Instrument Technician

ORLANDO M. VALENCIA

INSTRUMENT TECHNICIAN

Address: *** *****. #* ******-****** Street San Jose

BALANGA, BATAAN, PHILIPPINES 2100

CONTACT NO: +639*********, +639*********

*******.**********@*****.***.**

Email Address:

Qualifications:

Certificate in Installation/Calibration and Configuration for Process Instrumentation and Control Servicing

NCII.

Experienced of over 9 years, in Instrumentation which covers Operation and Maintenance, Instrument

Analyzer, Commissioning, Construction that involves several Industries with Hazardous Environments like

Petrochemical and Onshore Gas.

Performing calibration and configuration on various SMART electronics instruments used for Process

Control and Monitoring such as Honeywell, Rosemount etc., with the use of HART Communicator Model

275/375/475 or other protocol.

Familiarization on vibration monitoring systems.

Commissioning of different Fire and Gas Monitoring and ESD systems such as electronics, Micro pack,

VESDA (Very Early Smoke Detection Alarm).

Experienced in Troubleshooting of Instrumentation upsets during process operation.

Knowledge and familiarization on Plant references like different drawings and diagrams such as P&ID,

Instrument Loop Diagrams and Electrical wiring Diagram.

Performed maintenance and overhauling on various Pneumatic Control Valves such as Control Valves and

On/Off Valves.

Comply with HSE regulations and ability to work in minimum supervision.

TRAINING Certificate

ELECTROTECHNICAL Institute E/I

The Process Instrumentation and Control School

Course: Installation/Calibration and Configuration NC-II 238 Hours

Date: July 7, 2014 – August 15, 2014

Address: BALANGA City Bataan PHILIPPINES

Technical EDUCATION and SKILLS DEVELOPMENT AUTHORITY

DEPARTMENT of Labor and EMPLOYEMENT

Course: INSTRUMENT AND CONTROL SERVICING

Address: BALANGA City Bataan PHILIPPINES

Certificate of Competency;

Unit Tittle: Unit Code:

Participate in Workplace Communication 500311105

Work in Team Environment 500311106

Practice Career Professionalism 500311107

Practice Occupational Health and Safety Procedures 500311108

Use Hard Tools ELC724201

Perform Mensuration and Calculation ELC311201

Prepare and Interpret Technical Drawing ELC311202

Apply Quality Standards ELC315202

Perform Computer Operations ELC311203

Terminate and Connect Electrical Wiring & Electronic Circuits ELC724202

Install Instrumentation and Control Devices ELC724301

Calibrate Instrumentation and Control Devices ELC724302

Configure Instrumentation and Control Devices ELC724303

Refresher Course of Basic First Aid and Training

Date: July 08, 2009

Address: MAN FERROSTAAL Oil / Gas Ltd. WAFA Camp. Premises Libya

Under the following:

- Asses an emergency case and summon appropriate assistance

- Identify, as much as possible, the injury

- Provide immediate appropriate and adequate first aid treatment

- Arrange for the immediate hand over of the patient to care of a doctor.

Firefighting Safety Training Course

Date: November 19. 2008

Address: G1 Camp. Premises Man FERROSTAAL Oil / Gas Ltd. Libya

Safety Worker of the Month Dec. 2007

Date: January 12, 2008

Address: MMG PC2 Monomer PROJECT RABIGH, KSA

Confined Space Training

Date: April 27, 2007

Address : MMG PC2 Monomer PROJECT RABIGH, KSA

WORK EXPERIENCE:

Position: MAINTENANCE INSTRUMENT TECHNICIAN

COMPANY: DIETSMANN, D.M.N. STAFFING SERVICE LTD

Address: MELLITAH Oil/ Gas B.V. WAFA DESERT PLANT (LIBYA)

Date: July 7, 2013 – July 4, 2014

JOB DESCRIPTION:

• Inspect tests, adjusts, and repairs electric, electronic, mechanical, and pneumatic instruments

and systems used to indicate, record, and control generating operations in conventional or

nuclear power electric generating plant: Inspects meters, indicators, and gauges to detect

abnormal fluctuations.

