Technician Engineering
Resume:
John Domin 408-***-****
JOHN DOMIN
San Jose, CA 95112
Phone 408-***-****
acomq0@r.postjobfree.com
OBJECTIVE – ELECTRONIC TECHNICIAN 151414
SUMMARY OF QUALIFICATIONS
* Measured characteristics of ICs, rise time, propagation delay, fall time, ability to drive a load.
* Measured the input capacitance of all data lines on cache RAM chips from different manufacturers.
* Validated analog, digital, and RF circuit boards using Automated Test Equipment.
* Measured characteristics of ICs from -20 Celsius to + 50 Celsius.
* Troubleshoot and repaired analog, digital, and RF circuit boards.
* Investigated new products using oscilloscope, spectrum analyzer and vector network analyzer.
* Performed R&D electronic lab experiments from both written and verbal instructions.
* Tested subassemblies, built final assemblies, and tested final assemblies.
* Read schematics. Soldered and unsoldered both surface mount components and fine pitch ICs.
* Assembled test fixtures to test integrated circuits and circuit boards.
* Worked with little or no supervision.
* Used various hand tools such as wire strippers, crimpers, pliers, screw driver.
* Used various power supplies, signal generators, hand held multimeters and LCR meters.
* Stuffed boards, wire wrapped boards, built harness.
* Windows 8.1, Windows 7, Office 2007, Perl, Python, UNIX, LINUX, DOS.
* Microsoft Word, Excel, Access, and PowerPoint.
* Educated in Android, Java, C, C++, Python, Perl, and SQL programming.
* Four semesters of CCNA at Mission College, Santa Clara.
* Documented the results of electronics measurements and stored the results in paper and electronic files.
* Worked on product development teams and communicated results to team members with oscilloscope plots.
* Built co-axial cables with BNC and SMA connectors.
* Read engineering drawings, drilled circuit boards, and did ECOs on RF equipment.
* Measured characteristics of ICs from -20 Celsius to + 50 Celsius.
* Aligned lasers and measured laser beam profiles, M-squared, power, Q-Switched laser pulse width.
* Assembled wave-guides and did lab experiments at 10GHz.
* Tuned antenna circuits.
* Educated in Schematic Capture with Cadence PSpice.
* Windows Server 2008 Network Infrastructure and Active Directory Configuration.
PROFESSIONAL EXPERIENCE
ASSEMBLER- TECHNICIAN- HIREForces, 408-***-**** Assembled CRAY Xeon Cluster supercomputers.
Installed motherboard in module, installed two Intel Xeon 8 core microprocessor in each module, installed four 8 GB
memory cards, installed harness, inserted forty modules in supercomputer frame. June 26, 2013 – July 2, 2013
STUDENT, MISSION COLLEGE, and SAN JOSE CITY COLLEGE 2013 Spring semester
Four semesters of CCNA, Linux, 2008 Server, Windows 7, CompTIA A+ classes, C++ programming language. Theory
and practical experiments with lasers, Theory and measurements of laser beams. SQL.
GE SECURITY, assembler technician, Newark, CA, (Adecco Temporary) 8/2007 – 1/25/08
ASSEMBLE X-ray detector modules composed of circuit boards and crystals. TEST the modules and repair. Run an 8-
hour burn-in. RETEST the modules after burn-in. Arrange the modules so that the gain fit a Gaussian curve. LOG in
defective modules from airports all over the world. Repair, test, and burn-in defective X-ray modules.
STUDENT, San Jose City College, Math and Engineering courses 6/2002 – 8/2007
2
John Domin 408-***-****
VOLUNTEER, San Jose unified School district 2002 – 2004
Helped students that were having trouble with English
SAVI TECHNOLOGY, engineering technician, Sunnyvale, CA 6/2000-6/2002
MEASURED AND ADJUSTED carrier frequency and bandwidth on low power RF transmitters using spectrum
analyzer. Tested functionality of RF embedded system using Texas Instruments low power processor on test bed and
recorded results in Excel spreadsheet. TESTED, DEBUGGED and REPAIRED circuit boards for reading
electromagnetic identification tags used on pallets in supply chain technology.
ASSEMBLER IN SALT LAKE CITY, (Kelly Services, Peak Staffing) 8/99-3/2000
REWORK Used a RF soldering iron to replace components in LAN boards and Internet boards that plugged into
laptop computers. REPAIRED modems and internet cards used in laptop computers at 3-COMM repair depot.
REPLACED SMT components, REFLOWED solder joints on memory chips and REPLACED connectors.
