Project Engineer
Resume:
S.NATARAJAN B.E (EEE)
EMAIL: *************@*****.***
MOBILE: +91-984*******
Career objective:
To become a reputed professional, who constantly upgrades knowledge and
applies skills to serve the organization, helping it to achieve its
goals, so as to have a very successful and distinguished career.
Career Highlights:
Syngene International Ltd, Bangalore
Project Engineer Instrumentation and Automation - June '08 to Till
Date
Bimetal Bearings Ltd (Amalgamation group)
Project Engineer - June 2006 to May 2008
Sasta Electricals, Bangalore
Trainee engineer - June 2005 to May 2006
Technical Skills
PLC Products : Allen Bradley(Rslogix, Contro logix), Siemens
(Worked on) S7-200,300,400 HMI:
Telemachnique, Siemens, AB
Drives : Siemens, Danfoss (VLTmicrodrive,2800)AB power
flex(40,70,400),
Emerson
Industrial : Ethernet, Foundation Fieldbus, Device net, Profibus
Protocols
DCS Software : Emerson Delta v, Siemens PCS7
Project Information
Project Worked in Biocon
1. Project Name : Agitator Feedback for All reactors in Pilot Plant
Hardware : Emerson MD+ Controller, Foundation field bus and
Profibus Protocol,
I/O Card
Software : Emerson Delta V 10.3 Version DCS
Project Description:
This Project is for installation & commissioning of FF instruments and
Agitator Feed back of all reactors in Pilot plant of Chemical synthesis
Block. This Project is known for its value of Agitator RPM to achieve good
Quality of Production.
2. Project Name : HPAPI PROJECT
Hardware : CPU416-2DP, CP443-5 Interface, FDC with IM module
Software : PCS7 DCS5.0 with foundation field bus PDM
Project Description:
Design Detailing, Installation and Commissioning of entire plant as per the
end user requirement.
3. Project Name : S14 GLR and HLR Reactors
Hardware : PT, TT, Control Valve, Profibus with Pneumatic
Valve, VFD,
Weighing indicator
Software : Delta V DCS10.0
Project Description:
Design Detailing, Installation and Commissioning of Reactors as per the end
user requirement.
Projects Worked in Bimetal Bearings
* Project Name : Aerobore operation
Hardware : Messung Xmp8 processor, Messung i/p &o/p Module
Software : Messung PLC Ladder Logic
Project Description:
The final process in bearing manufacturing is Aerobore operation. In this
project we have replaced the existing Relay Logic circuit with
Programmable Logic controller. This project has helped to minimize the
breakdown and cycle time.
* Project Name : Cover pulling operation in automation plating
Hardware : Simatic CPU315-2 DP, CPU316-2DP, Profibus
DPinterface, RS 48
Repeater, MPI interface
Software : Simatic S7-300 PLC
Project Description:
The aim of the project is to automate the cover pulling operation in
automation plating by creating a Ladder Logic Circuit. Already plating M/c
Cover removal process is done manually. This project has helped in
reducing the man power.
Work Profile
> Erection & Commissioning & Planning of New m/c.
> Responsible of Preventive,Predictive and Shutdown maintenance of all
Machinery equipments
> Review of P& IDs with respect to Instrumentation point of view
> Development and continuous improvement activities
> Having Experience in handling the Projects and Maintenance activities
> Instrument calibration, performance check, configuration, isolation,
simulation, loop check, and operation check as per process requirement
> Maintenance of Electroautoplating machine running with SCADA System
using Siemens S7-300/400
> Preparation of cable list & Schedule, JB Schedule.
> Working in Delta V DCS 10.3 version and familiar with Control studio
and control modules and Graphics
> Troubleshooting of DCS in various protocols device net, Profibus,
Foundation field bus
> Experience of site technical support, pre-commissioning and
commissioning support to site based teams
> Familiar with P & I Diagrams, Hook-up drawings, Loop drawings.
