CURRICULUM VITAE
S.SIVA
Phone No : +91-994******* ; +91-978******* India Mob
Email ID : acpg9l@r.postjobfree.com;acpg9l@r.postjobfree.com
POST APPLIED FOR : MECHANICAL TECHNICIAN
Objective:
I have gained a good breadth of experience with the profession and am
keen to tackle any long or short term contracts available in the near
future. I am a dedicated worker, an excellent timekeeper and enthusiastic
in my search for new challenges. I am prepared to consider a range of
opportunities commensurate with my experience gained thus far.
8+ years of Oil&Gas and Plant maintenance experience
with expertise in the following Equipment such as Gas Turbines, Steam
Turbines pumps, Diesel Engine, Pumps and compressors & Static Equipments.
Professional Qualification:
ITI - Mechanical
DME (Diploma Mechanical Engineering)
Academic Qualification:
Higher Secondary certificate (H.S.C)
Safety Courses:
> Personal Safety and Social Responsibilities (PSSR)
> Personal Survival Techniques (PST)
> Elementary First Aid (EFA)
> Fire Prevention and Fire Fighting (FPFF)
> Helicopter Underwater Escape & Sea Survival (HUET)
> Safe Scaffolding Erection & Dismantling
> Safe MEWP Operation
> Confined space
> H2S
> HSE (PDO)
Employment History:
Designation : Mechanical Technician (Maintenance)
Client : Npcil Ltd, Koodankulam, India
Period : July 2014 To Still Date
Contractor : Enmas Ltd
Designation : Mechanical Technician (Onshore) Shutdown
Client : Harouge Oil Operations
Period : Feb 2014 To Mar 2014
Contractor : Muhringer Industrial Services
Designation : Mechanical Technician (Onshore) Shutdown
Client : Caterpillar Inc - Mantrac
Period : Oct 2013 To Dec 2013
Contractor : Mantrac Group (Iraq)
Designation : Mechanical Technician (Onshore)
Client : RasGas Limited (Qatar)
Period : June 2012 to Aug 2013
Contractor : Qatar National Facility Services (Qatar)
Designation : Mechanical Technician (Onshore)
Client : CAIRN ENERGY INDIA PVT LTD
Period : Nov 2011 to Apr 2012
Contractor : Brunel India Pvt Ltd
Designation : Mechanical Technician (Onshore)
Client : Gasco (Habshan - UAE)
Period : Dec 2010 TO May 2011
Contractor : TAWREED (UAE)
Designation : Mechanical Technician (Onshore)
Client : OXY Oman LLC (Oman)
Period : Feb 2010 to Oct 2010
Contractor : TOCO (The Oman Construction Co LLC)
Designation : Mechanical Technician - Construction (Onshore)
Client : Sabic Groups Company(Saudi Arabia)
Period : Sep 2006 to Dec 2009
Contractor : Nasser S Al-hajri Corp
Designation : Mechanical Technician (Offshore)
Client : ONGC (Mumbai)
Period : Aug 2005 to Apr 2006
Contractor : SS Construction (Mumbai, India)
EQUIPMENTS HANDLED:
PUMPS:
Minor & Major Inspection Tasks:
Assembly, disassembly, check and adjust the installation and functioning
clearances, evaluate the wear, damage state of
a) Having relevant experience in maintenance in all types of pumps such
as centrifugal
& reciprocating pumps.
b) Obtaining a complete check list of the dismantled equipment and keep a
record of the same.
c) Inspect the condition of rotating parts namely shaft, sleeve,
impeller, oil deflectors, wear rings, bearings (thrust & radial),
coupling and stationary parts such as casing stuffing box, distance
pieces and bearing housing.
d) Renewal of mechanical seals replacement of rotor checking wearing and
throat bushes, bearing clearances
e) Maintaining the required float in multistage pumps.
f) Checking the end play, squarness and concentricity using a dial gauge
while pump assembly.
g) Hydro test of pumps to determine mechanical seal and casing leaks.
h) Over hauling of reciprocating pump such as plunger pump & diaphragm
pump including renewal of plunger packing, oil seals, suction
discharge valves checking & servicing.
