Arabejo A. Lagoy
Address: Blk ** Lot * Molino Homes II Salitran 3 Dasmariñas Cavite City Philippines
Mobile#: +63-948*******(phil)
Mobile#: +63-948*******
Email Address: acp5xr@r.postjobfree.com
Objective:
To, learn and grow along with the organization that values professionalism, employee satisfaction and business ethics, enjoying the challenge that the position my pose, effectively utilizing my skills, abilities and technical knowledge.
Position Applied For:
Crane Operator
Working experience:
Company : Daewoo E & C [ LTD ] CO.
PNG LNG Project Papua New Guinea
Inclusive Dates: December 17, 2011 to December 16,2013
Position : CRAWLER CRANES OPERATOR
Crane Handled: Crawler Crane Kobelco (cke 2500-2)
Duties and Responsibilities:
Operates mobile cranes to lift, move and position loads, such as machinery, equipment (Reboiler, pump, vessel, exchanger, HVAC assembly), Structural assemblies,pipe,valve and solid or bulk materials, using hoisting attachments, such as hook, sling and rigging tackles.
Conduct regular inspection, pre-Use Checklists and maintenance to ensure that all components of the lifting devices are in good condition and report any defects immediately to the supervisor in charge.
Read and interpret documents such as safety rules.,Lifting/Rigging Packages,operating and maintenance instruction and procedures manuals
Manipulates or depresses crane controls, such as pedals, levers, and buttons, to regulate speed and direction of crane and hoist movement according to written, verbal, or signal instructions.
Drives machine to work site.
Directs riggers engaged in placing blocks, matting plates and outriggers to prevent tipping of machine when lifting heavy loads.
Adapts to changes in the work environment; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events.
Follows instructions responds to management direction; Commits to long hours of work when necessary to reach goals.
Ability to add, subtracts, multiply, and divides in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent.
Capable of operating, assembly and disassembly of the following cranes.
oKobelco (CKE 2500-2, CKE 1350) w/ or w/o luffing jib
oKobelco (7250)
oHitachi sumitomo (scx 2500-2) w/ or w/o fly jib
oLiebherr (LTM 1090,LTM 1070) w/ or w/o fly jib
oGrove (GMK 4080, GMK 3055) w/ or w/o fly jib
oGrove (RT880E, RT760) w/ or w/o fly jib
Have sufficient knowledge of the working crane and understand fully the duties of the
Slingers/banks men and be familiar with the signaling.
Carry out a daily pre-use check of the crane before starting work
Company: Techno-Stress Systems Corporation( Philippines)
Inclusive Dates: September 03, 2011 to November 23, 2011
Position :PILE DRIVING CRANE OPERATOR
Crane Handled: CRAWLER CRANE FMC LINK BELT MECHANICAL CRANE
Duties and Responsibilities:
•Operates mobile cranes to lift, move, and position loads
• Operate mobile cranes for pile driving operation
• Conduct regular inspection, pre-Use Checklists and maintenance to ensure that all components of the lifting devices are in good condition and report any defects immediately to the supervisor in charge.
•Ensure Good Housekeeping within Crane Cabin and machinery
•Observes load hookup and determines safety of Load, Observes safety and security procedures; Reports potentially unsafe conditions
•Manipulates or depresses crane controls, such as pedals, levers, and buttons, to regulate speed and direction of crane and hoist movement according to written, verbal, or signal instructions.
•Have sufficient knowledge of the working crane and understand fully the duties of the Slingers/banks men and be familiar with the signaling.
•Carry out a daily pre-use check of the crane before starting work
•Capable of operating, assembly and disassembly of the following Mechanical cranes.
oFMC 500 link belt Mechanical crane
oFMC 350 link belt Mechanical crane
Company: Hyundai Engineering and Construction Co.LTD.( Kingdom of Saudi Arabia)
Inclusive Dates: August 22, 2010 to June 18, 2011
Position : CRAWLER CRANES OPERATOR
Crane Handled: CRAWLER CRANE HITACHI SUMITOMO(SCX2500-2)
Duties and Responsibilities:
Carry out a daily pre-use check of the crane before starting work
•Erection of pipe, valve, steel structure, Loading and unloading
•Conduct regular inspection, pre-Use Checklists and maintenance to ensure that all components of the lifting devices are in good condition and report any defects immediately to the supervisor in charge.
•Observes load hookup and determines safety of load, Observes safety and security procedures; Reports potentially unsafe conditions
•Directs riggers engaged in placing blocks, matting plates and outriggers to prevent tipping of machine when lifting heavy loads.
