Field Service Electrical
Resume:
Michael R.R. Smith
South Lyon, MI 48178
***********@*****.***
OBJECTIVE:
Using the skills from previous work experience and training in FLUID POWER
TECHNOLOGY, ELECTRICAL MAINTENANCE TECHNICIAN, and DIVERSIFIED
WELDING at Spokane Community College for a career in Electrical, Hydraulic,
Mechanical, Maintenance Engineer, eventually move into Management position.
EDUCATION:
Spokane Community College, AAS, in Electrical Maintenance Tech. 1998
Spokane Community College, AAS, in Fluid Power Technology, 1984
Certificate in Diversified Welding
Certificate Blue Ribbon Limitorque, 2007
U.S. ARMY:
Medic (91B) (July 1975 - July 1979)
Drill Instructor USAR (11BX) Clearance Secret (July 1979 - July 1989)
SKILLS:
Knowledge and experience in Electrical, Hydraulic, Pneumatic and Mechanical.
Industrial Machine builder. Troubleshooting and Repairing CNC Machines. Install and
operated Actuators on Valves (MOV) (Limitorque, Bettis, and Rotork). Understand
Hydraulic and Pneumatic theory, Blue print reading, Drawing fundamentals, Fluid line
sizing calculation, Advanced machine controls, Advanced Hydraulics Systems, Hydraulic
Power Unit Fabrication, Fluid line layout and assembly, Hydraulic component testing,
repair and Quality Control, Proportional and Servo valves. Knowledge in operating a
Hydraulic Test Stand. Assembling special valves and manifolds. Knowledge in using
special O rings (Buna-N, Viton, and EPR). Understand Electrical theory, AC/DC, motor
control, transformers, special circuits, calibration, motor maintenance, solid-state motor
control, PLC, Electrical drawings and reading, electrical layout and assembly, raceways.
Knowledge in using DMM (Fluke 744) Voltage, current, ohms, and calibration functions.
ARC welding, Oxy-acetylene welding. Hand and Shop tools. Knowledge in operating a
Dead weight tester. Instrumentation calibration pressure gauges, flow meters, thermo and
torque transducer. Have computer skills, excellent communication skills. Field Service
(Domestic and International travel) Install, start up, troubleshooting machine systems.
Have a good driving record, 40+ year’s dependable and responsible experience.
Industries I worked in: Steel Foundry, Aerospace, Industrial, Wood Industry, Bakery, Oil
Refineries, Oil Drilling, Agricultural, and Nuclear.
EMPLOYMENT EXPERIENCE
Oct. 2012-May 2015: Field Service Engineer
Testek Inc. 28320 Lakeview Dr. Wixom, Michigan 48393
Singular performs testing On AAI/ACL PDQ flow meter “as found”, repair and or
adjustment to calibration of performance, and then ran a final test on PDQ Flow meter
“As left”. Performed prestart up checking the paper work (work orders). Drawings and
BOM Checking on all electrical continuity before hooking up voltage. Preparing the
Power Units with Hyd. oil, and calibrating the Hydraulic, Pneumatic and Electrical
components. Working with pressures up to 30,000 PSI. Hooking up 24 volts DC up to
220 / 480voltsAC 50 Hz or 60 Hz. Start-up and run ATP testing. Checking over the
whole Test Stand for top performance. Worked on special projects, Valve and manifold
assemblies. Worked on sales and job proposals. Domestic and International work.
July 2012-Oct. 2012:
Farmer, I was farming using (3) Commercial Greenhouse on my property. Fixing and
preparing Greenhouses for maximum use.
Nov. 2010-June 2012: Field Service 509-***-****
Machine Tool Services Inc. 14103 W. Coulee Hite Rd. Spokane, WA 99224
Trouble shooting, Fixing and Repair all the parts on a CNC machine.
Field Service in USA (Mechanical, Hydraulic, Air, Electrical, Electronic, and
programming).
June 2010-Nov.2010: Millwright 509-***-****
Spokane Industries 3808 N. Sullivan Rd. Blg. #1 Spokane Valley, Washington 99216
Trouble shooting, Fixing and Repair all the equipment in the foundries. Favored repairing
and troubleshooting Hydraulic system and components. Electrical trouble shooting and
repairs. Special safety equipment (PPE).
Aug. 2009-June 2010: Field Service Tech. 206-***-****
Bay Valve 4385 S. 133rd St. Seattle, WA 98168
Testing, Trouble shooting, and Repairing. Limitorque (SMB, L120, MX, and B320).
Working in a Shop or Field Service. Writing reports. Traveling to customer location
(Washington, California, Colorado and Montana).
Nov.2006- July 2009: Field Service Tech. 877-***-****
Caltrol Inc. 6851 Walthall Way Paramount CA 90723
Working at Oil refineries (Chevron, BP, & Exxon), Water treatment plants, and
Wastewater treatment plants. Performing Multi-tasks in Hydraulic, Pneumatic, Electrical
and Mechanical. Install, Start up, Testing, Programming, and Trouble shooting
Limitorque products (L120, MX, B320, HBC, and Master Station), Bettis Actuators,
Field-Q, Torque Master, and Auma Actuators. Wearing special protective clothing.
