Machine Operator Maintenance
Resume:
****Daniel Johnson
*********@*****.***
***** ******** ** #*** ********, MN 55446
OBJECTIVE], shipping, packing, and receiving.
I have two years’ experience in brake press
operator and: I'm looking for a full time
position for warehousing position or machine
operator [punch brake more than ten years in
warehouse. Certified forklift operator as well.
I am dependable and flexible in my work.
Skills: Reading blueprints and measurements
on rulers, calipers. I am experienced in the
set- up and operating of brake press machine:
Amanda, Cincinnati, Strippit, Vikings and
Amanda King and Queen.
Fabrication engineer: August 2013-Januaary
2014
Americlade: Rogers, MN.
Worked in the sheet metal fabrication
•
department and reported to the Group
Leader.
Operated brake and CNC punch press
•
machines.
• Utilized precision measuring tools to
ensure products meet specifications.
• Read blueprints.
• Edited CNC programs to ensure optimal
quality and quantity production.
• Ensured correctness of all incoming
material to be fabricated.
• Modified machine adjustments and CNC
programming.
Machine operator: January 2013-May 2013
Aerotek temporary services: Arden Hills,
MN.
Set up machinery and ensured all
•
production materials are available.
Operated and monitored equipment and
•
replenished materials as needed.
Operated a variety of production machine
•
tools.
Performed routine setups with tolerances
•
that are easily acquired and maintained.
Responsible for setting up & operating
•
machinery & material handling equipment
in a manufacturing environment
Maintained a clean and organize work area
•
Forklift driver: July 2012-Jauary 2013
Ranstad Temp services/Kurt manufacture:
Bloomington MN
Unload inbound shipments
•
Move products to storage locations
•
Stack and store merchandise in
•
appropriate places
Prepare and stage skids for outbound
•
shipments
Assist with picking and packing
•
Assist with pallet building
•
Perform maintenance and preventive
•
maintenance functions on forklifts
Industrial Maintenance Mechanic: January
2012- June 2012
Kelly’s Temp. Services/ST food’s: Plymouth,
MN.
Ensures operation of machinery and
•
mechanical equipment by completing
preventive maintenance requirements on
engines, motors, pneumatic tools,
conveyor systems, and production
machines; following diagrams, sketches,
operations manuals, manufacturer's
instructions, and engineering
specifications; troubleshooting
malfunctions.
Locates sources of problems by
•
observing mechanical devices in
operation; listening for problems; using
precision measuring and testing
instruments.
Removes defective parts by dismantling
•
devices; using hoists, cranes, and hand
and power tools; examining form and
texture of parts.
Determines changes in dimensional
•
requirements of parts by inspecting used
parts; using rules, calipers, micrometers,
and other measuring instruments.
Adjusts functional parts of devices and
•
control instruments by using hand tools,
levels, plumb bobs, and straightedges
Brake press/Machine Operator: June 2010-
October 2011
Kwik Files: Fridley, MN.
Measure completed work pieces to verify
•
conformance to specifications, using
micrometers, gauges, calipers, templates,
or rulers.
Examine completed work pieces for
•
defects, such as chipped edges or marred
surfaces and sort defective pieces
according to types of flaws.
Read work orders or production schedules
•
to determine specifications, such as
materials to be used, locations of cutting
lines, or dimensions and tolerances.
Load work pieces, plastic material, or
•
chemical solutions into machines.
Set up, operate, or tend machines to saw,
•
cut, shear, slit, punch, crimp, notch, bend,
or straighten metal or plastic material.
Start machines, monitor their operations,
•
and record operational data.
Test and adjust machine speeds or actions,
•
according to product specifications, using
gauges and hand tools.
Install, align, and lock specified punches,
•
dies, cutting blades, or other fixtures in
rams or beds of machines, using gauges,
templates, feelers, shims, and hand tools.
Amanda air brake, King and Queen
•
Amanda, punch press, stripping press,
also Vikings manual press brake, with the
Cincinnati manual brake press, I was to
set and run these brake press
Warehouse: December 2005- January 2007
WWW Grainger: Plymouth, MN.
