Project Manager
Resume:
Shawn A. Davis
**********@***.***
Dynamic and results driven Mechanical Engineer / Project Manager with 12+
years experience developing and implementing Best Practices that maximized
Safety, Quality, Cost and Schedule
Work experience in Chemical Manufacturing plants, Industrial Manufacturing
facilities, and in Oil & Natural Gas refineries. Strategic thinker with
drive and initiative to solve problems. Critical decision maker with
sensitivity to business objectives and demands. Clear communicator, self
starter and hard working. Knowledgeable in identifying inefficient
processes and resolving the situation at hand. Experienced at completing
demanding projects within crucial timelines. Detail and process oriented
with strong follow up skills. Excellent interpersonal skills across all
levels of communication while including the exchange of complex technical /
manufacturing / industrial data. Trained and mentored personnel to help
enhance a team-oriented work environment.
SKILLS, ABILITIES & Achievements MATRIX VALUE OFFERED
Core Competencies / Strengths at a Glance:
Analysis ( Strategic Planning ( Budgeting ( Risk Assessment ( Asset
Management ( Procurement ( Quality Assurance ( Metrics ( Cost Controls (
Team Management ( Safety Implementation ( Forecasting ( Construction
Installation( Procedure Upgrades ( P&ID ( Scheduling ( Bid Process (
Regulatory Compliance ( Process Improvement ( Sales
[pic]
CAREER SNAPSHOTS
Leadership: Led and executed Methylamine (MAP) capital projects from work
request through design and construction. Le ad Mechanical Design Engineer
and provide leadership, guidance, and project priority to design team.
Technical Expertise: Managed and implemented capital projects during unit
start-ups and shut-downs. Implemented emergency and abnormal projects while
maintaining compliance in safety, cost and quality. Organized sequential
turnover of capital projects with area management. Participated in High
Hazard Processes on multiple projects.
[pic]
Career Track & Performance Driving Forces
Project Manager
August 2014 - PRESENT
Capital City Construction
October 2009 - August 2011
Charleston, WV
.
< Work closely with the client to establish project scope, schedule, and
cost objectives.
< Ordered all materials and scheduled construction of projects.
< Schedule the project in logical steps and budget time required to meet
deadlines.
< Inspect and review projects to monitor compliance with building and
safety codes, and other regulations.
< Prepare contracts and negotiate revisions, changes and additions to
contractual agreements with architects, consultants, clients,
suppliers and subcontractors.
< Obtain all necessary permits and licenses for all projects to remain
in compliance to state and federal laws.
< Plan and schedule project work, order the materials from approved
suppliers, track timing and cost.
< Requisition supplies and materials to complete construction projects.
< Prepare and submit budget estimates and progress and cost tracking
reports.
< Develop and implemented Quality Control guidelines and procedures for
every project.
< Take actions to deal with the results of delays, bad weather, or
emergencies at construction site.
< Confer with supervisory personnel, owners, contractors, and design
professionals to discuss and resolve matters such as work procedures,
complaints, and construction problems.
< Plan, organize, and direct activities concerned with the construction
and maintenance of structures, facilities, and systems.
Minor Team Leader / Project Manager August 2011 - AUGUST 2014
DuPont / Jacobs Engineering / KBR
Belle, WV
< Project Manager over multidisciplinary design team, coordinated
construction with Construction Managers, and facilitated the project
through Process Safety Startup Review (PSSR) for Minor Capital
projects up to $1.2M.
< Responsibilities include managing project budget, CapEX forecasting,
Procurement, and Direct Capital Purchases.
< Ensure Front End Loading (FEL) process is followed consistent with the
business needs. All required FEL deliverables are accomplished in a
quality manner, and leads the project gate reviews.
< Experienced in project scope development, work hour estimates, and
forecasting project expenses.
< Coordinate projects internally with the engineering design group that
includes process, mechanical, piping, electrical controls, and civil
engineers.
