Project Welding Inspector
Resume:
CURRICLUM VITAE
RAMA KRISHNA. CHINNALA
QA/QC INSPECTOR (WELDING & MECHANICAL)
Phone No: +974-********(Qatar)
+919*********(India)
E-mail:
********.**************@*****.***
Objectives
To pursue a career in the operations & back end department making the
utmost use of my education and abilities coupled with my dedication, hard
work, enthusiasm and zeal to excel in the same
Profile summery:
I am a qualified CSWIP 3.1 WELDING INSPECTOR with NDT
back ground, totally more than 8+ years combined experiences in the field
of Quality Control,in oil petrochemical & gas refineries, Hindustan
petroleum corporation, Hindustan ship yard, construction and maintenance
works in INDIA, DUBAI,ABUDHABI & QATAR. I am also well conversant with ASME
SEC IX, ASME SECVIII, and ASME B 31.3 & ASME SEC V etc.
Academic qualifications:
> SSC from Board of Andhra Pradesh,
> Board of Intermediate Education(+2), AP
> DME-Diploma in Mechanical Engineering.
Professional Qualification:
> CSWIP 3.1 WELDING INSPECTOR (Cert No: 50649)
Technical Qualification
ASNT NDT Level - II Certification in:
. RADIOGRAPHIC TESTING
. ULTRASONIC TESTING
. PENETRANT TESTING &
. MAGNETIC PARTICLE TESTING
Approved as QA/QC INSPECTOR by
1. CHIYODA ALMANA : TR-RG-385-QA-CV-0014
2. CHIYODA ALMANA : TR-RGCP-545-QC-CV-0019
3. RAS GAS : Ref.no.RG-PCI-GEN-T-TTR-0237
4. QATAR GAS : QG-TRAGS-2175-13-T086
5. SAIPEM : SA3-DOD3-LTR-0859
Professional Experience:
1. Employer: TRADING & AGENCY SERVIES Ltd. (Trags-Qatar)
(Engineering and Contracting Division)
Duration: 12-07-2013 to till date
Work profile:
Client : Rasgas
Project : procurement, Construction and Installation (PCI)
Designation : QC Inspector (Mechanical)
Duration : 12-07-2013 to till date
Client : Rasgas
Contractor : Chiyoda Almana
Project : RFS-123 RGX2 Sour Water Degasser (U-87A)
Modification
Designation : QC Welding Inspector
Client : Rasgas
Contractor : Chiyoda Almana
Project : Upgrading Velocity Of Approach System In Berth-2
Designation : QC Welding Inspector
2. Employer: DODSAL (Abu Dhabi, UAE)
Designation: QC Welding Inspector
Duration: 20-03-2012 to10-05-2013
Project: SHA GAS DOVELOPMENT (SGD) PROJECT
3. Employer: DODSAL (Abudhabi, UAE)
Designation: QC Welding Inspector
Duration: 25-06-2010 to 18-03-2012
Project: RRE PROJECT
4. Employer: INCO Group of Companies (Jebel Ali, Dubai)
Designation: Welding Inspector
Duration: 27-06-2009 to 25-04-2010
Project: UAE SHUWEIHAT S2 IWPP IN ABU DHABI
5. Employer: INCO Group of Companies (Jebel Ali, Dubai)
Designation: Welding Inspector
Duration: 27-01-2009 to 18-05-2009
Project: ALSTOM POWER PROJECT IN FUJARAH
6. Employer: Dodsal Engineering & Construction Pvt. Limited,
(Doha in Qatar)
Designation: NDT Inspector & Welding Charge hand
Duration: 23-09-2007 to 18-12-2008
Project: QPCCWP 2 PROJECT
7. Employer: Avanthi Marine Construction Works,
(Visakhapatnam, INDIA)
Designation: Welding Supervisor
Duration: 15-07-2004 to 21-07-2007
Project: Hindustan Shipyard Limited
Duties& Responsibilities:
> Incoming material inspection & preparation of documents for that.
> Dimensional checking of piping as per isometric drawings.
> Checking of pre welding parameters like root gap, root face & bevel
angle as per approved WPS.
> Check the pre-heat and inter pass temperatures.
> Check the all the welding parameter as for surveillance
> Check the final visual inspection of completed welds.
> Prepare the daily welding inspection reports & getting client
approvals
> Checking the fit up, joint configurations, alignments and surface
cleaning
before welding
> Worked with different type of materials like CS, SS, Cr Mo & alloy
steels with the use of different welding processes like SMAW, TIG, MIG
& SAW
> Interacting with clients & site coordinators.
> Monitoring the NDT activities, evaluating the test results as per code
and specifications.
> Conducting Visual Inspection of welds as per codes and standards and
offer for NDT
> Assure that all joints are exposed for examination during pressure
test.
> Confirm repairs, re-testing and re-inspection in accordance with
specifications.
> Knowledge on the welding process includes SMAW, GTAW and SAW.
> Reviewing the approved quality plans, manuals, and scope of work to
perform the required inspection.
> Interpretation of RT films and acceptance of welds.
> Calibration of Inspection Instruments and Welding Equipments for
processes like SMAW, GTAW, GMAW etc.
> Review of PWHT charts and their approvals.
> Hydraulic and Air testing of compartments, airtight structures and
pipelines.
> Temperature and Time control and review of charts for Heat treatments.
> Raw material receiving inspection, review of material certificates to
check mechanical strength, Chemical composition values in accordance
with ASME codes and project specifications
> Verifying drying and holding temperature and time for low hydrogen
electrodes and checking the proper usage of Consumables at site.
> Assuring that quality requirements and inspections are performed in
accordance with the approved company Project's Specification &
Method Statements, Inspection Test Plan (ITP)
> Raise request for inspection (RFI's) for specific jobs inspection
> Preparation of final handover complete dossier for Welding, and
Mechanical activities.
> Attending quality control meetings with the client and third party.
> Carry out final inspection together with Client/Third party inspector
upon completion of all welding, painting, mechanical work.
References
V RAJESH VERMA. Quality control Manager. TRAGS QATAR,
Ph no : +974-********
Personal Details:
Name :
Chinnala. Rama Krishna
Father's Name : Ch.
Appanna
Date of birth : 10-04-1986
Marital Status :
Married
Passport No : G
2149630
Date of Issue : 26-
04-2007
Date of Expiry : 25-04-
2017
Nationality : Indian
Languages Known : English,
Hindi & Telugu.
I do here by declare that the above information is
true and to that best of my knowledge.
(CHINNALA. RAMA KRISHNA)
Contact this candidate