Count stock items, and record data
•
manually or using computer.
Pack and unpack items to be stocked on
•
shelves in stockrooms, warehouses, or
storage yards.
Verify inventory computations by
•
comparing them to physical counts of
stock, and investigate discrepancies or
adjust errors.
Store items in an orderly and accessible
•
manner in warehouses, tool rooms,
supply rooms, or other areas.
Mark stock items using identification
•
tags, stamps, electric marking tools, or
other labeling equipment.
Clean and maintain supplies, tools,
•
equipment, and storage areas in order to
ensure compliance with safety
regulations.
Determine proper storage methods,
•
identification, and stock location based
on turnover, environmental factors, and
physical capabilities of facilities.
Keep records on the use and/or damage
•
of stock or stock handling equipment.
Examine and inspect stock items for
•
wear or defects, reporting any damage
to supervisors.
Provide assistance or direction to other
•
stockroom, warehouse, or storage yard
workers
Warehouse: May 2003- November 2005
SUPERVALU: Hopkins, MN
Stacked cases on pallets
•
Manually selected case product for
•
store orders on palettes and arranged
for shipment
Operated motorized pallet jack
•
Maintained sanitation of warehouse
•
Transported pallets on motorized pallet
•
jacks throughout our refrigerated
warehouse
Leveled and stabilized palletized
•
merchandise
Wrapped and labeled pallets
•
Selected cases from pick slots
•
• EDUCATION
Major: auto mechanic technician
Minor: none
Hennepin Technical College, MN U.S.A
GPA: 3.0
Date Completed: 12/2010
Courses: English, math, computer skills
:
*********@*****.***
15720 Rockford Rd #324 Plymouth, MN 55446
OBJECTIVE], shipping, packing, and receiving.
I have two years’ experience in brake press
operator and: I'm looking for a full time
position for warehousing position or machine
operator [punch brake more than ten years in
warehouse. Certified forklift operator as well.
I am dependable and flexible in my work.
Skills: Reading blueprints and measurements
on rulers, calipers. I am experienced in the
set- up and operating of brake press machine:
Amanda, Cincinnati, Strippit, Vikings and
Amanda King and Queen.
Fabrication engineer: August 2013-Januaary
2014
Americlade: Rogers, MN.
Worked in the sheet metal fabrication
•
department and reported to the Group
Leader.
Operated brake and CNC punch press
•
machines.
Utilized precision measuring tools to
•
ensure products meet specifications.
Read blueprints.
•
Edited CNC programs to ensure optimal
•
quality and quantity production.
Ensured correctness of all incoming
•
material to be fabricated.
Modified machine adjustments and CNC
•
programming.
Machine operator: January 2013-May 2013
Aerotek temporary services: Arden Hills,
MN.
Set up machinery and ensured all
•
production materials are available.
Operated and monitored equipment and
•
replenished materials as needed.
Operated a variety of production machine
•
tools.
Performed routine setups with tolerances
•
that are easily acquired and maintained.
Responsible for setting up & operating
•
machinery & material handling equipment
in a manufacturing environment
Maintained a clean and organize work area
•
Forklift driver: July 2012-Jauary 2013
Ranstad Temp services/Kurt manufacture:
Bloomington MN
Unload inbound shipments
•
Move products to storage locations
•
Stack and store merchandise in
•
appropriate places
Prepare and stage skids for outbound
•
shipments
Assist with picking and packing
•
Assist with pallet building
•
Perform maintenance and preventive
•
maintenance functions on forklifts
Industrial Maintenance Mechanic: January
2012- June 2012
Kelly’s Temp. Services/ST food’s: Plymouth,
MN.
Ensures operation of machinery and
•
mechanical equipment by completing
preventive maintenance requirements on
engines, motors, pneumatic tools,
conveyor systems, and production
machines; following diagrams, sketches,
operations manuals, manufacturer's
instructions, and engineering
specifications; troubleshooting
malfunctions.
