Maintenance Electrical
Resume:
[pic]
AM City Homes
Subdivision
Alibagu, Ilagan
Isabela
Philipines3300
Richard Sasam Rodrigo
Profile Electrical Engineering graduates a Registered
Master Electrician with working knowledge of
Instrumentation and Control in Oil & Gas refineries
and gold mine company. Experienced in maintenance
planning in gold mine. Experienced in maintenance
of LIEBHERR heavy duty crane.
Experience Overseas / Abroad
Aug. 2011 - 2014 PT Pelarayan Kartika Samudra
Adijaya, Indonesia
Electrical Officer - Offshore Floating Crane
In charge in electrical maintenance of LIEBHERR
crane type FCC-CBG35 (45)/35 litronic. Prepared
preventive maintenance plan base in the crane
maintenance checklist and give work to be carried
out by electrician, such as changing of hydraulic
oil and filters, gearbox oil, greasing intervals of
main motors bearing, winches and pulleys.
Implement daily checklist and routine inspection of
crane running machineries such as hydraulic pumps,
motors and gearboxes to monitor the temperatures,
to check the condition of hydraulic hoses and oil
leaks and to ensure that all hydraulic system,
controls and sensors of the crane operate
efficiently.
Carry out preventive maintenance of crane
electrical controls troubleshooting and repair.
Changing of hydraulic pumps, variable displacement
motors and multi disc brake. Overhauling of
gearboxes adjusting pressure of all pumps and crane
gear cam limit switches.
Monitors the condition of rope pulleys and crane
wire ropes. Plan and prepares maintenance schedule
of crane and coordinates to chief engineer of crane
maintenance activities.
Oversee crane spare parts requirements and ensure
all requested spare parts are correct. Conduct
monthly spare inventory and reports.
Assist to chief engineer of scheduled PMS and
repair works of engine machineries including
maintains of electrical and control system of
generators 2x1600KW Cummins V-line 16cylinders
electronic controlled fuel system. Carry out daily
inspection to ensures all batteries, instruments
and switchboard control operates effectively.
Feb.2010 - 2011 PT Mitra Swire CTM
Jakarta, Indonesia
Chief Electrician - Offshore Floating Crane
Supervise and maintains floating crane electrical
equipment and control of conveyor system and
LIEBHERR heavy duty crane. Carry out
troubleshooting of PLC and repair of frequency
converter of conveyor system.
Supervise of PMS work and repaired of LIEBHERR
crane equipment. Responds to major break-downs
diagnoses and repairs of crane hydraulic system,
changing of pumps and motors, changing of ropes and
pulleys and fault finding analyzes of LIEBHERR
crane controls.
Supervise troubleshooting and repair of electrical
and control system of generators 2x1690KW
Mitsubishi V-line 16cylinder. Carry out daily
inspection to ensures all instrument and
switchboard control operates effectively.
Assist to chief engineer of scheduled PMS repair
and overhauling of all engine machineries such
pumps, motors, OWS, purifier, FW maker compressors
and air conditioners including deck machineries
such mooring winch, windlass, capstans all electro
hydraulic combine. Analyze equipment performance
and implement improvement ideas.
Plans and prepares maintenance schedules of all
equipments. Coordinates with the chief engineer for
proper scheduling of all maintenance activities and
repair works. Conducts monthly spares inventory and
prepares monthly report.
Jan. 2002 - 2009 Saudi Arabian Mining Company
Saudi Arabia
Instrument Technician Charge hand - Maintenance
Maintains of all running conveyor motor, vibration
motor, cone crusher motor, jaw crusher motor and
leach agitator motor. Carry out routine inspection,
maintenance and repair work. Troubleshooting and
fault finding analyzes of DCS, PLC and frequency
drives (ABB & Modicon)
Maintains of large high voltage 4.16kv motor of
ball mill and rod mill. Carry out routine
inspection, maintenance and repair work regularly
cleans. Checks carbon brushes and slip rings on
scheduled PMS. Inspections of motor switchgear
mechanism, liquid starter, and lubrication control
system. Responds to break-downs, diagnoses and
repairs electrical control systems.
