Project Construction

PIPING DESIGNER

I lead with passion and integrity. I am intuitive and detailed oriented - Accomplishing project goals!

Solid career history of over 15 years in the Engineering and Construction Industry through strategic planning and operational

improvement. Keen eye for analyzing problems and determining viable solutions. Effectively manage the implementation of

full cycle project planning and piping conceptualization and design. Expertly specializes in applied constructability, operability,

and maintainability with knowledge of construction standards and engineering practices. Demonstrated ability to develop and

execute quality satisfactory projects.

PROJECT MANAGEMENT PIPING DESIGNING TEAM LEADERSHIP

SELECTED ACHIEVEMENTS

Completed 6,500 Laser Scans in 2 years; Making BP TexasCity Refinery a leader in Laser Scanning Technology and

supervised the installation of BP GPS Leica base station for TexasCity Refinery.

Provided dimensional control and Laser scanning services for all critical and emergency situations in the BP Texas

City Refinery; heavy lifts, damaged structures, fatalities, and project forensics.

Authored article about offshore construction and laser scanning which was published in UK Civil Engineering

Magazine

Created accurate 3D models of oil and gas refineries and chemical plants from laser scans for major engineering and

construction firms, utilizing cutting edge technology.

Bridged sensitive engineering design project information between offices in Canada, Belgium, Japan, Mexico, Saudi

Arabia and United States.

Key member of design team involved with the structural and piping fabrication drawings for new and existing offshore

oil and gas platforms.

PROFESSIONAL EXPERIENCE

LASER SCANNING PRACTICE LEAD PIPING Jacobs Engineering, Houston, TX, 2013 - Present

Work with piping designers to capture tie points for new piping routes and perform dimensional control for critical

piping and equipment.

Responsible for surveying offshore platforms for structural and piping upgrades and for field sketches and

measurements.

Operate various 3d Lasers for physical data capture of facilities on shore and offshore and non-contact measuring

equipment for creating asbuilts.

Create proposals for laser scanning projects and schedule work crews to various project locations.

Possess HASC Basic Plus Card, TWIC card, Smith Driving Safety Training and OSHA 10.

Sketching piping and structural asbuilts.

PIPING DESIGNER Keystone Engineering, New Orleans, LA, 2013 - 2013

Designed piping and pipe supports using cadworx, fabrication and installation specifications, and piping designs

through all design stages, which included conceptual, preliminary, and detailed design.

Performed dimensional control for critical piping and equipment offshore, constructability reviews and picture

markups for demo and installation packages.

Managed field sketches and measurements, isometric and shop drawings, asbuilt drawings, cadworx modeling

structural and piping.

Read and sketched Piping & Instrument Diagrams and created P&ID's markups and walkdowns.

PROJECT MANAGER OFFSHORE SERVICES PIPING Grand Isle Shipyard, New Orleans, LA, 2010 - 2013

Achieve project objectives and contributed information; recommended strategic plans, prepared and completed action

plans in modeling piping, deck extensions and locating new process equipment.

Created construction Iso’s drawings using Isogen/cadworx, created work packs, field sketches, field measurements and

operated various non-contact measuring equipment for creating asbuilts.

Operated Various 3d Lasers for physical data capture of facilities on shore and offshore and performed design reviews

and clash detection with owner operators.

Verified pipe spools using Leica total stations and tape measure and used laser scans that ensured constructability and

mitigated project risk.

Created trueviews to compare preliminary design against what is physically in the field and various piping supports

weld on and bolt on types.

PIPING DESIGNER Taylor and Hill, Houston, TX, 2007 - 2010

Created construction Iso’s drawings using Isogen/cadworx, created work packs, field sketches, field measurements and

operated various non-contact measuring equipment for creating asbuilts.

Operated Various 3d Lasers for physical data capture of facilities on shore and offshore, reviewed 2d and 3d CAD

drawings, and performed design reviews and clash detection with owner operators.

Verified pipe spool using Leica total stations and tape measure and used laser scans that ensured constructability and

mitigated project risk.

Created various piping supports weld-on and bolt-on types, laser scan databases, and true views to compare

preliminary design against what is physically in the field.

JR. PIPING DESIGNER/LASER SCAN TECH (Angola Africa) EDG, Houston, TX, 2005 - 2007

Created 3d pipe models for new fire water systems, isolation drawings for pre shut-in work, and routed gas lift piping

for new wellheads.

Trained Angolan Nationals in various project and piping management tasks as required.

Scheduled projects and daily reports of progress and provided facility engineering support.

Created construction Iso’s drawings using Isogen/cadworx, created work packs, field sketches, field measurements and

operated various 3d Lasers for physical data capture of facilities.

SELF-EMPLOYED T&E Environmental, Houston, TX, 2003 - 2005

Provided construction services for commercial construction projects and manpower for projects in the Houston area.

Installed drain piping for job sites, custom fences for large and small projects and performed services to eliminate

punch list items for commercial projects.

Created proposals for construction projects; worked directly with vendors, third-party affiliations and project clients

and resolved any issues promptly.

Implemented production, quality, and customer-service standards; resolved problems, completed audits, identified

trends, determined system improvements and implemented change.

Provided construction manpower to various project locations.

JR. PIPING DESIGNER/LASER SCAN TECH INOVX Solutions, Houston, TX, 2001 - 2003

Provided services in 3D pipe modeling using Plantlinx & Autocad, and laser scanning and surveying of refineries.

Created Laser Scan databases and Asbuilt modeling of equipment and piping.

Conducted and arranged ongoing technical training and personnel development; conferred with management and

identified training needs based on projected production processes, changes, and other factors.

Performed specific design functions for the project, provided work assignments and guidance to others, developed and

maintained schedule.

EDUCATION

ITT Technical Institute

Associate of Applied Science in Computer Aided Design Technology

Primatech Training Institute

Hazop and Hazardous Analysis Team Leader Training course

Petroleum Education Council

Offshore safety Course, Hydrogen Sulfide Safety Training Course, BP Water Survival Training

Huet Training

University of Houston

Process Plant Layout and Design (SPED) Advanced Microstation (SPED) PDMS I & II (SPED)

Houston Community College & North Harris Montgomery Community College

Autolisp and Visual Basic Programming

UltraSonic Testing, Welding Metallurgy, Welding Inspection, Magnetic Particle & Dye Penetrant Inspection API and ASME

codes

TECHNICAL SKILLS

Proficient in: Autocad 2012 & 2013, Cadworx 2012 & 2013 Plant Pro, Faro Scene, PDS I & II, PDMS I & II, Leica Cyclone &

Cloudworx, Leica Geo-Office, Microstation, Windows, Microsoft Office & Project, Excel, Visio, LFM - Server, Viewer Lite,

Modeler, Leica 1103,TS11and 1201series total stations, Leica 6001, Scanstation 2, Smart Plant Review, Faro Focus 3d, Accura

Survey bestfit software.

Contact this candidate