Locates sources of problems by
•
observing mechanical devices in
operation; listening for problems; using
precision measuring and testing
instruments.
Removes defective parts by dismantling
•
devices; using hoists, cranes, and hand
and power tools; examining form and
texture of parts.
Determines changes in dimensional
•
requirements of parts by inspecting used
parts; using rules, calipers, micrometers,
and other measuring instruments.
Adjusts functional parts of devices and
•
control instruments by using hand tools,
levels, plumb bobs, and straightedges
Brake press/Machine Operator: June 2010-
October 2011
Kwik Files: Fridley, MN.
Measure completed work pieces to verify
•
conformance to specifications, using
micrometers, gauges, calipers, templates,
or rulers.
Examine completed work pieces for
•
defects, such as chipped edges or marred
surfaces and sort defective pieces
according to types of flaws.
Read work orders or production schedules
•
to determine specifications, such as
materials to be used, locations of cutting
lines, or dimensions and tolerances.
Load work pieces, plastic material, or
•
chemical solutions into machines.
Set up, operate, or tend machines to saw,
•
cut, shear, slit, punch, crimp, notch, bend,
or straighten metal or plastic material.
Start machines, monitor their operations,
•
and record operational data.
Test and adjust machine speeds or actions,
•
according to product specifications, using
gauges and hand tools.
Install, align, and lock specified punches,
•
dies, cutting blades, or other fixtures in
rams or beds of machines, using gauges,
templates, feelers, shims, and hand tools.
Amanda air brake, King and Queen
•
Amanda, punch press, stripping press,
also Vikings manual press brake, with the
Cincinnati manual brake press, I was to
set and run these brake press
Warehouse: December 2005- January 2007
WWW Grainger: Plymouth, MN.
Count stock items, and record data
•
manually or using computer.
Pack and unpack items to be stocked on
•
shelves in stockrooms, warehouses, or
storage yards.
Verify inventory computations by
•
comparing them to physical counts of
stock, and investigate discrepancies or
adjust errors.
Store items in an orderly and accessible
•
manner in warehouses, tool rooms,
supply rooms, or other areas.
Mark stock items using identification
•
tags, stamps, electric marking tools, or
other labeling equipment.
Clean and maintain supplies, tools,
•
equipment, and storage areas in order to
ensure compliance with safety
regulations.
Determine proper storage methods,
•
identification, and stock location based
on turnover, environmental factors, and
physical capabilities of facilities.
Keep records on the use and/or damage
•
of stock or stock handling equipment.
Examine and inspect stock items for
•
wear or defects, reporting any damage
to supervisors.
Provide assistance or direction to other
•
stockroom, warehouse, or storage yard
workers
Warehouse: May 2003- November 2005
SUPERVALU: Hopkins, MN
Stacked cases on pallets
•
Manually selected case product for
•
store orders on palettes and arranged
for shipment
Operated motorized pallet jack
•
Maintained sanitation of warehouse
•
Transported pallets on motorized pallet
•
jacks throughout our refrigerated
warehouse
Leveled and stabilized palletized
•
merchandise
Wrapped and labeled pallets
•
Selected cases from pick slots
•
• EDUCATION
Major: auto mechanic technician
Minor: none
Hennepin Technical College, MN U.S.A
GPA: 3.0
Date Completed: 12/2010
Courses: English, math, computer skills
:
*********@*****.***
15720 Rockford Rd #324 Plymouth, MN 55446
OBJECTIVE], shipping, packing, and receiving.
I have two years’ experience in brake press
operator and: I'm looking for a full time
position for warehousing position or machine
operator [punch brake more than ten years in
warehouse. Certified forklift operator as well.
I am dependable and flexible in my work.
Skills: Reading blueprints and measurements
on rulers, calipers. I am experienced in the
set- up and operating of brake press machine:
Amanda, Cincinnati, Strippit, Vikings and
Amanda King and Queen.
Fabrication engineer: August 2013-Januaary
2014
Americlade: Rogers, MN.