Maintains of water tube boiler, carbon reactivation
kiln, electro winning rectifier and furnaces. Carry
out maintenance and repair work, calibration of
instruments like control valves, pressure, flow,
and temperature transmitters. Ensures that all
instruments operate efficiently and effectively.
Modify and design electrical control system.
Troubleshoot and repair of electrical control
system of mobile and stationary compressors, well's
generator, mobile vehicles and mine drill rigs
which involve a combination of hydraulic and
pneumatic principles.
Install new systems and equipment to existing plant
electrical equipment. Test to ensure new
installations are in accordance with approved
specifications and requirements and continuity of
circuit.
Maintains and installations of computers networks,
VSAT and router switches, PABX telephone including
troubleshooting and ensures its proper operation at
all times.
Jan. 2004 - 2006 Saudi Arabian Mining Company
Saudi Arabia
Acting Maintenance Planner - Maintenance
Plans and prepares maintenance schedules of all
equipment, mobile vehicles,
electrical/instrumentation and A/C equipment
according to manufacturer's specifications,
condition of equipment and operational experience,
to ensure that the maximum utilization of labour
resources and availability of material and
equipment is attained.
Liaises with Mechanical and Electrical Foremen and
prepares maintenance activity schedules based on
equipment manufacturer's recommendations, plant
operational experience and equipment condition
Conducts equipment inventory, start up and
pre-service inspection on all production equipment
and support equipment
Analyzes repair history to convert results into
planned maintenance works
Coordinates with the Maintenance and Operations
Foremen for proper scheduling of all maintenance
activities and repair works.
Receives work orders and presents to Maintenance
Foreman for proper delegation. Logs work orders
onto computer system for proper cost accounting.
Develops and recommends internal procedures and
standard policies utilizing advance methods and
technologies to further enhance existing
maintenance procedures and practices.
Assists in the preparation of departmental budgets
and exercises cost control in the planning of
maintenance activities and coordinates with
purchasing and warehousing departments so that
their services in support of maintenance program
are carried out effectively.
Ensure that the performance of all maintenance
activities is in compliance with the safety rules
and regulations as stated in the company handbook
by labor law.
Feb. 1999 - 2001 Consolidated Contractors
Company UAE
Instrument Technician - ADNOC Onshore/Offshore Gas
Project
Installs, calibrates, maintains and repairs complex
electronic instruments and control systems within
Refinery and Petrochemical Plant which involve a
combination of electrical, electronic, mechanical,
hydraulic and pneumatic principles. Equipment
includes flow, pressure, level and temperature
transmitters, control valve etc. Ensures that all
instruments operate efficiently and effectively
mostly Honeywell, ABB, Foxboro, Endress & Hauser
and Siemens Instruments.
Commissions, calibrates and diagnoses faults in
instruments, includes analyzing instruments to
determine faults and repair requirements. Assist
vendors for installation of SCADA system including
commissioning. Estimates material requirements.
Includes completing of work orders, materials
requisitions etc.
Carry out all activities in accordance with company
safety procedures and manufacturers
recommendations, following all safety instructions
and notices and wearing protective equipment at all
times. And participates in the training of Emirates
nationals who may be assigned to his unit from time
to time.
March 1994 - 1998 ABV Rock KB
Saudi Arabia
Instrument/Electrical Technician - Maintenance
Carry out skilled preventive and breakdown
maintenance and testing of electrical equipment
including troubleshooting problems, dismantling,
testing, and replacing/repairing various type of
electrical equipment in accordance with agreed
specifications. Install, test, connects,
commissions, maintains and modifies electrical
equipment, wiring and control systems for the Plant
electrical equipment and distribution control
systems.
Installs, modifies, maintains and repairs
electrical equipment such as generators, pump
motors, air conditioners, water treatment plant
instruments, PLC and frequency drives mostly ABB.
Carry out preventive and routine maintenance
according to the maintenance schedule or as
specifically directed. This includes mainly
checking all electrical equipment and connections,
such as switchboards, relay cabinets, as well as
routine maintenance on switchgear, batteries,
transformers check-up of oil levels and silica gel
for moistures. Adjust faulty conditions and updates
records accordingly.