Writing reports, commutations with computers and cell phones. Managing the Projects at
the plants location. Blue Ribbon certified at Lynchburg, VA
July 2005-Nov. 2006: Field Project Manager 714-***-****
Enertech 2950 Birch Street Brea, CA 92821
Worked at Nuclear plants following work orders and procedures. Performing multi-task
in Hydraulic, Pneumatic, Electrical and Mechanical. Utilizing optimum time and
placement inside the contaminate area. Wearing special protective clothing. Writing
reports, commutations with computers and cell phones. Managing a group of people at
the plants location.
Aug 2004-July 2005:
College Student/ Electronic Engineer (1 year)
Spokane Community College, Spokane, WA
March 2004-Aug2004:
Sub-contractor, Carpenter
Self employed in Spokane, WA
Aug.2003 – Feb. 2004: Millwright 509-***-****
Hy Mark Wood Products Spangle Waverly Rd., Spangle, WA 99031
Maintaining production for maximum operation. Utilizing appropriate tools for optimum
machine performance. Trouble shooting Electrical and Power Transmission problems.
Provide preventative maintenance. Worked on production line.
June 1998 - Feb. 2003: Test/Field Service Engineer 714-***-****
AAI/ACL Technologies 3200 Enterprise Street Brea, CA 92821
Aerospace company: Singular performs Pre-test on all Test Stands. Checking the paper
work (work orders). Drawings and BOM Checking on all electrical continuity before
hooking up voltage. Preparing the Power Units with Hyd. oil, and calibrating the
Hydraulic, Pneumatic and Electrical components. Working with pressures up to 30,000
PSI. Hooking up 24 volts DC up to 220 / 480voltsAC 50 Hz or 60 Hz. Start-up and run
ATP testing. Checking over the whole Test Stand for top performance. International work
related travel to: Asia, England, and Greece, etc. Installed, started-up, and trained the
customer on how to operate the Test Stands.
September 1996 - June 1998, College Student, Spokane, WA.
Spokane Community College, (Electrical maintenance and controls Tech). AAS
July 1993 - July 1997: Hydraulic Millwright/ Fabricator 509-***-****
Plum Creek Remanufacture 3803 N. Sullivan Rd. #27 Spokane, WA 99216
Singular Maintenance Millwright Fabricator on Swing shift. Designed and installed
specialized custom systems and fluid power system for production line. Monitored
production efficiency of equipment for optiraum output. Price checked and ordered parts
for maintenance and production equipment. Made Independent decisions and executed
direction needed to immediately and expeditiously insure continuous production in case
of discontinuity of product flow regardless of time of day or obstacles. Operated
whatever was needed: Welder, Drill press, Man lifts and variety of shop tools used in
maintenance and fabrication of needed production equipment at bench or where required.
Jan. 1993 - July 1993: Millwright 509-***-****
Inland Wood Spec. 3803 N. Sullivan Rd. #18 Spokane, WA 99216
Paramount responsibly: To keep production in full operation. Utilized a wide variety of
tools needed to expedite Continuous product flow in sawmill. Sawmill equipment
includes wide conveyor belts, bearings of many types such as Pillow block, Babbitt
bearings, Timken tapered bearings, etc. Hydraulic, Pneumatic, Electrical, Power
Transmission. Trouble shooting, preventative maintenance; fabricate new equipment,
blue print reading, and innovating when needed.
Mar. 1992 - Jan. 1993: Millwright 208-***-****
Industrial Personnel Inc. 1119 Ironwood Parkway #10 Coeur d'Alene, ID 83814
Mobile duties over various locations that were many times in very isolated remote areas
Northern Idaho and Western Montana. Preformed welding, fabricating, and innovating on
industrial and/or production equipment. I worked with a diversity of tools such as heavy
duty Hyster fork lift, boom cranes, heavy hand tools, jack hammer, etc. Carpentry skills:
cement, scaffolding, etc. Worked independently.
Mar. 1985 - Mar. 1992: Fluid power Tech. / Indust. Mechanic 509-***-****
ASC Machine Tools Inc. N. 900 Fancher Spokane, WA 99210
Customized production of large industrial equipment. Interpreting blue prints which
involved assembling and sub-assembling the units by use of mechanical, hydraulic,
pneumatic, parts, gears, bearings, power transmissions, and resulting in the start-up of the
machine(s). Welded and Customized parts for precision fit. Used overhead five-ton crane,
brake presses, shears, and rolling mill. Precision was the watchword. Deburr and paint
booth. Traveled the U.S. in the Field service to trouble shoot and install massive
equipment.
Jan. 1985 - Mar. 1985: Hydraulic Technician 509-***-****
Kilkom Inc. Spokane Industrial Park #13 Spokane, WA 99216
Customized the assemblage of large commercial units by utilizing blue prints, (examples
are: garbage compactors, paper balers, etc). Components included hydraulic, electrical,
power units, high-pressure hoses and tubing. Welded and used a wide variety of hand
tools, which customized fitting of all parts for rough usage. I provided quality trouble
shooting with select equipment to expedite what was needed.
May 1984 - Dec. 1984: Fluid Power Technician 503-***-****
Spencer Fluid Power 665 Conger Suite "P" Eugene, OR 97402
Direct customer service in sales and repair within the shop and in the field. Worked
primarily on and with hydraulic equipment by repairing, conversion, or replacing all
hydraulic components. Built Hydraulic power units. Worked in the field service,
computers in the office, design, stock, packaged for shipping, worked independently in
the store with receptionist, and was responsible for its operation completely. Opened and
closed the Fluid power store each day.
6-2015
Contact this candidate