Ensure Good Housekeeping within Crane Cabin and machinery
Capable of operating, assembly and disassembly of the following cranes.
oHitachi Sumitomo (SCX 2500-2)
oKobelco (CKE 2500-2)
oTerex American (CC110)
oLiebherr (LTM 1120)
oTadano (GR700EX, GR5500EX)
oKato (KR500)
Company AL-osais Hiring Division CO( Kingdom of Saudi Arabia)
Project: Oil and Gas Refinery
Inclusive Dates: April 12,2008 to May 7, 2010
Position : CRANE OPERATOR
Crane Handled: CRAWLER CRANE KOBELCO 550 TONS (SL 6000)
Duties and Responsibilities:
Load out 42” pipe and gravity on tanajib port off shore pipeline (Saudi Aramco pro.)
Operates mobile cranes to lift, move, and position loads, such as machinery, equipment (Reboiler, pump, vessel, exchanger, HVAC assembly),valve,pipe, structural assemblies, and solid or bulk materials, using hoisting attachments, such as hook, sling and rigging tackles,
Tailing crane for erection of vessels in Tandem with Alatas Big Lift cranes
Observes load hookup and determines safety of load, Observes safety and security procedures; Reports potentially unsafe conditions
Manipulates or depresses crane controls, such as pedals, levers, and buttons, to regulate speed and direction of crane and hoist movement according to written, verbal, or signal instructions.
Completing all checklist before operation
Ensure Good Housekeeping within Crane Cabin and machinery
Vendor conducted crane operators training (SL6000, LTM125O,AC25OO)
Capable of operating, assembly and disassembly of the following cranes.
oKobelco (SL-6000) 550 Tons w/ or w/o Luffing jib
oKobelco (CKE2500-2)
oHitachi Sumitomo (SCX 1500, SCX 1200-2)
oLiebherr (LTM 1400, LTM1250, LTM 1100)
oGrove (GMK 6220, GMK 5100)
oTerex Demag (AC250-1, AC100-1, AC50-1)
oTerex Bindini (AC60)
oGrove (RT890E, RT760)
oTadano (GR700 EX, GR500 EX)
oTadano (TG 500EX, TG700EX, TG500EX)
Company: Jap Construction & Development Corporation (Philippines)
(project) :OFFSHORE/ONSHORE PILE DRIVING AND SHEET PILING WORKS
Inclusive Dates: June 2003 to March 30 2008
Position :CRANE OPERATOR
Crane Handled: mechanical Crawler crane Hitachi KH180
Duties and Responsibilities:
•Pile Driving, Bore pile pre-stressed girder, erection, sheet piling, bridge Detour, CLAMSHEL
•Conduct regular inspection, pre-Use Checklists and maintenance to ensure that all components of the L ifting devices are in good condition.
•Lifting prestressed concrete
•Pile driving of concrete pile, sheet pile at offshore using vibro hammer
•Have sufficient knowledge of the working crane and understand fully the duties of the Slingers/banks men and be familiar with the signaling.
•Capable of operating, assembly and disassembly of the following Mechanical cranes
oNipon Sharyo (DH500)
oLINK Belt (FMC500)
oHitachi (KH180)
oIHI (CC50)
oSamsung (CC50)
oLoren (TM150)
oTadano (TG500EX)
oKato (KR80)
Crane Certificate:
Aramco Certificate No: DH B 00178:
KOBELCO SL-6000 CRAWLER 550 TONS
GROVE GMK 6220, 5100. 3050, 4070
HITACHI SUMITOMO CRAWLER SCX-1200, 900,500
Australian Crane Services Pty Ltd:
KOBELCO CKE2500_2
KOBELCO 7250
HITACHI SUMITOMO SCX2500_2
CERTIFICATES AND ID COPIES AS ATTACHED
OTHER QUALIFICATIONS:
• Demonstrates good interpersonal and organizational relations
• Self-starter who earns quickly and result-oriented individual
• Honest, flexible
• Self Motivated
• Work on own initiative
• Clear and effective communication both written and oral
• Decisive during Lifting operations
PERSONAL DETAILS:
DATE OF BIRTH: January 20, 1985
PLACE OF BIRTH: Ampawid Laak San Vicente
RELIGION: Roman Catholic
HEIGHT: 163cm
WEIGHT: 68kg
CIVIL STATUS: Married
SEX: Male
Nationality: Filipino
LANGUAGE: English, Tagalog
EDUCATIONAL BACKGROUND
SECONDARY: Laak NatonaI High School
YEARS: 1997-2001
ELEMENTARY; Ampawd. Elem. School
YEARS: 1991-1997