• Potentiometers, pulse and signal generators, oscilloscopes, transistor curve tracers, and

ammeters, voltmeters, and watt meters.

• Removes defective instruments from system, decontaminates, disassembles, and cleans

instruments, and replaces defective parts, using hand tools.

• Reassembles instruments and replaces instruments in system, using hand tools.

• Lubricates instruments and replaces defective wiring and tubing.

• Calibrates readings on instruments according to standards and adjusts phasing and aligns stages

to ensure accuracy of recording and indicating function.

• Records calibrations made, parts and components used, and inventory of parts on hand.

• Prepares schematic drawings, sketches, and reports to reflect changes or alterations made in

instruments, circuits, and systems.

• May be designated according to type power plant as Nuclear-Plant-Instrument Technician;

Instrument Repairer, Steam Plant.

Position: MAINTENANCE INSTRUMENT TECHNICIAN

COMPANY: MAN FERROSTAAL OIL/ GAS DIVISION LIBYA

Address: Oil/ Gas WINTERSHALL DESSERT OPERATION C96 & C97 NAFOORA PLANT (LIBYA)

Date: July 12, 2012 – July 3, 2013

• Accountable for the execution of maintenance activities, ensuring permits, tools, materials,

equipment, work site preparation, and all supporting documentation, are in place

• Identify requirements that will enable self-development within role and actively contribute as

required

• Carrying out planned maintenance activities in accordance with the requirements of the planned

maintenance system

• Assisting with the coordination of spare parts requirements and the optimization of spares stack

levels

• Carrying out unplanned maintenance as required

• Minimize downtime and contribute to the achievement of production targets

• Preparing technical reports as required

• Responsible for ensuring any individual gaps in your competency standards are closed out on a

timely basis

• Comply with company training, competency and personal development programs

• Liaise with other departments/technicians as required ensuring effective/efficient delivery of the

agreed plans

• Ensure equipment, systems and work sites are reinstated to the required standard

• Ensure work history is comprehensively recorded in line with Maximo data quality requirements

• Identify, document and communicate all follow up work and material requirements or other

relevant data e.g. ordering materials against work orders

• Demonstrate a flexible approach to overall team performance and delivery, for example, co-

ordinate vendor/subcontractor activities, shutdown preparations, multi-tasking, etc.

Position: INSTRUMENT TECHNICIAN

COMPANY: GFT CONSTRUCTION SERVICE

Address: BATAAN PETRON POWER PLANT PROJECT

VP ROQUE BLDG., ROMAN HIGHWAY LAMAO, LIMAY, BATAAN

Date: JULY 20, 2011 – June 20, 2012

JOB DESCRIPTION:

• Tests accuracy of flow meters, pressure gauges, temperature indicators, controllers, radiation

counters or detectors and other recording, indicating or controlling instruments to locate

defective components in system, using test equipment, such as pressure gauges.

• Reassembles instruments and replaces instruments in system, using hand tools.

• Lubricates instruments and replaces defective wiring and tubing.

• Calibrates reading on instruments according to standards and adjusts phasing and aligns stages

to ensure accuracy of recording and indicating function.

• Records calibrations made, parts and components used, and inventory of parts on hand.

Position: MAINTENANCE INSTRUMENT TECHNICIAN

COMPANY: MAN FERROSTAAL OIL/ GAS DIVISION LIBYA

Address: GENERAL MAINTENANCE SERVICE CONTRACT UHDE GmbH

MELLITAH Oil/ Gas B.V. WAFA DESERT PLANT (LIBYA)

Date: Aug.20, 2008 – March 01, 2011

JOB DESCRIPTION:

• Field calibration of instrumentation utilizing proper test equipment;

• Complete overhaul in shop environment to include component replacements, alignments and

calibration to specifications of record;

• Instrumentation to include pneumatic, electronic and digital equipment;

• Installation of new control circuits, modification of existing instrument/electrical systems as

requested, to include design, load and Implementation of new control logic;

• Fault analysis of PLC based systems with control logic modification if required.