Worked in the sheet metal fabrication
•
department and reported to the Group
Leader.
• Operated brake and CNC punch press
machines.
• Utilized precision measuring tools to
ensure products meet specifications.
• Read blueprints.
• Edited CNC programs to ensure optimal
quality and quantity production.
• Ensured correctness of all incoming
material to be fabricated.
• Modified machine adjustments and CNC
programming.
Machine operator: January 2013-May 2013
Aerotek temporary services: Arden Hills,
MN.
Set up machinery and ensured all
•
production materials are available.
Operated and monitored equipment and
•
replenished materials as needed.
Operated a variety of production machine
•
tools.
Performed routine setups with tolerances
•
that are easily acquired and maintained.
Responsible for setting up & operating
•
machinery & material handling equipment
in a manufacturing environment
Maintained a clean and organize work area
•
Forklift driver: July 2012-Jauary 2013
Ranstad Temp services/Kurt manufacture:
Bloomington MN
Unload inbound shipments
•
Move products to storage locations
•
Stack and store merchandise in
•
appropriate places
Prepare and stage skids for outbound
•
shipments
Assist with picking and packing
•
Assist with pallet building
•
Perform maintenance and preventive
•
maintenance functions on forklifts
Industrial Maintenance Mechanic: January
2012- June 2012
Kelly’s Temp. Services/ST food’s: Plymouth,
MN.
Ensures operation of machinery and
•
mechanical equipment by completing
preventive maintenance requirements on
engines, motors, pneumatic tools,
conveyor systems, and production
machines; following diagrams, sketches,
operations manuals, manufacturer's
instructions, and engineering
specifications; troubleshooting
malfunctions.
Locates sources of problems by
•
observing mechanical devices in
operation; listening for problems; using
precision measuring and testing
instruments.
Removes defective parts by dismantling
•
devices; using hoists, cranes, and hand
and power tools; examining form and
texture of parts.
Determines changes in dimensional
•
requirements of parts by inspecting used
parts; using rules, calipers, micrometers,
and other measuring instruments.
Adjusts functional parts of devices and
•
control instruments by using hand tools,
levels, plumb bobs, and straightedges
Brake press/Machine Operator: June 2010-
October 2011
Kwik Files: Fridley, MN.
Measure completed work pieces to verify
•
conformance to specifications, using
micrometers, gauges, calipers, templates,
or rulers.
Examine completed work pieces for
•
defects, such as chipped edges or marred
surfaces and sort defective pieces
according to types of flaws.
Read work orders or production schedules
•
to determine specifications, such as
materials to be used, locations of cutting
lines, or dimensions and tolerances.
Load work pieces, plastic material, or
•
chemical solutions into machines.
Set up, operate, or tend machines to saw,
•
cut, shear, slit, punch, crimp, notch, bend,
or straighten metal or plastic material.
Start machines, monitor their operations,
•
and record operational data.
Test and adjust machine speeds or actions,
•
according to product specifications, using
gauges and hand tools.
Install, align, and lock specified punches,
•
dies, cutting blades, or other fixtures in
rams or beds of machines, using gauges,
templates, feelers, shims, and hand tools.
Amanda air brake, King and Queen
•
Amanda, punch press, stripping press,
also Vikings manual press brake, with the
Cincinnati manual brake press, I was to
set and run these brake press
Warehouse: December 2005- January 2007
WWW Grainger: Plymouth, MN.
Count stock items, and record data
•
manually or using computer.
Pack and unpack items to be stocked on
•
shelves in stockrooms, warehouses, or
storage yards.
Verify inventory computations by
•
comparing them to physical counts of
stock, and investigate discrepancies or
adjust errors.
Store items in an orderly and accessible
•
manner in warehouses, tool rooms,
supply rooms, or other areas.
Mark stock items using identification
•
tags, stamps, electric marking tools, or
other labeling equipment.
Clean and maintain supplies, tools,
•
equipment, and storage areas in order to
ensure compliance with safety
regulations.