Performs various tests and inspections in plant
site equipment. Collect and review electrical
drawings, piping and instruments drawings and
coordinates to concerned personal for proper
installation and modification in accordance of
approved specifications and standard.
PHILIPPINES
Jan. 1991 - 1993 LM Engineering Power
Corporation Cebu City
Electrical Foreman - Mactan International Airport
Project
Supervises the activities of assigned personnel in
electrical construction of power substation,
installation of transformers and switchgear to
ensure new installations are in accordance with
approved specifications and requirements and
continuity of circuit.
Commissions, carries out various test and
inspection in navigation equipment. This includes
mainly checking all electrical equipment and
connections, such as switchboards and relay
cabinets. Collect and review electrical drawings,
piping and instruments drawings and coordinates to
concerned personal for proper installation and
modification in accordance of approved
specifications and standards.
Estimate material requirements. Ensures the
accurate estimation of material requirements to
minimize material wastage. Initiates requisitions
for spares from stock in warehouse as required.
Reports shortages in commonly used materials as
identified and notifies supervisor.
Prepares daily work reports detailing manpower
utilized, jobs carried out, time spent, etc.
Assists in the preparation of weekly and monthly
reports as required.
Carry out all activities in accordance with company
safety rules, following all safety instructions and
notices. Maintains worksite in a clean, neat and
tidy condition, and wearing of protective equipment
at all times.
Education 1983-1988 University of San-Jose Recoletos
Cebu City, Phil's.
B.S Electrical Engineering Graduated.
Passed the Board of Registered Master Electrician -
2001
PROFICIENCY / TRAINING ATTAINDED
Cadet Engineer, APO Cement Corp. - 1989
Engineering Assistant, Phil. Telegraph and
Telephone - 1990
Hand's on training in AUTOCADD, Asian Computer
Institute - 1997
Basic Safety Training Course, University of Cebu -
2009
Proficiency In Survival Craft and Rescue Boats,
SIMS - 2010
Advance Training In Fire Fighting, SIMS - 2011
Ratings Forming Part of Engineering Watch keeping,
SIMS - 2011
Ship Security Awareness, SIMS - 2010
Shipboard Safety Culture, Italian Maritime Academy
- 2011
Anti-Piracy Awareness Training, SEABREEZE - 2010
Interests Electrical Supervisor and Chief Electrician,
Maintenance Planner
Tips Computer literate, knowledge in software, hardware
and LAN application Knowledge in MS Project, API &
ORACLE application for maintenance planning.
LENGTH OF SEVICE IN LANDBASE AND SEABASE RELATED
WORKS
23 years of experience
Personal Data:
Nationality: Filipino
Date of Birth: September 21, 1966
Age: 48 years old
Place of Birth: Cebu City, Philippines
Height: 5ft. and 5 inches
Civil Status: Married
Email Ad: *************@*****.***
Contact No. +639*********, +639********* - Philippines
References:
Miss Margaret Daynata
Capt. Reynaldo Copia
Crewing Staff
Floating Crane Superintendent
Elburg Shipmanagement Elburg
Shipmanagement
AXA Bldg. Makati City
AXA Bldg. Makati City
Tel +639*********
Tel +639*********
Additional Resume Info:
. I worked in Ma'aden Saudi Arabian Mining Company as Instrument
Techniciann and Acting In-Charge of maintenance planning besides of my
normal duties. I'm also responsible in repair and diagnose of our
networks computers hardware, maintain personal computers, including
installation of new unit network computers and upgrades computer
hardware and software. I'm also participated in ORACLE application
maintenance management system.
. Can operate heavy equipment like pay loader, skid loader (BOBCAT) and
tractor. Experienced of electro hydraulic system repair such as mine
drill rigs machine (CATERPILLAR), LIEBHERR heavy duty crane, mobile
air compressor (ATLAS Copco) and repair of automotive vehicle.
I hereby state that all the information above are true and correct to the
best of my knowledge.
[pic]
Richard S. Rodrigo
Applicant
Contact this candidate