< Completed installation of projects involving over 3000 ft of 3"-10"
304SS piping, 480 Volt 3 phase motors, Flame Arrestors, Pilot Pressure
Operated Conservation Vents, Distributed Control System (DCS), Air
Quality Control System (AQCS), Flame and Gas Detection System, Civil
Structural modification of Pipe Racks and Loading Spots, Pressure
Sensors \ Transmitters, Temperature Sensors \ Transmitters, 8 Shell &
Tube Heat Exchanges, Process Coolers, Thermal Couples, Compressors,
Centrifugal Pumps 5hp-60hp, and 46 Encon Safety Showers in the
Methylamines business unit.
< Ensured adherence to Process Hazard Analysis (PHA), Process Safety
Management (PSM), Ergonomics, Environmental, MIQA, export controls and
trade secrets principles,
< Regularly meet with the project steering team to ensure alignment with
business and functional direction, request staffing support, seek
assistance with issue resolution, make strategic project decisions and
provide status updates, throughout execution of all aspects of the
project.
< Plan and coordinate project work, order the materials from approved
suppliers, track lead times, and manage the design.
< Ensure compliance for all Environmental, OSHA, DEA, and DuPont
business practices.
< Managed over 40 minor capital projects at DuPont Belle, WV Chemical
manufacturing facility.
Regional Sales Manager January 2005 - September 2009
Jlg Industries
Chicago, IL
< Midwest US & Canada - Service 17 state territory through regularly
scheduled business visits.
< Achieved Distinguished Sales Award in 2005 with over $31M in sales.
< Work directly with customers determining equipment needs and drive
increase in sales of JLG products through all markets in the assigned
territory.
< Communicate market needs and trends to senior management.
< Assist with sales forecasting activities and determine sales
objectives.
< Monitor and evaluate activities of the competition in the
< Deliver sales presentations to key clients in coordination with sales
representatives.
< Consistently manages multiple priorities while meeting deadlines.
< Aggressively expand sales and service activity throughout designated
territory.
< Meet and/or exceeded sales, margin and profitability targets for
designated territory.
< Assure each operation is in line with JLG parts policy and procedures.
< Involved with parts marketing programs and assist in availability of
parts at the factory.
< Perform customer-training sessions for Online Express ordering system.
Industrial / Mechanical Engineer July 2004 - December 2004
Jlg Industries
McConnellsburg, PA
< Performed process planning, facility and manufacturing cell layouts,
line balancing, capacity analysis, time studies, and equipment
procurement.
< Participated on Six Sigma project team to upgrade manufacturing line.
Lines Design Engineer April 2003 - July 2004
Allegheny Power
Thurmont, MD
< Design and serve as the company contact person for residential,
commercial, and industrial customers' requesting new service, the
upgrading of existing service and the relocation of facilities.
< Assist Electric Operations managers in coordinating and scheduling
normal work and service restoration during storm trouble
< Meeting with peers and clients to determine specific system needs and
requirements, such as power usage specifications.
< Requisition materials, equipment and create designs to fit system
requirements.
< Generate computer-aided design software (CAD) to create mathematical
models and system designs.
< Test designs to check electrical clearances, perform sag-tension
analysis and evaluate other parameters.
< Responsible for coordinating project with sales teams.
< Develop budget, including preparing construction bids for labor,
materials and equipment.
INTERNSHIPS
MARATHON OIL COMPANY MIDLAND, TX MAY
1998 - SEPTEMBER 1998
COLUMBIA GAS TRANSMISSION CHARLESTON, WV MAY 1999 - SEPTEMBER 1999
COLUMBIA GAS TRANSMISSION CHARLESTON, WV MAY 2000 - SEPTEMBER
2000
[pic]
EDUCATION
Bachelor of Science: Mechanical engineering Graduated 2002
West Virginia University Morgantown, WV
Defensive back - Football 1998-2001
West Virginia University Morgantown, WV
[pic]
TRAINING & CERTIFICATIONS
(Six Sigma ( Project and Time Management Certification ( Process Safety
Management
( Root Cause Analysis ( Fall Protection and Prevention Certified ( DuPont
General Site Conditions ( Lock Tag and Try
[pic]
SOFTWARE PROFICIENCIES
SAP ( PowerPoint ( Excel ( Word ( Outlook ( Share Point
[pic]
References and further data provided upon establishment of mutual interest
Contact this candidate