Determine proper storage methods,
•
identification, and stock location based
on turnover, environmental factors, and
physical capabilities of facilities.
Keep records on the use and/or damage
•
of stock or stock handling equipment.
Examine and inspect stock items for
•
wear or defects, reporting any damage
to supervisors.
Provide assistance or direction to other
•
stockroom, warehouse, or storage yard
workers
Warehouse: May 2003- November 2005
SUPERVALU: Hopkins, MN
Stacked cases on pallets
•
Manually selected case product for
•
store orders on palettes and arranged
for shipment
Operated motorized pallet jack
•
Maintained sanitation of warehouse
•
Transported pallets on motorized pallet
•
jacks throughout our refrigerated
warehouse
Leveled and stabilized palletized
•
merchandise
Wrapped and labeled pallets
•
Selected cases from pick slots
•
• EDUCATION
Major: auto mechanic technician
Minor: none
Hennepin Technical College, MN U.S.A
GPA: 3.0
Date Completed: 12/2010
Courses: English, math, computer skills
:
:
*********@*****.***
15720 Rockford Rd #324 Plymouth, MN 55446
OBJECTIVE], shipping, packing, and receiving. I have two years’ experience in
brake press operator and: I'm looking for a full time position for warehousing
position or machine operator [punch brake more than ten years in
warehouse. Certified forklift operator as well. I am dependable and flexible
in my work.
Skills: Reading blueprints and measurements on rulers, calipers. I am
experienced in the set- up and operating of brake press machine: Amanda,
Cincinnati, Strippit, Vikings and Amanda King and Queen.
Fabrication engineer: August 2013-Januaary 2014
Americlade: Rogers, MN.
• Worked in the sheet metal fabrication department and reported to the
Group Leader.
Operated brake and CNC punch press machines.
•
Utilized precision measuring tools to ensure products meet
•
specifications.
Read blueprints.
•
Edited CNC programs to ensure optimal quality and quantity
•
production.
Ensured correctness of all incoming material to be fabricated.
•
Modified machine adjustments and CNC programming.
•
Machine operator: January 2013-May 2013
Aerotek temporary services: Arden Hills, MN.
• Set up machinery and ensured all production materials are available.
• Operated and monitored equipment and replenished materials as
needed.
• Operated a variety of production machine tools.
• Performed routine setups with tolerances that are easily acquired and
maintained.
• Responsible for setting up & operating machinery & material handling
equipment in a manufacturing environment
• Maintained a clean and organize work area
Forklift driver: July 2012-Jauary 2013
Ranstad Temp services/Kurt manufacture: Bloomington MN
• Unload inbound shipments
• Move products to storage locations
• Stack and store merchandise in appropriate places
• Prepare and stage skids for outbound shipments
• Assist with picking and packing
• Assist with pallet building
• Perform maintenance and preventive maintenance functions on
forklifts
Industrial Maintenance Mechanic: January 2012- June 2012
Kelly’s Temp. Services/ST food’s: Plymouth, MN.
• Ensures operation of machinery and mechanical equipment by
completing preventive maintenance requirements on engines,
motors, pneumatic tools, conveyor systems, and production
machines; following diagrams, sketches, operations manuals,
manufacturer's instructions, and engineering specifications;
troubleshooting malfunctions.
• Locates sources of problems by observing mechanical devices in
operation; listening for problems; using precision measuring and
testing instruments.
• Removes defective parts by dismantling devices; using hoists,
cranes, and hand and power tools; examining form and texture of
parts.
• Determines changes in dimensional requirements of parts by
inspecting used parts; using rules, calipers, micrometers, and other
measuring instruments.
Adjusts functional parts of devices and control instruments by using
•
hand tools, levels, plumb bobs, and straightedges
Brake press/Machine Operator: June 2010-October 2011
Kwik Files: Fridley, MN.
• Measure completed work pieces to verify conformance to
specifications, using micrometers, gauges, calipers, templates, or
rulers.
