Engineer Project
Resume:
HELTON BRUZE .G
BGAS LEVEL 2 Painting Inspector
ISO 9001 Lead Auditor
Mobile Number: KSA- +966*********, INDIA- +917*********
E-mail ID:************@*****.***
Objective
An enthusiastic & Innovative Mechanical Engineer aspiring a career in a
growth oriented organization to utilize acquired skills and knowledge in
achieving organizational goals, while attaining personal and professional
growth. I am seeking a challenging position in Quality Assignment of
Welding & Painting Inspection.
Educational Qualification
Diploma in Mechanical Engineering
B.E-Mechanical Engineer
Professional Qualification
Certified as Welding Inspector CSWIP-3.1(Certificate No: 73392).
Certified as Painting Inspector BGAS LEVEL 2(Certificate No: 83914).
Certified as ISO 9001 LEAD AUDITOR.
Certified QC Engineer in (ASNT LEVEL II in RT, UT, MPT, PT, VT).
Certificate course on Safety (PST, FPFF, EFA, PSSR, HUET).
Certificate course on Basic Offshore Safety Induction & Emergency Training
(BOSIET)
Career Summery
8+ years of experience in various oil and gas (offshore & onshore) and
power industry in welding / NDT of piping / instrumentation structural /
painting /storage tanks & drums, heat exchangers, columns, LPG & propylene
mounted bullets, pumps, air blowers, level gauges, Pig launcher, capstan,
hydro test for hydrogen receiver tank, Novac System, Nitrogen skid, MOV,
Deluge system, BOP, Internal fuse, Metering skid, christmas tree valves,
Strainers, Sigma XT panels, Safety alarm system, electrical hoist for oil &
gas and testing, commissioning of various systems.
Professional experience
Company- TUV NORD (KSA)
Position- QA/QC Engineer-MDI (VID & PID)
Project- Third party Inspection
Date- August 2013 to till date
Duties
. Inspection of incoming material like piping, fitting, valves etc.
. Witness of PQR.
. Witness of welder qualification test.
. Involved in the inspection of static equipment such as pressure
vessel, heat exchanger steam boiler, storage tank, process heater &
industrial valve.
. Check for PMI & Review of reports.
. Involved in the inspection of pipeline.
. Witness of painter, blaster qualification.
. Inspection of FBE coating
. Inspection of FBE & 3 layer polypropylene coating.
. Witness of laboratory paint testing such as bend test, impact test,
curing test etc
. Witness of internal coating.
. Involved in cathodic protection of pipeline, above ground storage
tank, etc
. Review all test certificates for received materials for conformity
according to international standards.
. Witness of fit up (dimension, level, orientation, elevation), material
traceability prior to welding.
. Witness of mechanical testing co-operated with third party.
. Witness of welding (before, during & after) & checking the parameter
according to WPS/PQR for structural steel & piping.
. Witness of heat treatment and PWHT.
. Witness of holiday detection.
. Witness of NDT (MT, UT & DP) f or weld joints, preparing NDT reports.
. Witness of Blasting and Painting.
. RT film interpretation.
. Inspection of blasting, painting & coating.
. Inspection of hydrotest for piping spools, valves & skids.
. Inspection of mechanical testing in laboratory.
Company- CCTC oil & gas LLC (UAE)
Position- QA/QC Engineer-MDI
Project- UMM AL DALKH FACILITIES INSTALLATION OF ELECTRICAL SUBMERSIBLE
PUMPS AT WHP 07&15 PROJECT NOS. 7323 & 7324, NPCC onshore, offshore
construction project (oil& gas)
Date- April 2010 to July 2013
Duties
. Implementation of Quality System at site.
. Review all relevant documents such as technical procedure, Method of
statement (MOS), Inspection test plan (ITP), QAQC Planning.
. Preparing WPS, PQR & conducting welder qualification test.
. Verifying the incoming materials for appearance, conformity accordance
with MAR.
. Review all test certificates for received materials for conformity
according to international standards.
. Witness of fit up (dimension, level, orientation, elevation), material
traceability prior to welding.
. Witness of mechanical testing co-operated with third party.
. Witness of welding (before, during & after) & checking the parameter
according to WPS/PQR for structural steel & piping.
. Witness of heat treatment and PWHT.
. Witness of holiday detection.
. Witness of FAT for sigma XT panels.
. Witness of operational functional test for offshore safety, alarm
system.
. Knowledge in ASME, GOST, PNAEG, AWS & API Standards.