INTEGRATED CIRCUIT SYSTEMS, engineering technician San Jose (Total Technical Services) 5/99-6/99
INPUT a fixed frequency square wave into multiple output clock chips and measured output waveforms on an
oscilloscope. INPUT variable frequency square waves into clock drivers and measured waveform distortion as
frequency was varied. BUILT AND TESTED test fixtures for measuring clock circuits
INTEGRATED SENSOR SOLUTIONS, engineering technician San Jose, CA (Oxford Temps) 2/98-5/98
TESTED AND REWORKED 2.5 GHZ low power transmitters for measuring tire pressure in Caterpillar tractor tires.
MEASURED carrier frequency and bandwidth with HP spectrum analyzer. BUILT hand held antenna. REPLACED
fine pitch Texas Instruments microprocessors in embedded system. PURCHASED parts.
MOLECULAR DYNAMICS, engineering technician Sunnyvale (Aerotek Contract Engineering) 9/97-12/97
TESTED all circuit boards in a medical system. FORMATTED hard drives and LOADED Windows NT.
ASSEMBLED all circuit boards into final assembly and PERFORMED system tests. DEBUGGED and REPAIRED
final assembly.
INTERACTIVE EFX, test and repair technician Sunnyvale, CA (Oxford Temps) 12/96-5/97
REWORK Applied hot air blast to microprocessors and removed them from circuit boards. Build a shelter from sheet
aluminum to prevent the hot air blast from removing all the small components adjacent to the microprocessor.
Replaced the microprocessors. TROUBLESHOT and REPAIRED 486 motherboards used in dedicated LAN
computers. PERFORMED BIOS test. REPAIRED I/O controllers, clock lines, bus controllers, video controllers, and
LAN controllers. Replaced D-latches used as bus drivers.
ETEC SYSTEMS, engineering technician Hayward, CA (Superior Temps) 9/96-12/96
TROUBLESHOT and REPAIRED digital circuit boards in an ion implantation system. Repaired static and dynamic
RAM and video cards. CONFIGURED motherboard with 5 Motorola microprocessors.
COMPRESSION LABS, engineering technician San Jose, CA (Sequent Temporary) 12/95-3/96
UPGRADED video transmitters used in teleconferencing. FORMATTED hard drives and loaded new software.
PERFORMED final test. SOLVED major problem by installing voltage divider terminators on bus.
ERICSSON RAYNET, engineering technician Menlo Park, CA (Hall Kinion) 8/95-12/95
CONVERTED rack of test equipment from 110 to 220 volts. TESTED and REPAIRED circuit boards used on the
German Internet. REPAIRED power supplies. BUILT test fixtures. REPAIRED test fixtures.
SCHLUMBERGER TECHNOLOGIES, engineering technician San Jose, CA (Oxford Temps) 4/95-8/95
BUILT and TESTED automatic test equipment, including BUILDING wiring harness, and WIRE WRAPPING circuit
boards. WROTE documentation for constructing the test equipment.
TANDEM COMPUTERS, engineering technician Cupertino, CA (Oxford Temps) 10/94-1/95
BUILT test fixtures. MEASURED rise time, fall time and propagation delay on CMOS and BI-CMOS ICs while
varying the load impedance. REPEATED the tests at 0, 20 and 50 degrees Celsius.
3
John Domin 408-***-****
BROWNLEE PRECISION CO., engineering technician Santa Clara, CA 8/94-10/94
ASSEMBLED, TESTED and SHIPPED analog instrumentation amplifiers used in genome project. KITTED parts.
SOLDERED all parts onto circuit board. REWIRED power supplies for 110, 220 volts. BUILT and WIRED cage.
ASSEMBLED, TESTED and DEBUGGED system. PACKAGED and SHIPPED system.
MEGATEST, engineering technician San Jose, CA (Fastek Technical) 5/93-9/93
LOADED software into timing boards used in Automatic Test Equipment. PERFORMED system tests at several clock
frequencies. TROUBLESHOT and REPAIRED failures on ECL circuit boards.
TANDEM COMPUTERS, engineering technician Cupertino, CA 6/89-6/92
Constructed test fixtures for measuring the input-output characteristics of ICs.
Measured the ability of ICs to drive a load. Changed the RC combination at the end of the trace and plotted the results
using an HP sampling scope and an HP printer. Built a chamber that attached to a Temptronix oven-refrigerator and
measure IC characteristics at -30, +30, and +50 degrees Celsius. Built a test fixture and using an HP spectrum analyzer,
measured the input capacitances on all of the input pins of cache RAM chips from several manufacturers.
EDUCATION: ELECTRICAL ENGINEERING
MISSION COLLEGE, SANTA CLARA, Android, Java, Cisco networking classes,
Python, Perl, Linux.
SAN JOSE CITY COLLEGE, Laser courses, engineering, and advanced math.
COGSWELL COLLEGE, Sunnyvale, CA, courses in electrical engineering.
DE ANZA COLLEGE, Cupertino, CA, courses in computer science
SAN JOSE STATE UNIVERSITY, San Jose, CA, courses in electrical engineering.
Contact this candidate