• Examine completed work pieces for defects, such as chipped edges or
marred surfaces and sort defective pieces according to types of flaws.
• Read work orders or production schedules to determine specifications,
such as materials to be used, locations of cutting lines, or dimensions
and tolerances.
• Load work pieces, plastic material, or chemical solutions into machines.
• Set up, operate, or tend machines to saw, cut, shear, slit, punch, crimp,
notch, bend, or straighten metal or plastic material.
• Start machines, monitor their operations, and record operational data.
• Test and adjust machine speeds or actions, according to product
specifications, using gauges and hand tools.
• Install, align, and lock specified punches, dies, cutting blades, or other
fixtures in rams or beds of machines, using gauges, templates,
feelers, shims, and hand tools.
• Amanda air brake, King and Queen Amanda, punch press, stripping
press, also Vikings manual press brake, with the Cincinnati manual
brake press, I was to set and run these brake press
Warehouse: December 2005- January 2007
WWW Grainger: Plymouth, MN.
Count stock items, and record data manually or using computer.
•
• Pack and unpack items to be stocked on shelves in stockrooms,
warehouses, or storage yards.
• Verify inventory computations by comparing them to physical counts
of stock, and investigate discrepancies or adjust errors.
• Store items in an orderly and accessible manner in warehouses, tool
rooms, supply rooms, or other areas.
• Mark stock items using identification tags, stamps, electric marking
tools, or other labeling equipment.
• Clean and maintain supplies, tools, equipment, and storage areas in
order to ensure compliance with safety regulations.
Determine proper storage methods, identification, and stock
•
location based on turnover, environmental factors, and physical
capabilities of facilities.
Keep records on the use and/or damage of stock or stock handling
•
equipment.
Examine and inspect stock items for wear or defects, reporting any
•
damage to supervisors.
Provide assistance or direction to other stockroom, warehouse, or
•
storage yard workers
Warehouse: May 2003- November 2005
SUPERVALU: Hopkins, MN
• Stacked cases on pallets
Manually selected case product for store orders on palettes and
•
arranged for shipment
• Operated motorized pallet jack
Maintained sanitation of warehouse
•
Transported pallets on motorized pallet jacks throughout our
•
refrigerated warehouse
Leveled and stabilized palletized merchandise
•
Wrapped and labeled pallets
•
Selected cases from pick slots
•
• EDUCATION
Major: auto mechanic technician
Minor: none
Hennepin Technical College, MN U.S.A
GPA: 3.0
Date Completed: 12/2010
Courses: English, math, computer skills
:
*********@*****.***
15720 Rockford Rd #324 Plymouth, MN 55446
OBJECTIVE], shipping, packing, and receiving. I have two years’ experience in
brake press operator and: I'm looking for a full time position for warehousing
position or machine operator [punch brake more than ten years in
warehouse. Certified forklift operator as well. I am dependable and flexible
in my work.
Skills: Reading blueprints and measurements on rulers, calipers. I am
experienced in the set- up and operating of brake press machine: Amanda,
Cincinnati, Strippit, Vikings and Amanda King and Queen.
Fabrication engineer: August 2013-Januaary 2014
Americlade: Rogers, MN.
• Worked in the sheet metal fabrication department and reported to the
Group Leader.
Operated brake and CNC punch press machines.
•
Utilized precision measuring tools to ensure products meet
•
specifications.
Read blueprints.
•
Edited CNC programs to ensure optimal quality and quantity
•
production.
Ensured correctness of all incoming material to be fabricated.
•
Modified machine adjustments and CNC programming.
•
Machine operator: January 2013-May 2013
Aerotek temporary services: Arden Hills, MN.
• Set up machinery and ensured all production materials are available.
• Operated and monitored equipment and replenished materials as
needed.
• Operated a variety of production machine tools.
• Performed routine setups with tolerances that are easily acquired and
maintained.