. Witness of NDT (MT, UT & DP) f or weld joints, preparing NDT reports.
. Witness of Blasting and Painting.
. Inspection of drilling equipment like BOP, Stabilizer, Internal fuse
and dimension check.
. Check blasting profile and make a record.
. Check DFT, preparing reports.
. Witness of installation of equipments like chemical injection skid,
Novec system, Deluge skid, Nitrogen bank, drain vessel, pump, valves.
. Witness of Functional test for special types of valves like MOV.
. Erection of valves and pumps.
. Witness of FAT for HVAC control panel, HVAC power panel.
. Preparing hydro test package system wise & witness of hydrostatic
testing for piping system.
. Witness of box up & torquing for flanges for pre commissioning.
. Witness of painting for piping, structural according ITP/Client
specification.
. Co ordination with client /consultant & offering the inspection stage
wise by RFI as per ITP.
. Review of welding procedure specifications and welding operator's
qualifications, to ensure client and "Code" compliance.
. Preparation of inspection test plan and project specific reports.
. Attend client meeting & coordinate inspections with client & third
party.
. Inspection of sub-assemblies and finished items for appearance,
workmanship, dimensions surface conditions and operability.
. Witnessing of any and all required tests strictly in accordance with
approved drawings, procedures and specifications.
. Witness of any required testing mechanical/chemical, to ensure that
the finished items comply with the approved procedures and
specifications.
. Witness of rigid foam, mineral wool, glass wool, aero gel, etc
insulations.
. Final inspections prior to dispatch which may include, but not be
limited to, cleaning, coating, packing and marking of equipment,
review of vendor final documentation dossier.
. Sample collection, packing & storage monitoring, loading/unloading
supervision.
. Stage Inspections of steel & fabrication items, raw materials and
inputs including process inspection & assurance.
. Issue and manage Corrective Action Request (CAR) and Preventive Action
Request (PAR)
. Develop and manage the Company Quality Management System in compliance
with applicable Quality Policies, Standards and existing procedures.
. Conduct vendor assessment audit & expediting on behalf of client.
. Provide support to other departments for analyzing, defining and
improving operating processes in order to implement an effective
Quality System
. Liaise with the Quality System Certification Body and other regulatory
bodies for ISO9001 certification activities
. Provide training to new employees on quality matter
. Analyse data coming from projects and processes (Customer Satisfaction-
CS, Non Conformity-NC, complaints and lesson learned
. Issuance of detailed reports like inspection report, release note,
audit report with specifying to the various activities performed and
material dual certification & Type 3.2 certification as per EN
10204:2004.
Company- Tyco International (UAE)
Position- QA/QC Inspector
Project- ZADCO onshore, offshore construction project (oil& gas)
Date- April 2009 to April 2010
Company- Kharafi International (UAE)
Position- QA/QC Inspector
Project- Onshore Abu Dhabi Oil Refining Company (TAKREER) project.
Date- April 2008 to April 2009
Company- Serck Services International (UAE)
Position- QA/QC Inspector
Project- Offshore Pig launcher fabrication, inspection and erection
project.
Date- May 2007 to April 2008
Company- L & T Ltd (INDIA)
Position- Welding & painting supervisor
Project- NPCIL Pipeline, Structural construction project.
Date- April 2006 to April 2007
Duties-Welding and painting Inspector (Piping, Structural, Painting &
Underground diesel tank)
Training completed
Participated in safety induction training in NPCIL on behalf of L&T.
Participated in quality induction training in NPCIL on behalf of L&T.
Participated in safety induction training in NPCC on behalf of CCTC.
Participated in quality induction training in NPCC on behalf of CCTC.
Participated in safety induction training in ZADCO on behalf of CCTC.
Participated in quality induction training in ZADCO on behalf of CCTC.
Participated in basic offshore training in ZADCO on behalf of CCTC.
Participated in SOLAS in ZADCO on behalf of CCTC.
Computer Proficiency
solid work, auto cad, ms office, PHOTO SHOP, C++, HTML
Personal Details
Date of Birth : 7/8/1989
Nationality : Indian
Saudi Driving License No : 237*******
India Driving License No : TN74 200********
Language Known : English, Hindi, Tamil
Address : Jubail, Saudi Arabia
Passport Details
Passport Number : K 2497282
Issued at : Madurai
Issued Date : 9-01-2012
Valid up to : 8-01-2022
Declaration
I hereby declare that the above all details are true to the best of my
knowledge and belief.
Yours Faithfully,
G.HELTON BRUZE
[pic]
Contact this candidate