Position: INSTRUMENT TECHNICIAN

Company: MOHAMMAD AL-MOJIL GROUP

Address: PC2 PO Project RABIGH, KINGDOM SAUDI ARABIA

Date: February 20, 2007 to March 20, 2008

JOB DESCRIPTION:

• Checked all kinds of instrument, inspection of calibration test, loop check, pre-commissioning

with total time response resulting from a sudden increase in the rate of change in the input

from zero to some finite valve.

• Perform calibration of pressure switches, temperature and level switches.

• Assigned in the cable termination in marshaling panel MC junction boxes and field

instruments.

• Lay-outing of conduits for instrument cable.

• Lay-outing cable tray, tubing for impulse lines air and hydraulic lines for primary connection

to secondary connection.

• Assigned in workshop dealing with calibration of different kinds of instrument such as

interface level controller transmitter temperature and pressure switches and gauges.

• In-charge of some crafts for daily activities and accomplishment to be submitted to

managing heads.

• Prepare daily time records for all subordinated personnel.

• Responsible for maintaining of plant equipment and do supervision in commissioning and

calibration of different electrical instruments.

• Plan, organize and direct activities in both electrical instrumentation works at tanks and daily

time records.

• Strictly enforce company rules and regulations, quality and safety policies.

• Hands on competency operating, calibrating, troubleshooting and repairing equipment such

as transmitters analyzers, pneumatic and hydraulic devices, and valves

Position: INSTRUMENT TECHNICIAN

COMPANY: ATS CONST. INT’L.INC.

Address: Petrochemicals Development Project BATANGAS II,

MARIVELES, Bataan

Date: February 6, 2003 to February 19, 2005

JOB DESCRIPTION:

• Assigned calibration of various instrument in the field and functional checking of control valves.

Performed commissioning works.

• Logic and sequence Function check of ESD / F&G systems with associated cause and effects,

indication alarms and start-up overrides.

• Install type of tubing’s such as stainless steel, copper carbon steel, and capillary tubing’s, install

of vibration switches, control valves, transducer controller, converted, orifice plate, instrument

brackets.

• Installation of different type of electronic and pneumatic instrument such as pressure

transmitter, level transmitter indicator and switches.

PERSONAL DATA:

Date of Birth: February 14, 1972

Place of Birth: BALANGA, Bataan

Sex: Male

Height: 5`8”

Citizenship: Filipino

Civil Status: Married

Language: English & Filipino

Religion; Roman Catholic

Spouse Name: MARIA MARTINNELA B. VALENCIA

Children: MARTIN MOLAINE MICKEL B. VALENCIA (19 y/o)

MART MOLAND MIKO B. VALENCIA (18 years. old)

MAXENE MAEHEART MIEL B. VALENCIA (9 y/o)

Personal to contact in case Of emergency:

• MARIA MARTINNELA B. VALENCIA ( Wife )

• Address: 438 Apart. #2 Waling-Waling Street San Jose

BALANGA City, Bataan 2100

• Telephone: +639*********, +639*********

EDUCATIONAL ATTAINMENT:

• Secondary: Pablo Roman High School PILAR, Bataan

1985 – 1991

• Primary: ALA-ULI Elementary School PILAR, Bataan

1979-1985

PERSONAL IDENTIFICATION:

• Passport No. - BE2486015

• Issued At: - DFA PAMP.

• NBI No. - V16104CIADO0000

• SSS No. - 021298329

• Individual Taxpayers Card - V4523-B1472-A-5

• PHILHEALTH No. - 19-089246627-4

• Driver License No. - C02-03-081574

I HEREBY CERTIFY that all information written above is true and correct to the best of my

knowledge and belief.

Contact this candidate