• Responsible for setting up & operating machinery & material handling
equipment in a manufacturing environment
• Maintained a clean and organize work area
Forklift driver: July 2012-Jauary 2013
Ranstad Temp services/Kurt manufacture: Bloomington MN
• Unload inbound shipments
• Move products to storage locations
• Stack and store merchandise in appropriate places
• Prepare and stage skids for outbound shipments
• Assist with picking and packing
• Assist with pallet building
• Perform maintenance and preventive maintenance functions on
forklifts
Industrial Maintenance Mechanic: January 2012- June 2012
Kelly’s Temp. Services/ST food’s: Plymouth, MN.
• Ensures operation of machinery and mechanical equipment by
completing preventive maintenance requirements on engines,
motors, pneumatic tools, conveyor systems, and production
machines; following diagrams, sketches, operations manuals,
manufacturer's instructions, and engineering specifications;
troubleshooting malfunctions.
• Locates sources of problems by observing mechanical devices in
operation; listening for problems; using precision measuring and
testing instruments.
• Removes defective parts by dismantling devices; using hoists,
cranes, and hand and power tools; examining form and texture of
parts.
• Determines changes in dimensional requirements of parts by
inspecting used parts; using rules, calipers, micrometers, and other
measuring instruments.
Adjusts functional parts of devices and control instruments by using
•
hand tools, levels, plumb bobs, and straightedges
Brake press/Machine Operator: June 2010-October 2011
Kwik Files: Fridley, MN.
• Measure completed work pieces to verify conformance to
specifications, using micrometers, gauges, calipers, templates, or
rulers.
• Examine completed work pieces for defects, such as chipped edges or
marred surfaces and sort defective pieces according to types of flaws.
• Read work orders or production schedules to determine specifications,
such as materials to be used, locations of cutting lines, or dimensions
and tolerances.
• Load work pieces, plastic material, or chemical solutions into machines.
• Set up, operate, or tend machines to saw, cut, shear, slit, punch, crimp,
notch, bend, or straighten metal or plastic material.
• Start machines, monitor their operations, and record operational data.
• Test and adjust machine speeds or actions, according to product
specifications, using gauges and hand tools.
• Install, align, and lock specified punches, dies, cutting blades, or other
fixtures in rams or beds of machines, using gauges, templates,
feelers, shims, and hand tools.
• Amanda air brake, King and Queen Amanda, punch press, stripping
press, also Vikings manual press brake, with the Cincinnati manual
brake press, I was to set and run these brake press
Warehouse: December 2005- January 2007
WWW Grainger: Plymouth, MN.
Count stock items, and record data manually or using computer.
•
• Pack and unpack items to be stocked on shelves in stockrooms,
warehouses, or storage yards.
• Verify inventory computations by comparing them to physical counts
of stock, and investigate discrepancies or adjust errors.
• Store items in an orderly and accessible manner in warehouses, tool
rooms, supply rooms, or other areas.
• Mark stock items using identification tags, stamps, electric marking
tools, or other labeling equipment.
• Clean and maintain supplies, tools, equipment, and storage areas in
order to ensure compliance with safety regulations.
Determine proper storage methods, identification, and stock
•
location based on turnover, environmental factors, and physical
capabilities of facilities.
Keep records on the use and/or damage of stock or stock handling
•
equipment.
Examine and inspect stock items for wear or defects, reporting any
•
damage to supervisors.
Provide assistance or direction to other stockroom, warehouse, or
•
storage yard workers
Warehouse: May 2003- November 2005
SUPERVALU: Hopkins, MN
• Stacked cases on pallets
Manually selected case product for store orders on palettes and
•
arranged for shipment
• Operated motorized pallet jack
Maintained sanitation of warehouse
•
Transported pallets on motorized pallet jacks throughout our
•
refrigerated warehouse
Leveled and stabilized palletized merchandise
•
Wrapped and labeled pallets
•
Selected cases from pick slots
•
• EDUCATION
Major: auto mechanic technician
Minor: none
Hennepin Technical College, MN U.S.A
GPA: 3.0
Date Completed: 12/2010
Courses: English, math, computer skills
:
Contact this candidate