> Familiar with reviewing all engineering documents & drawings related
to the Instrumentation & Electrical projects
> Knowledge of International Code and standards for the Instrumentation
design. - ISA, ANSI, API, Functional check of all ESD datasheets,
Interlock diagrams
> Having experience in Installation, Maintenance, Calibration, Loop
checking, Backup, Trouble shooting of all Process Instruments, Control
panel wiring, Software Bypassing Systems, Startup assisting and
commissioning
> Familiar with Instrument selection for Hazardous areas
> Procurement related activities like inquiry requisition, technical bid
evaluations, purchase requisition & vendor documents review
> Preparation & review of DCS database, PLC specification, logic scheme,
functional scheme etc. Vendor drawing review / co-ordination. Design
and detail engineering of Instrumentation & Control Systems
> Working knowledge of BMS and FAS system
> Preparation of instrumentation specification based on P&ID, PFD and
GA drawings
> Preparation and specification of BOQ & BOM
> Preparation of technical bid consisting of system configuration, bill
of material, compliance to the specifications.
> Generation of PLC I/O lists, instrument lists, assigning tag numbers
for instruments and mechanical equipment and assigning loop numbers
> Preparation of Instrument Index, Loop drawings,etc., using InTools
> Review of vendor documents like loop drawings, Cause and Effect
charts, Start-up sequences, I/O lists field instruments, PLC panels,
control panels for process units.
> Preparation & review of DCS database, PLC specification, logic scheme,
functional scheme etc. Vendor drawing review / co-ordination. Design
and detail engineering of Instrumentation & Control Systems
>
> Preparation of Specifications/Material Requisitions for SCADA, PLC and
DCS.
> Preparation of Bulk MTO for Instrumentation
> Training, Guidance and mentoring for subordinates
Field Experience:
. Design, Installation, Commissioning, Trouble Shooting, and Calibration
of different type of SMART & Fieldbus instruments such as Pressure,
Temperature, Flow, Level sensing, indicating and controlling
instruments of make Rosemount, Enderess + Hauser etc. Maintenance and
Calibration of different type of Analytical instruments like online pH
and DO transmitters of make Metler Toledo, Emerson and Forbes
Marshall.
. Experience on Delta-V DCS. It includes modification of existing
programs, DCS Graphics, commissioning and decommissioning,
configuration of instruments, trouble shootings and downloading of
field devices (Foundation Fieldbus Instruments) and remote control
stations which is connected with the Delta-V DCS. Online calibration
of field bus devices such as control valves, pressure, temperature,
level, flow, conductivity, DO2 and pH transmitters.
. Termination, loop checking and trouble shooting of different Control
Systems including PLC control panels and DCS control panels.
Exposure with troubleshooting of Siemens S7 300 PLC, Allen Bradley Rx
logix 5000 and of Allen Bradley.
. Installation, commissioning and maintenance of different type's
variable frequency drive (VFD). Make: Allen Bradley, ABB, Eurotherm,
Mitsubishi, Danfoss and Siemens. Installation, commissioning,
maintenance and calibration of different capacity and make of weighing
systems (Make: Metler Toledo, Novaweigh, Sartorious )
Certification Course:
. Attended Emerson 7009 Module DCS Training in Emerson Process
Management, Mumbai
. Training in Siemens PLC, HMI, SCADA in Vasundara Automation,
Bangalore.
. Attended Siemens PCS7 Training in M/Cotmac, Bangalore
Achievements
. Got achievement award for Installing chromatography system in Syngene
International Ltd
Qualification Board/University Year of passing Percentage
B.E(EEE) Anna university 2005 68.3
HSC TN State Board 2001 77.3
SSLC TN State Board 1999 87.4
Personal Information
. Languages known : English, Tamil
. SKYPE ID : srinivas.natarajan1984
. Date of Birth : 1st March 1984
. Father Name : R. Srinivasan
. Marital Status : Married
. Passport Number : G5023433 Validity up to 24-SEP-2017
. Address : A3 Antony Apartments
CBI Colony Extension
Medavakkam Chennai-100
(Natarajan.S)
Contact this candidate