP review and other safety studies and analyses and

provide process input as required.

. After award of Project, carry out allocated duties related to the

preparation, checking and issuing of Process Engineering deliverables.

This responsibility includes site visits as required and close

coordination with other engineering disciplines.

. Perform and check Process simulations and Heat & Mass Balance as

required. Perform and check Equipment sizing calculations; check PFDs,

P&IDs, Process data sheets, and other Process deliverables.

AGOCO Libya - Operation Department May.2003 -

Dec.2006

Senior Process Engineer

Projects:

Gas Utilization and Condensate Stabilization Feasibility Study

. Report to the Operation General Manager for all operations activities

with concentration on process optimization and economics. Participate in

preparing FEED deliverables for the approved revamping projects for

upstream oil fields and gas processing and utilization.

. Propose process improvements, troubleshooting, optimization and design

enhancements and bottleneck studies for company upstream oil and gas

fields on-shore facilities; prepare or modify process drawings (PFD,

P&IDs, etc).

. Prepare detailed design Process deliverables; perform piping system

hydraulics calculations using PipePhase and PipeSim simulators; also

involve in relief and flare systems design evaluations and enhancements.

. Assist Field Superintendent in development of work scope and execution of

plant turnarounds including: develop procedures for work while down,

ensure proper isolation of equipment prior to maintenance activities,

maintain timelines and be flexible and creative as problems occur.

Azerbaijan -Salyan Oil Co. - Operations and Maintenance Dept. Nov.2002

- Apr.2003

Senior Process Engineer

. Involved in assessment and feasibility studies of Upstream Oil and Gas

bid package projects for Kyursengi and Karabagly oilfields; in this

capacity work independently and handle process activities on projects,

like going for site visit, handling Client comments, client co-

ordination, preparing process study reports, reviewing or modifying

process drawings(PFD, P&IDs, etc).

. Carried out performance process simulations using HYSYS for gas plant

(Amine regeneration, Glycol units and Sale Gas dew point checking);

Prepared/modified heat and mass balances, pipeline calculations and

equipment sizing (HYSYS, PipeSys, ChemCad simulators)

. Also, involved in the commissioning and start-up operations for Process

water treatment, Condensate stabilisation, Dew Point Control, Fuel gas

sweetening and dehydration and amine regeneration

. Supervision activities in Line and Equipment Chemical Cleaning and Punch

List; Participated in System Hand Over/Acceptance List preparation;

. Participated to plant start-up; Involved in plant day to day operations.

Shurtan Gas Chemical Complex Project, Shurtan, UZBEKISTAN Aug. 2000 -

Sep.2002

Commissioning/Startup and Operation Specialist for Utilities Plant

. As a commissioning specialist, I was involved in elaboration of

procedures, and supervision for precommissioning works made by

subcontractors for following areas Utilities and Off-Sites, for following

activities:

-washing, blowing of the units circuits

-chemical washing of compressors circuits and equipment's

-equipment inspection: vessels, columns and tanks

-instrument loops checking and testing of PLC, ESD,DCS logic's for

compressors, dryers system, boilers furnaces and other equipment's

(pumps, fans etc);

. Responsible for the on-shift operations and troubleshooting of the

Utilities Plant

. Managed and controlled the water treatment plant;

. Monitoring of clarifier operations, water filtration and chemical

addition systems.

. Steam generators, natural gas heaters, heat exchangers, vapor recovery

systems, chillers, waste water treatment, scrubbers, pumps, operating

Atmospheric towers and flash recovery tower

Endo Food Technologies TORONTO

Jun.1997 - May.1999

Plant Supervisor

. Reviewed all process parameters and finalized the operating procedures

for the automated food grade production facility

. Initiate, following-up, and interpreting results of lab evaluations used

to improve product performance, develop new formulations, prepared

statistical process reports

Canada Colors and Chemicals Ltd. TORONTO

Oct.1996 - Mar.1997

Quality Control Advisor

. Prepare technical product documentation as per ISO 9002 requirements

. Assess company's product analysis methods against ASTM / ISO test methods

Chiyoda Corporation (Japan)

Mar.1994- May.1996

ELEME PETROCHEMICAL COMPLEX -SHELL NIGERIA - Utilities Section

Plant Shift Supervisor / Process Engineer

Responsible for daily operation of the following utility systems:

Water Treatment and Supply System for steam generation boilers

Recovery Water Cooling System (10 draft cooling towers and chemical

processing)

Nitrogen Generation System (liquid air separations), Sludge

Incineration Unit

Waste Water Treatment, Instrument Air, Fuel Gas, and Flare Systems

. Supervised two technical teams during the commissioning of the above

systems

. Trained and then supervised the operators of the systems under

responsibility

. Executed back-up operations and finalized the Operation Procedures for

the Commissioning Manager approval

. Performed simulation of processes using DCS software on Yokogawa PLC

system

Petrom - PetroBrazi Petrochemical Division - Ploiesti - Romania

1985 -1994

Petroleum refinery and petrochemical production complex (6M Tons/y crude)

Petrochemical Division - Dimethyl Terephtalate Plant

Oct.1991- Mar.1994

Plant Superintendent / Revamp Engineer

. Responsible for 4 foremen and 40 operators on a DMT throughput of 150

tons/d

. Developed the issue for revamp stage the Process and

Utility P&ID's, performed hydraulic

calculations, PSV and PSE mechanical sizing and line

designation tables

. Prepared statistical reports and maintenance scheduling for Plant Manager

approval

. Leader of the Operation Review Team during the implementation of these

plant improvements

. Responsible for the training programs of technical staff and operators

Petrochemical Division - Phenol and Acetone Plant Oct.1987

- Oct.1991

Production Engineer/Process Engineer

. Responsible for the plant operation and the monitoring of solid, liquid

and gaseous waste discharges (100 tons/d plant output)

. Carried out the design upgrading plant activities

. Coordinated production activities related to the replacement of an analog

control system with a digital one (Honeywell TDC-2000)

. Involved in identifying the relief loads and bottlenecks, PSV's size

checking for new loads, sizing discharge laterals and checking plant

relief header for the revised loads.

Petrochemical Division - Technical and Marketing Department

Dec.1985 - Oct.1987

Process / Application Engineer

. Responsible for the technical review of FEED projects during the

implementation of major plant/process modifications for the Petrochemical

Division

. Sized and then prepared process data sheets for new equipment (pumps,

exchangers, control valves and pressure relief valves).

. Coordinated with the other involved disciplines and performed technical

bid evaluation for the equipment.

. Organized Field data collections and evaluations and prepared

statistical monthly reports.

Petrom - DoljChim - Craiova - Romania

1982- 1985

Process Engineer - N.P.K. Complex - Fertilizer Manufacturing Plant

. Monitor the process (control room and production area) and maintained

inventory status for the complex (150 tons/d of various fertilizers)

. Produce the preliminary design (process flow diagram and material and

energy balance) of a phosphoric rock grinding plant

EDUCATION

. Master degree in Chemical Engineering. Major: Technology of organic

substances University of Timisoara, Romania

. Analyst programmer and DB management training course 1991-1992,

National Institute for IT, Bucharest Romania

INDUSTRIAL TRAINING

PHA Leadership Training - Dyadem - Toronto, Canada

D.C.S. Training on YOKOGAWA 100

Accident Control for Supervisors

Analytic Troubleshooting

Flammable Liquids Firefighting

Permit Systems and Gas Testing

GAS SAFETY, H2S & MINIFILTER TRAINING COMPLETED AT TENGIZCHEVROIL,

KAZAKHSTAN.

Contact this candidate