Inspects and tests welded joints of work in progress and of completed
Resume:
CURRICULUM VITAE
Ilyas iqbal
DME E-mail :*********@*****.***
***********@*****.*** Mobile :+91-
QA/QC CERTIFIED WELDING INSPECTOR (AWS)
Objectives & goals:
To obtain a position in welding inspection where in my professional and
academic skills can be utilized to the best of the organization.
Expertise:
Category: QA/QC WELDING INSPECTOR.
Ability: Experienced.
Experience: 6. years
Education & Training:
1) DIPLOMA IN MECHANICAL ENGINEERING.
National Institute Of Engineering Maharashtra (India).
2) Technical Qualification:
Successfully completed AWS (American Welding Society with 89%) in 2009
Certification Code : 09084611
3) American Society for Non-Destructive Testing
(ASNT-Level-II) in Radiographic testing
(ASNT-Level-II) in Ultrasonic testing
(ASNT-Level-II) in Magnetic Particle testing
(ASNT-Level-II) in Dye penetrant testing
Work Experience:
Organization 1: CJCC CHINA JILIN CHEMECAL PETROLEUM COMPANY
IN ABUDHABI SUB CONTRACTOR WORK FOR
ONE YEAR 17-08-2013 TO 10-08-2014
Client : TAKREER
contractor: SAMSUNG
Project: CARBON BLACK DELAYED COKER
Organization 2: C.A.T CONTRACTING AND TRADING COMPANY SAUDI
ARABIA AL KHOBAR 1 YEAR 2011 TO 2012 WITH
ARAMCO APPROVAL Work in (Gas well heads ) and
cross
Country pipelines in hawiyah & haradh Saudi
arabia
Working as a Quality Control Inspector -Welding
From September 2011 to Present.2012
Client : Saudi aramco
Project: khuff gas project Saudi Arabia.
Responsibilities:
. Keen observation of job for quality as per quality stands.
. Visual inspection of welding of plate before inspector inspection.
. Site preparation for radiography of butt welding in tank shell plate.
. Preparing of daily progress report, offering joints for radiography.
. Report preparation of NDT works.
To co-ordinate with client inspection engineer for further
inspection
. To co-ordinate with client inspection engineer for further inspection
of each equipment.
. To witness & follow op of all NDT inspection. DPT,MPI & RT on plant
equipment. weld joints.
. Interaction with Client for clearance and starting of activities.
. Inspection before, during & after welding.
. To assure welding being carried out in accordance to WPS & only
certified welders are employed in the job.
. To assure welding consumables are used in accordance to WPS.
. Inspection activities as per Inspection Test Plan.
Organization 3: IOCL INDIAN OIL CORPORATION LIMITED
Working as a Quality Control Inspector (Welding)
2009 to 2011
Client 1: Hindustan Petroleum Corporation Ltd panipath
refienery
Project: DELAYED COKER UNIT
Client 2: IOTEP
Responsibilities:
. Monitor and maintain control records for welding consumable and
Welder performance record
. Conduct Welder's qualification test.
. Welding Visual Inspection Before, during & after Welding.
. Ensure Approved Drawing, Project specification, WPS as well as
Qualified welders are available.
. To study the isometric drawing received from the clients and to
identify the pipe lines and carry out the inspection work.
To Check the material is in accordance with the drawing / WPS, and
Ensure that the material is free from damage and contamination.
. Review the WPS and WQT as per ASME IX and project specificatio
. Maintaining pre heat, inter pass temperature as per recommendation.
. Maintaining PWHT and control cooling as per recommendation.
. Inspection of welding fabrication and orientation of spools as per the
Isometric drawings.
. Witness the welding process of dissimilar pipe material joints.
. Prepare daily welding report (DWR).
. Liquid Penetrant examination using water washable methods.
. Monitoring pre heat and PWHT of welding joints for the various
Materials as per standards.
Organization 4: GAMMA WELD INSPECTION SERVICE
Worked as a ndt inspector from 6th June 2007 to
2009
Client : GAAMA INDUSTRIES
Responsibilities:
. Review all inspection reports are signed.
. Inspection of repaired joints, rejected during NDT.
. Monitor weld repair rate and implement corrective action to reduce the
repair rate.
. Inspection and thickness calculation of Drums, Vessels, Tanks,pipes
by UT method.
. To monitor the progress of piping fabrication and erection.
. Supervision of pipe fit ups in site and shop.
Responsibilities:
. Inspection of welding electrodes that the welding electrodes should
not be in damage condition.
. Maintaing the temperature of welding electrodes in baking and holding
ovens according to WPS.
. Ensure the correct interpass temperature is maintained as per WPS.
. Ensure post heating, soaking and cooling as per WPS.
. Daily inspection of pipe fit ups of large and small bore pipes.
. Verification of Material traceably records and ensures that only
Acceptable materials are used.
. Minimum & maximum preheat temperature is maintained in accordance with
WPS if required.
. Checking of essential variables like current, voltage, polarity,
Temperature, filler wire, electrodes etc.
. Ensure that Inspection / Testing equipments at site are with valid
Calibration.
. Co-ordination with post welds heat treatment and NDT Sub contractors.
. Maintain & update all quality related documents at site.
. Ensure that to transfer the Specification and Heat Number during the
cutting of pipe.
. To check the fit up stage prior and confirm that root gap, off set,
bevel angle are with in acceptable limit.
. Monitoring the calibration of test instruments and equipments.
. To monitor fabrication and erection of pipe supports as per isometric
drawings.
.
Other Duties and responsibilities:
1. Witness the HYDROTEST at site and shop as per the test pressure.
2. Witness the PNEUMATIC test activities for spools
3. Witness the HYDROTEST at site and shop as per the test pressure.
4. Witness the PNEUMATIC test activities for spools.
5. Review the radiographic films of welded joints.
6. Supervision of PWHT & PMI, RT, UT, PT, MPI activities.
7. Maintain & update all quality related documents at site.
8. Interpret/Review NDT reports and maintain all related file and
records.
9. Monitoring the installation of heat transfer compound.
10. Conduct Toolbox talk weekly to welders and pipefitters to reduce
repair rate.
9. Carry out all the activities under the HSSE rules.
Computer skills:
1. Installation and operation of M.S Office, Windows 98,2000Xp, Vista etc.
Personal Details:
Name: ilyas iqbal
Nationality: Indian.
Profession: 1) Diploma in Mechanical.
2) QA/QC Certified Welding Inspector
(AWS)
Passport No : H 6776090
Place of Issue : Bangalore
Date of Issue : 04/08/2009
Date of Expiry : 03/08/2019
Contact No: +91-779*******
E-mail: ***********@*****.***
PERSONAL DETAILS
Name : Ilyas Iqbal
Father's Name : Mehboob Patel
Gender : Male
Date of Birth : 27/01/1983
Marital Status : married
Nationality : Indian
Languages Known : English, Hindi, Urdu & Kannada
Date:
Place: karnataka gulbarga
(ILYAS IQBAL)
Contact this candidate