MECHANICAL SEALS:
a) Assembling, reconditioning and replacing all type of Mechanical seals
such as single double, tandem and cartridge seals, having single,
multi-spring and bellow type.
b) Renewed seal faces (primary ring & mating ring) and maintained
operating length lapping seal faces to the required finish.
CENTRIFUGAL COMPRESSORS:
Minor & Major Inspection Tasks:
Assembly, disassembly, preventive maintenance, troubleshooting
& overhauling activities, installation and functioning clearances, evaluate
the wear, damage state of
a) Coupling, lubricated-tooth and dry-elastic type.
b) Thrust bearings and Journal bearings, lobes and tilting pads types,
with direct or pressurized lubrication systems.
c) Oil seals, Gas seal, labyrinth, honeycomb types, Rotors, impellers,
Diaphragm or diaphragm bundle and volutes
d) Check and adjust the installing clearance of Dry gas seal and Oil film
seals
e) Check and adjust the correct alignment conditions between driver and
driven units.
f) Respecting the minimum axial clearance between impellers and diaphragm
and delivery dimensions of volute.
STEAM TURBINE:
Minor & Major Inspection Tasks:
Assembly, disassembly, preventive maintenance, troubleshooting
& overhauling activities, installation, functioning clearances, evaluate
the wear, damage state of
a) Coupling, lubricated-tooth and dry-elastic type.
b) Thrust bearings and Journal bearings, lobes and tilting pads types,
with direct or pressurized lubrication systems.
c) Rotor, Inner casing, stator blades, Oil and steam labyrinth seals
d) Emergency stop valves, Regulation valves assembly and front and rear
supports
e) Check and adjust the correct alignment conditions between driver and
driven units.
f) Respecting the minimum safety axial clearance between rotor and
stator.
GAS TURBINE:
Minor & Major Inspection Tasks:
Assembly, disassembly, check and adjust the installation and
functioning clearances, evaluate the wear, damage state of
a) IGV blades, IGV linkage, internal casings, Rotor blades, Stator
blades, fuel nozzle, IGV actuator.
b) Thrust bearings and Journal bearings, lobes and tilting pads types,
with direct or pressurized lubrication systems.
c) Bore scope inspection, Water wash procedure, combustion inspection &
hot gas path inspection
d) Emergency stop valves, Regulation valves assembly and front and rear
supports
e) Check and adjust the correct alignment conditions between driver and
driven units.
f) Respecting the minimum safety axial clearance between rotor and
stator.
STATIC EQUIPMENTS:
Maintenance jobs carried out in Heat exchangers of Fixed, Floating and
U tube type which include activities right from blinding, bundle
pulling, cleaning, testing, repair works as per inspection etc.
Maintenance jobs carried out in Fin fan Air coolers which include
activities like blinding, Plugs removal tubes ID cleaning, Hydro
testing activities etc.
Maintenance jobs carried out in replacing existing tower internals as
per requirement.
Maintenance jobs carried out in Towers which include activities like
removal of trays, Demisters, Packing, trays cleaning, etc.,
a) Maintenance jobs carried out in absorber & vessels which include
activities like cleaning, catalyst renewal, Demister removal etc.,
b) Maintenance jobs carried out in filters which include activities
changing of elements, cleaning, inspection clearance etc.,
Checking of field measurements for scaffolding.
DIESEL ENGINE:
I handled PM Activities & Filter Replacement
Vender Under Major overhauling high power generation engines and cylinder
inspection, piston rings inspection, big and small end bearing inspection
and Valve sheet lapping.
VALVES:
Servicing and testing valves like gate valves, globe valves, angle valves,
ball valves, types of check valves, diaphragm valves & butterfly valves,
Xmas Tree. Well Head Maintenance & PM Activities.
Personal Profile:
Name : S.SIVA
Father Name : S.Sudalaiyandi
Date of Birth : 03-02-1983
Gender : Male
Nationality : Indian
Language Known : English, Hindi, Tamil, Malayalam
Passport Details:
Passport No : M4503036
Date of Issue : 12/12/2014
Valid up to : 11/12/2024
Passport Status : ECNR
Place of Issue : MADURAI
Declaration:
I here by declare that the information stated above is true to the best
of my
knowledge and belief.
(S. SIVA)